Merge git://git.denx.de/u-boot-marvell
[platform/kernel/u-boot.git] / include / configs / xpedite520x.h
1 /*
2  * Copyright 2008 Extreme Engineering Solutions, Inc.
3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * xpedite520x board configuration file
10  */
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 /*
15  * High Level Configuration Options
16  */
17 #define CONFIG_BOOKE            1       /* BOOKE */
18 #define CONFIG_E500             1       /* BOOKE e500 family */
19 #define CONFIG_MPC8548          1
20 #define CONFIG_XPEDITE5200      1
21 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
22 #define CONFIG_SYS_FORM_PMC_XMC 1
23 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
24 #define CONFIG_DISPLAY_BOARDINFO
25
26 #ifndef CONFIG_SYS_TEXT_BASE
27 #define CONFIG_SYS_TEXT_BASE    0xfff80000
28 #endif
29
30 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
31 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
32 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
33 #define CONFIG_PCI1             1       /* PCI controller 1 */
34 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
35 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
36 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
37 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
38
39 /*
40  * DDR config
41  */
42 #define CONFIG_SYS_FSL_DDR2
43 #undef CONFIG_FSL_DDR_INTERACTIVE
44 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
45 #define CONFIG_DDR_SPD
46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
47 #define SPD_EEPROM_ADDRESS              0x54
48 #define CONFIG_NUM_DDR_CONTROLLERS      1
49 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
50 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
51 #define CONFIG_DDR_ECC
52 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
53 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
54 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
55 #define CONFIG_VERY_BIG_RAM
56
57 #define CONFIG_SYS_CLK_FREQ     66666666
58
59 /*
60  * These can be toggled for performance analysis, otherwise use default.
61  */
62 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
63 #define CONFIG_BTB                      /* toggle branch predition */
64 #define CONFIG_ENABLE_36BIT_PHYS        1
65
66 #define CONFIG_SYS_CCSRBAR              0xef000000
67 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
68
69 /*
70  * Diagnostics
71  */
72 #define CONFIG_SYS_ALT_MEMTEST
73 #define CONFIG_SYS_MEMTEST_START        0x10000000
74 #define CONFIG_SYS_MEMTEST_END          0x20000000
75 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
76                                          CONFIG_SYS_POST_I2C)
77 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
78                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
79                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
80                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
81                                          CONFIG_SYS_I2C_RTC_ADDR}
82
83 /*
84  * Memory map
85  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
86  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
87  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
88  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
89  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
90  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
91  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
92  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
93  */
94
95 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
96
97 /*
98  * NAND flash configuration
99  */
100 #define CONFIG_SYS_NAND_BASE            0xef800000
101 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
102 #define CONFIG_SYS_MAX_NAND_DEVICE      1
103 #define CONFIG_NAND_ACTL
104 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
105 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
106 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
107 #define CONFIG_SYS_NAND_ACTL_DELAY      25
108
109 /*
110  * NOR flash configuration
111  */
112 #define CONFIG_SYS_FLASH_BASE           0xfc000000
113 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
114 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
115 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
116 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
117 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
118 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
119 #define CONFIG_FLASH_CFI_DRIVER
120 #define CONFIG_SYS_FLASH_CFI
121 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
122 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
123                                                   {0xfbf40000, 0xc0000} }
124 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
125
126 /*
127  * Chip select configuration
128  */
129 /* NOR Flash 0 on CS0 */
130 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
131                                  BR_PS_16               | \
132                                  BR_V)
133 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
134                                  OR_GPCM_ACS_DIV4       | \
135                                  OR_GPCM_SCY_8)
136
137 /* NOR Flash 1 on CS1 */
138 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
139                                  BR_PS_16               | \
140                                  BR_V)
141 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
142
143 /* NAND flash on CS2 */
144 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
145                                  BR_PS_8                | \
146                                  BR_V)
147
148 /* NAND flash on CS2 */
149 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
150                                  OR_GPCM_BCTLD          | \
151                                  OR_GPCM_CSNT           | \
152                                  OR_GPCM_ACS_DIV4       | \
153                                  OR_GPCM_SCY_4          | \
154                                  OR_GPCM_TRLX           | \
155                                  OR_GPCM_EHTR)
156
157 /* NAND flash on CS3 */
158 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
159                                  BR_PS_8                | \
160                                  BR_V)
161 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
162
163 /*
164  * Use L1 as initial stack
165  */
166 #define CONFIG_SYS_INIT_RAM_LOCK        1
167 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
168 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
169
170 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
171 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
172
173 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
174 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
175
176 /*
177  * Serial Port
178  */
179 #define CONFIG_CONS_INDEX               1
180 #define CONFIG_SYS_NS16550_SERIAL
181 #define CONFIG_SYS_NS16550_REG_SIZE     1
182 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
183 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
184 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
185 #define CONFIG_SYS_BAUDRATE_TABLE       \
186         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
187 #define CONFIG_BAUDRATE                 115200
188 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
189 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
190
191 /*
192  * Use the HUSH parser
193  */
194 #define CONFIG_SYS_HUSH_PARSER
195
196 /*
197  * I2C
198  */
199 #define CONFIG_SYS_I2C
200 #define CONFIG_SYS_I2C_FSL
201 #define CONFIG_SYS_FSL_I2C_SPEED        400000
202 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
203 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
204 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
205 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
206 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
207
208 /* I2C EEPROM */
209 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
210 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
211 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
212 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
213
214 /* I2C RTC */
215 #define CONFIG_RTC_M41T11                       1
216 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
217 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
218
219 /* GPIO */
220 #define CONFIG_PCA953X
221 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
222 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
223 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
224
225 /* PCA957 @ 0x18 */
226 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
227 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
228 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
229 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
230 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
231 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
232 #define CONFIG_SYS_PCA953X_MONARCH              0x40
233 #define CONFIG_SYS_PCA953X_EREADY               0x80
234
235 /* PCA957 @ 0x19 */
236 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
237 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
238 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
239 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
240 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
241 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
242 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
243 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
244
245 /* 12-bit ADC used to measure CPU diode */
246 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
247
248 /*
249  * General PCI
250  * Memory space is mapped 1-1, but I/O space must start from 0.
251  */
252 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
253 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
254 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
255 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
256 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
257 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
258
259 /*
260  * Networking options
261  */
262 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
263 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
264 #define CONFIG_MII              1       /* MII PHY management */
265 #define CONFIG_ETHPRIME         "eTSEC1"
266
267 #define CONFIG_TSEC1            1
268 #define CONFIG_TSEC1_NAME       "eTSEC1"
269 #define TSEC1_FLAGS             TSEC_GIGABIT
270 #define TSEC1_PHY_ADDR          1
271 #define TSEC1_PHYIDX            0
272 #define CONFIG_HAS_ETH0
273
274 #define CONFIG_TSEC2            1
275 #define CONFIG_TSEC2_NAME       "eTSEC2"
276 #define TSEC2_FLAGS             TSEC_GIGABIT
277 #define TSEC2_PHY_ADDR          2
278 #define TSEC2_PHYIDX            0
279 #define CONFIG_HAS_ETH1
280
281 #define CONFIG_TSEC3    1
282 #define CONFIG_TSEC3_NAME       "eTSEC3"
283 #define TSEC3_FLAGS             TSEC_GIGABIT
284 #define TSEC3_PHY_ADDR          3
285 #define TSEC3_PHYIDX            0
286 #define CONFIG_HAS_ETH2
287
288 #define CONFIG_TSEC4    1
289 #define CONFIG_TSEC4_NAME       "eTSEC4"
290 #define TSEC4_FLAGS             TSEC_GIGABIT
291 #define TSEC4_PHY_ADDR          4
292 #define TSEC4_PHYIDX            0
293 #define CONFIG_HAS_ETH3
294
295 /*
296  * BOOTP options
297  */
298 #define CONFIG_BOOTP_BOOTFILESIZE
299 #define CONFIG_BOOTP_BOOTPATH
300 #define CONFIG_BOOTP_GATEWAY
301
302 /*
303  * Command configuration.
304  */
305 #define CONFIG_CMD_ASKENV
306 #define CONFIG_CMD_DATE
307 #define CONFIG_CMD_DHCP
308 #define CONFIG_CMD_EEPROM
309 #define CONFIG_CMD_I2C
310 #define CONFIG_CMD_JFFS2
311 #define CONFIG_CMD_MII
312 #define CONFIG_CMD_NAND
313 #define CONFIG_CMD_PCA953X
314 #define CONFIG_CMD_PCA953X_INFO
315 #define CONFIG_CMD_PCI
316 #define CONFIG_CMD_PCI_ENUM
317 #define CONFIG_CMD_PING
318 #define CONFIG_CMD_SNTP
319 #define CONFIG_CMD_REGINFO
320
321 /*
322  * Miscellaneous configurable options
323  */
324 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
325 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
326 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
327 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
328 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
329 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
330 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
331 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
332 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
333 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
334 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
335 #define CONFIG_PREBOOT                          /* enable preboot variable */
336 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
337 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
338
339 /*
340  * For booting Linux, the board info and command line data
341  * have to be in the first 16 MB of memory, since this is
342  * the maximum mapped by the Linux kernel during initialization.
343  */
344 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
345 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
346
347 /*
348  * Environment Configuration
349  */
350 #define CONFIG_ENV_IS_IN_FLASH  1
351 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
352 #define CONFIG_ENV_SIZE         0x8000
353 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
354
355 /*
356  * Flash memory map:
357  * fff80000 - ffffffff     Pri U-Boot (512 KB)
358  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
359  * fff00000 - fff3ffff     Pri FDT (256KB)
360  * fef00000 - ffefffff     Pri OS image (16MB)
361  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
362  *
363  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
364  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
365  * fbf00000 - fbf3ffff     Sec FDT (256KB)
366  * faf00000 - fbefffff     Sec OS image (16MB)
367  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
368  */
369 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
370 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
371 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
372 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
373 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
374 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
375
376 #define CONFIG_PROG_UBOOT1                                              \
377         "$download_cmd $loadaddr $ubootfile; "                          \
378         "if test $? -eq 0; then "                                       \
379                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
380                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
381                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
382                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
383                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
384                 "if test $? -ne 0; then "                               \
385                         "echo PROGRAM FAILED; "                         \
386                 "else; "                                                \
387                         "echo PROGRAM SUCCEEDED; "                      \
388                 "fi; "                                                  \
389         "else; "                                                        \
390                 "echo DOWNLOAD FAILED; "                                \
391         "fi;"
392
393 #define CONFIG_PROG_UBOOT2                                              \
394         "$download_cmd $loadaddr $ubootfile; "                          \
395         "if test $? -eq 0; then "                                       \
396                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
397                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
398                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
399                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
400                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
401                 "if test $? -ne 0; then "                               \
402                         "echo PROGRAM FAILED; "                         \
403                 "else; "                                                \
404                         "echo PROGRAM SUCCEEDED; "                      \
405                 "fi; "                                                  \
406         "else; "                                                        \
407                 "echo DOWNLOAD FAILED; "                                \
408         "fi;"
409
410 #define CONFIG_BOOT_OS_NET                                              \
411         "$download_cmd $osaddr $osfile; "                               \
412         "if test $? -eq 0; then "                                       \
413                 "if test -n $fdtaddr; then "                            \
414                         "$download_cmd $fdtaddr $fdtfile; "             \
415                         "if test $? -eq 0; then "                       \
416                                 "bootm $osaddr - $fdtaddr; "            \
417                         "else; "                                        \
418                                 "echo FDT DOWNLOAD FAILED; "            \
419                         "fi; "                                          \
420                 "else; "                                                \
421                         "bootm $osaddr; "                               \
422                 "fi; "                                                  \
423         "else; "                                                        \
424                 "echo OS DOWNLOAD FAILED; "                             \
425         "fi;"
426
427 #define CONFIG_PROG_OS1                                                 \
428         "$download_cmd $osaddr $osfile; "                               \
429         "if test $? -eq 0; then "                                       \
430                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
431                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
432                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
433                 "if test $? -ne 0; then "                               \
434                         "echo OS PROGRAM FAILED; "                      \
435                 "else; "                                                \
436                         "echo OS PROGRAM SUCCEEDED; "                   \
437                 "fi; "                                                  \
438         "else; "                                                        \
439                 "echo OS DOWNLOAD FAILED; "                             \
440         "fi;"
441
442 #define CONFIG_PROG_OS2                                                 \
443         "$download_cmd $osaddr $osfile; "                               \
444         "if test $? -eq 0; then "                                       \
445                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
446                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
447                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
448                 "if test $? -ne 0; then "                               \
449                         "echo OS PROGRAM FAILED; "                      \
450                 "else; "                                                \
451                         "echo OS PROGRAM SUCCEEDED; "                   \
452                 "fi; "                                                  \
453         "else; "                                                        \
454                 "echo OS DOWNLOAD FAILED; "                             \
455         "fi;"
456
457 #define CONFIG_PROG_FDT1                                                \
458         "$download_cmd $fdtaddr $fdtfile; "                             \
459         "if test $? -eq 0; then "                                       \
460                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
461                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
462                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
463                 "if test $? -ne 0; then "                               \
464                         "echo FDT PROGRAM FAILED; "                     \
465                 "else; "                                                \
466                         "echo FDT PROGRAM SUCCEEDED; "                  \
467                 "fi; "                                                  \
468         "else; "                                                        \
469                 "echo FDT DOWNLOAD FAILED; "                            \
470         "fi;"
471
472 #define CONFIG_PROG_FDT2                                                \
473         "$download_cmd $fdtaddr $fdtfile; "                             \
474         "if test $? -eq 0; then "                                       \
475                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
476                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
477                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
478                 "if test $? -ne 0; then "                               \
479                         "echo FDT PROGRAM FAILED; "                     \
480                 "else; "                                                \
481                         "echo FDT PROGRAM SUCCEEDED; "                  \
482                 "fi; "                                                  \
483         "else; "                                                        \
484                 "echo FDT DOWNLOAD FAILED; "                            \
485         "fi;"
486
487 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
488         "autoload=yes\0"                                                \
489         "download_cmd=tftp\0"                                           \
490         "console_args=console=ttyS0,115200\0"                           \
491         "root_args=root=/dev/nfs rw\0"                                  \
492         "misc_args=ip=on\0"                                             \
493         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
494         "bootfile=/home/user/file\0"                                    \
495         "osfile=/home/user/board.uImage\0"                              \
496         "fdtfile=/home/user/board.dtb\0"                                \
497         "ubootfile=/home/user/u-boot.bin\0"                             \
498         "fdtaddr=c00000\0"                                              \
499         "osaddr=0x1000000\0"                                            \
500         "loadaddr=0x1000000\0"                                          \
501         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
502         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
503         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
504         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
505         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
506         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
507         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
508         "bootcmd_flash1=run set_bootargs; "                             \
509                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
510         "bootcmd_flash2=run set_bootargs; "                             \
511                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
512         "bootcmd=run bootcmd_flash1\0"
513 #endif  /* __CONFIG_H */