include/configs/xpedite520x.h

   1 /*
   2  * Copyright 2008 Extreme Engineering Solutions, Inc.
   3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * xpedite520x board configuration file
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17 #define CONFIG_XPEDITE5200      1
  18 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  19 #define CONFIG_SYS_FORM_PMC_XMC 1
  20 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  21
  22 #ifndef CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  24 #endif
  25
  26 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  27 #define CONFIG_PCI1             1       /* PCI controller 1 */
  28 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  29 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  30 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  31
  32 /*
  33  * DDR config
  34  */
  35 #define CONFIG_SYS_FSL_DDR2
  36 #undef CONFIG_FSL_DDR_INTERACTIVE
  37 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  38 #define CONFIG_DDR_SPD
  39 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  40 #define SPD_EEPROM_ADDRESS              0x54
  41 #define CONFIG_NUM_DDR_CONTROLLERS      1
  42 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  43 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  44 #define CONFIG_DDR_ECC
  45 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  46 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  47 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  48 #define CONFIG_VERY_BIG_RAM
  49
  50 #define CONFIG_SYS_CLK_FREQ     66666666
  51
  52 /*
  53  * These can be toggled for performance analysis, otherwise use default.
  54  */
  55 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  56 #define CONFIG_BTB                      /* toggle branch predition */
  57 #define CONFIG_ENABLE_36BIT_PHYS        1
  58
  59 #define CONFIG_SYS_CCSRBAR              0xef000000
  60 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  61
  62 /*
  63  * Diagnostics
  64  */
  65 #define CONFIG_SYS_ALT_MEMTEST
  66 #define CONFIG_SYS_MEMTEST_START        0x10000000
  67 #define CONFIG_SYS_MEMTEST_END          0x20000000
  68 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
  69                                          CONFIG_SYS_POST_I2C)
  70 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
  71                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
  72                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
  73                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
  74                                          CONFIG_SYS_I2C_RTC_ADDR}
  75
  76 /*
  77  * Memory map
  78  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  79  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  80  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  81  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  82  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  83  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  84  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
  85  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
  86  */
  87
  88 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
  89
  90 /*
  91  * NAND flash configuration
  92  */
  93 #define CONFIG_SYS_NAND_BASE            0xef800000
  94 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
  95 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  96 #define CONFIG_NAND_ACTL
  97 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
  98 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
  99 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
 100 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 101
 102 /*
 103  * NOR flash configuration
 104  */
 105 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 106 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
 107 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 108 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 109 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 110 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 111 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 112 #define CONFIG_FLASH_CFI_DRIVER
 113 #define CONFIG_SYS_FLASH_CFI
 114 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 115 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 116                                                   {0xfbf40000, 0xc0000} }
 117 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 118
 119 /*
 120  * Chip select configuration
 121  */
 122 /* NOR Flash 0 on CS0 */
 123 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 124                                  BR_PS_16               | \
 125                                  BR_V)
 126 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 127                                  OR_GPCM_ACS_DIV4       | \
 128                                  OR_GPCM_SCY_8)
 129
 130 /* NOR Flash 1 on CS1 */
 131 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 132                                  BR_PS_16               | \
 133                                  BR_V)
 134 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 135
 136 /* NAND flash on CS2 */
 137 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 138                                  BR_PS_8                | \
 139                                  BR_V)
 140
 141 /* NAND flash on CS2 */
 142 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 143                                  OR_GPCM_BCTLD          | \
 144                                  OR_GPCM_CSNT           | \
 145                                  OR_GPCM_ACS_DIV4       | \
 146                                  OR_GPCM_SCY_4          | \
 147                                  OR_GPCM_TRLX           | \
 148                                  OR_GPCM_EHTR)
 149
 150 /* NAND flash on CS3 */
 151 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 152                                  BR_PS_8                | \
 153                                  BR_V)
 154 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 155
 156 /*
 157  * Use L1 as initial stack
 158  */
 159 #define CONFIG_SYS_INIT_RAM_LOCK        1
 160 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 161 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
 162
 163 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 164 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 165
 166 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 167 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 168
 169 /*
 170  * Serial Port
 171  */
 172 #define CONFIG_CONS_INDEX               1
 173 #define CONFIG_SYS_NS16550_SERIAL
 174 #define CONFIG_SYS_NS16550_REG_SIZE     1
 175 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 176 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 177 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 178 #define CONFIG_SYS_BAUDRATE_TABLE       \
 179         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 180 #define CONFIG_BAUDRATE                 115200
 181 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 182 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 183
 184 /*
 185  * I2C
 186  */
 187 #define CONFIG_SYS_I2C
 188 #define CONFIG_SYS_I2C_FSL
 189 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 190 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 191 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 192 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 193 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 194 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 195
 196 /* I2C EEPROM */
 197 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 198 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 199 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 200 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 201
 202 /* I2C RTC */
 203 #define CONFIG_RTC_M41T11                       1
 204 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 205 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 206
 207 /* GPIO */
 208 #define CONFIG_PCA953X
 209 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 210 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 211 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 212
 213 /* PCA957 @ 0x18 */
 214 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 215 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 216 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 217 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 218 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 219 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
 220 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 221 #define CONFIG_SYS_PCA953X_EREADY               0x80
 222
 223 /* PCA957 @ 0x19 */
 224 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 225 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 226 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 227 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 228 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 229 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 230 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 231 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 232
 233 /* 12-bit ADC used to measure CPU diode */
 234 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
 235
 236 /*
 237  * General PCI
 238  * Memory space is mapped 1-1, but I/O space must start from 0.
 239  */
 240 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 241 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 242 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 243 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 244 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 245 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 246
 247 /*
 248  * Networking options
 249  */
 250 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 251 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 252 #define CONFIG_MII              1       /* MII PHY management */
 253 #define CONFIG_ETHPRIME         "eTSEC1"
 254
 255 #define CONFIG_TSEC1            1
 256 #define CONFIG_TSEC1_NAME       "eTSEC1"
 257 #define TSEC1_FLAGS             TSEC_GIGABIT
 258 #define TSEC1_PHY_ADDR          1
 259 #define TSEC1_PHYIDX            0
 260 #define CONFIG_HAS_ETH0
 261
 262 #define CONFIG_TSEC2            1
 263 #define CONFIG_TSEC2_NAME       "eTSEC2"
 264 #define TSEC2_FLAGS             TSEC_GIGABIT
 265 #define TSEC2_PHY_ADDR          2
 266 #define TSEC2_PHYIDX            0
 267 #define CONFIG_HAS_ETH1
 268
 269 #define CONFIG_TSEC3    1
 270 #define CONFIG_TSEC3_NAME       "eTSEC3"
 271 #define TSEC3_FLAGS             TSEC_GIGABIT
 272 #define TSEC3_PHY_ADDR          3
 273 #define TSEC3_PHYIDX            0
 274 #define CONFIG_HAS_ETH2
 275
 276 #define CONFIG_TSEC4    1
 277 #define CONFIG_TSEC4_NAME       "eTSEC4"
 278 #define TSEC4_FLAGS             TSEC_GIGABIT
 279 #define TSEC4_PHY_ADDR          4
 280 #define TSEC4_PHYIDX            0
 281 #define CONFIG_HAS_ETH3
 282
 283 /*
 284  * BOOTP options
 285  */
 286 #define CONFIG_BOOTP_BOOTFILESIZE
 287 #define CONFIG_BOOTP_BOOTPATH
 288 #define CONFIG_BOOTP_GATEWAY
 289
 290 /*
 291  * Command configuration.
 292  */
 293 #define CONFIG_CMD_DATE
 294 #define CONFIG_CMD_EEPROM
 295 #define CONFIG_CMD_JFFS2
 296 #define CONFIG_CMD_NAND
 297 #define CONFIG_CMD_PCA953X
 298 #define CONFIG_CMD_PCA953X_INFO
 299 #define CONFIG_CMD_PCI
 300 #define CONFIG_CMD_PCI_ENUM
 301 #define CONFIG_CMD_REGINFO
 302
 303 /*
 304  * Miscellaneous configurable options
 305  */
 306 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 307 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 308 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 309 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 310 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 311 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 312 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
 313 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
 314 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 315 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 316 #define CONFIG_PREBOOT                          /* enable preboot variable */
 317 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 318 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 319
 320 /*
 321  * For booting Linux, the board info and command line data
 322  * have to be in the first 16 MB of memory, since this is
 323  * the maximum mapped by the Linux kernel during initialization.
 324  */
 325 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 326 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 327
 328 /*
 329  * Environment Configuration
 330  */
 331 #define CONFIG_ENV_IS_IN_FLASH  1
 332 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 333 #define CONFIG_ENV_SIZE         0x8000
 334 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 335
 336 /*
 337  * Flash memory map:
 338  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 339  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 340  * fff00000 - fff3ffff     Pri FDT (256KB)
 341  * fef00000 - ffefffff     Pri OS image (16MB)
 342  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 343  *
 344  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 345  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 346  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 347  * faf00000 - fbefffff     Sec OS image (16MB)
 348  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 349  */
 350 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
 351 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
 352 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
 353 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
 354 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 355 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
 356
 357 #define CONFIG_PROG_UBOOT1                                              \
 358         "$download_cmd $loadaddr $ubootfile; "                          \
 359         "if test $? -eq 0; then "                                       \
 360                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 361                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 362                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 363                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 364                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 365                 "if test $? -ne 0; then "                               \
 366                         "echo PROGRAM FAILED; "                         \
 367                 "else; "                                                \
 368                         "echo PROGRAM SUCCEEDED; "                      \
 369                 "fi; "                                                  \
 370         "else; "                                                        \
 371                 "echo DOWNLOAD FAILED; "                                \
 372         "fi;"
 373
 374 #define CONFIG_PROG_UBOOT2                                              \
 375         "$download_cmd $loadaddr $ubootfile; "                          \
 376         "if test $? -eq 0; then "                                       \
 377                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 378                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 379                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 380                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 381                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 382                 "if test $? -ne 0; then "                               \
 383                         "echo PROGRAM FAILED; "                         \
 384                 "else; "                                                \
 385                         "echo PROGRAM SUCCEEDED; "                      \
 386                 "fi; "                                                  \
 387         "else; "                                                        \
 388                 "echo DOWNLOAD FAILED; "                                \
 389         "fi;"
 390
 391 #define CONFIG_BOOT_OS_NET                                              \
 392         "$download_cmd $osaddr $osfile; "                               \
 393         "if test $? -eq 0; then "                                       \
 394                 "if test -n $fdtaddr; then "                            \
 395                         "$download_cmd $fdtaddr $fdtfile; "             \
 396                         "if test $? -eq 0; then "                       \
 397                                 "bootm $osaddr - $fdtaddr; "            \
 398                         "else; "                                        \
 399                                 "echo FDT DOWNLOAD FAILED; "            \
 400                         "fi; "                                          \
 401                 "else; "                                                \
 402                         "bootm $osaddr; "                               \
 403                 "fi; "                                                  \
 404         "else; "                                                        \
 405                 "echo OS DOWNLOAD FAILED; "                             \
 406         "fi;"
 407
 408 #define CONFIG_PROG_OS1                                                 \
 409         "$download_cmd $osaddr $osfile; "                               \
 410         "if test $? -eq 0; then "                                       \
 411                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 412                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 413                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 414                 "if test $? -ne 0; then "                               \
 415                         "echo OS PROGRAM FAILED; "                      \
 416                 "else; "                                                \
 417                         "echo OS PROGRAM SUCCEEDED; "                   \
 418                 "fi; "                                                  \
 419         "else; "                                                        \
 420                 "echo OS DOWNLOAD FAILED; "                             \
 421         "fi;"
 422
 423 #define CONFIG_PROG_OS2                                                 \
 424         "$download_cmd $osaddr $osfile; "                               \
 425         "if test $? -eq 0; then "                                       \
 426                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 427                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 428                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 429                 "if test $? -ne 0; then "                               \
 430                         "echo OS PROGRAM FAILED; "                      \
 431                 "else; "                                                \
 432                         "echo OS PROGRAM SUCCEEDED; "                   \
 433                 "fi; "                                                  \
 434         "else; "                                                        \
 435                 "echo OS DOWNLOAD FAILED; "                             \
 436         "fi;"
 437
 438 #define CONFIG_PROG_FDT1                                                \
 439         "$download_cmd $fdtaddr $fdtfile; "                             \
 440         "if test $? -eq 0; then "                                       \
 441                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 442                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 443                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 444                 "if test $? -ne 0; then "                               \
 445                         "echo FDT PROGRAM FAILED; "                     \
 446                 "else; "                                                \
 447                         "echo FDT PROGRAM SUCCEEDED; "                  \
 448                 "fi; "                                                  \
 449         "else; "                                                        \
 450                 "echo FDT DOWNLOAD FAILED; "                            \
 451         "fi;"
 452
 453 #define CONFIG_PROG_FDT2                                                \
 454         "$download_cmd $fdtaddr $fdtfile; "                             \
 455         "if test $? -eq 0; then "                                       \
 456                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 457                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 458                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 459                 "if test $? -ne 0; then "                               \
 460                         "echo FDT PROGRAM FAILED; "                     \
 461                 "else; "                                                \
 462                         "echo FDT PROGRAM SUCCEEDED; "                  \
 463                 "fi; "                                                  \
 464         "else; "                                                        \
 465                 "echo FDT DOWNLOAD FAILED; "                            \
 466         "fi;"
 467
 468 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 469         "autoload=yes\0"                                                \
 470         "download_cmd=tftp\0"                                           \
 471         "console_args=console=ttyS0,115200\0"                           \
 472         "root_args=root=/dev/nfs rw\0"                                  \
 473         "misc_args=ip=on\0"                                             \
 474         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 475         "bootfile=/home/user/file\0"                                    \
 476         "osfile=/home/user/board.uImage\0"                              \
 477         "fdtfile=/home/user/board.dtb\0"                                \
 478         "ubootfile=/home/user/u-boot.bin\0"                             \
 479         "fdtaddr=0x1e00000\0"                                           \
 480         "osaddr=0x1000000\0"                                            \
 481         "loadaddr=0x1000000\0"                                          \
 482         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 483         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 484         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 485         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 486         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 487         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 488         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 489         "bootcmd_flash1=run set_bootargs; "                             \
 490                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 491         "bootcmd_flash2=run set_bootargs; "                             \
 492                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 493         "bootcmd=run bootcmd_flash1\0"
 494 #endif  /* __CONFIG_H */