configs: Migrate CONFIG_SYS_TEXT_BASE
[platform/kernel/u-boot.git] / include / configs / xpedite520x.h
1 /*
2  * Copyright 2008 Extreme Engineering Solutions, Inc.
3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * xpedite520x board configuration file
10  */
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 /*
15  * High Level Configuration Options
16  */
17 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
18 #define CONFIG_SYS_FORM_PMC_XMC 1
19 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
20
21 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
22 #define CONFIG_PCI1             1       /* PCI controller 1 */
23 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
24 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
25 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
26
27 /*
28  * DDR config
29  */
30 #undef CONFIG_FSL_DDR_INTERACTIVE
31 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
32 #define CONFIG_DDR_SPD
33 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
34 #define SPD_EEPROM_ADDRESS              0x54
35 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
36 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
37 #define CONFIG_DDR_ECC
38 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
39 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
40 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
41 #define CONFIG_VERY_BIG_RAM
42
43 #define CONFIG_SYS_CLK_FREQ     66666666
44
45 /*
46  * These can be toggled for performance analysis, otherwise use default.
47  */
48 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
49 #define CONFIG_BTB                      /* toggle branch predition */
50 #define CONFIG_ENABLE_36BIT_PHYS        1
51
52 #define CONFIG_SYS_CCSRBAR              0xef000000
53 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
54
55 /*
56  * Diagnostics
57  */
58 #define CONFIG_SYS_ALT_MEMTEST
59 #define CONFIG_SYS_MEMTEST_START        0x10000000
60 #define CONFIG_SYS_MEMTEST_END          0x20000000
61 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
62                                          CONFIG_SYS_POST_I2C)
63 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
64                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
65                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
66                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
67                                          CONFIG_SYS_I2C_RTC_ADDR}
68
69 /*
70  * Memory map
71  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
72  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
73  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
74  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
75  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
76  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
77  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
78  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
79  */
80
81 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
82
83 /*
84  * NAND flash configuration
85  */
86 #define CONFIG_SYS_NAND_BASE            0xef800000
87 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
88 #define CONFIG_SYS_MAX_NAND_DEVICE      1
89 #define CONFIG_NAND_ACTL
90 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
91 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
92 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
93 #define CONFIG_SYS_NAND_ACTL_DELAY      25
94
95 /*
96  * NOR flash configuration
97  */
98 #define CONFIG_SYS_FLASH_BASE           0xfc000000
99 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
100 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
101 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
102 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
103 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
104 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
105 #define CONFIG_FLASH_CFI_DRIVER
106 #define CONFIG_SYS_FLASH_CFI
107 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
108 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
109                                                   {0xfbf40000, 0xc0000} }
110 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
111
112 /*
113  * Chip select configuration
114  */
115 /* NOR Flash 0 on CS0 */
116 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
117                                  BR_PS_16               | \
118                                  BR_V)
119 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
120                                  OR_GPCM_ACS_DIV4       | \
121                                  OR_GPCM_SCY_8)
122
123 /* NOR Flash 1 on CS1 */
124 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
125                                  BR_PS_16               | \
126                                  BR_V)
127 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
128
129 /* NAND flash on CS2 */
130 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
131                                  BR_PS_8                | \
132                                  BR_V)
133
134 /* NAND flash on CS2 */
135 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
136                                  OR_GPCM_BCTLD          | \
137                                  OR_GPCM_CSNT           | \
138                                  OR_GPCM_ACS_DIV4       | \
139                                  OR_GPCM_SCY_4          | \
140                                  OR_GPCM_TRLX           | \
141                                  OR_GPCM_EHTR)
142
143 /* NAND flash on CS3 */
144 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
145                                  BR_PS_8                | \
146                                  BR_V)
147 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
148
149 /*
150  * Use L1 as initial stack
151  */
152 #define CONFIG_SYS_INIT_RAM_LOCK        1
153 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
154 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
155
156 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
157 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
158
159 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
160 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
161
162 /*
163  * Serial Port
164  */
165 #define CONFIG_CONS_INDEX               1
166 #define CONFIG_SYS_NS16550_SERIAL
167 #define CONFIG_SYS_NS16550_REG_SIZE     1
168 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
169 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
170 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
171 #define CONFIG_SYS_BAUDRATE_TABLE       \
172         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
173 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
174 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
175
176 /*
177  * I2C
178  */
179 #define CONFIG_SYS_I2C
180 #define CONFIG_SYS_I2C_FSL
181 #define CONFIG_SYS_FSL_I2C_SPEED        400000
182 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
183 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
184 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
185 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
186 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
187
188 /* I2C EEPROM */
189 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
190 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
191 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
192 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
193
194 /* I2C RTC */
195 #define CONFIG_RTC_M41T11                       1
196 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
197 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
198
199 /* GPIO */
200 #define CONFIG_PCA953X
201 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
202 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
203 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
204
205 /* PCA957 @ 0x18 */
206 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
207 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
208 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
209 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
210 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
211 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
212 #define CONFIG_SYS_PCA953X_MONARCH              0x40
213 #define CONFIG_SYS_PCA953X_EREADY               0x80
214
215 /* PCA957 @ 0x19 */
216 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
217 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
218 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
219 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
220 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
221 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
222 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
223 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
224
225 /* 12-bit ADC used to measure CPU diode */
226 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
227
228 /*
229  * General PCI
230  * Memory space is mapped 1-1, but I/O space must start from 0.
231  */
232 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
233 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
234 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
235 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
236 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
237 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
238
239 /*
240  * Networking options
241  */
242 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
243 #define CONFIG_MII              1       /* MII PHY management */
244 #define CONFIG_ETHPRIME         "eTSEC1"
245
246 #define CONFIG_TSEC1            1
247 #define CONFIG_TSEC1_NAME       "eTSEC1"
248 #define TSEC1_FLAGS             TSEC_GIGABIT
249 #define TSEC1_PHY_ADDR          1
250 #define TSEC1_PHYIDX            0
251 #define CONFIG_HAS_ETH0
252
253 #define CONFIG_TSEC2            1
254 #define CONFIG_TSEC2_NAME       "eTSEC2"
255 #define TSEC2_FLAGS             TSEC_GIGABIT
256 #define TSEC2_PHY_ADDR          2
257 #define TSEC2_PHYIDX            0
258 #define CONFIG_HAS_ETH1
259
260 #define CONFIG_TSEC3    1
261 #define CONFIG_TSEC3_NAME       "eTSEC3"
262 #define TSEC3_FLAGS             TSEC_GIGABIT
263 #define TSEC3_PHY_ADDR          3
264 #define TSEC3_PHYIDX            0
265 #define CONFIG_HAS_ETH2
266
267 #define CONFIG_TSEC4    1
268 #define CONFIG_TSEC4_NAME       "eTSEC4"
269 #define TSEC4_FLAGS             TSEC_GIGABIT
270 #define TSEC4_PHY_ADDR          4
271 #define TSEC4_PHYIDX            0
272 #define CONFIG_HAS_ETH3
273
274 /*
275  * BOOTP options
276  */
277 #define CONFIG_BOOTP_BOOTFILESIZE
278 #define CONFIG_BOOTP_BOOTPATH
279 #define CONFIG_BOOTP_GATEWAY
280
281 /*
282  * Miscellaneous configurable options
283  */
284 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
285 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
286 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
287 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
288 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
289 #define CONFIG_PREBOOT                          /* enable preboot variable */
290 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
291 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
292
293 /*
294  * For booting Linux, the board info and command line data
295  * have to be in the first 16 MB of memory, since this is
296  * the maximum mapped by the Linux kernel during initialization.
297  */
298 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
299 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
300
301 /*
302  * Environment Configuration
303  */
304 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
305 #define CONFIG_ENV_SIZE         0x8000
306 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
307
308 /*
309  * Flash memory map:
310  * fff80000 - ffffffff     Pri U-Boot (512 KB)
311  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
312  * fff00000 - fff3ffff     Pri FDT (256KB)
313  * fef00000 - ffefffff     Pri OS image (16MB)
314  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
315  *
316  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
317  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
318  * fbf00000 - fbf3ffff     Sec FDT (256KB)
319  * faf00000 - fbefffff     Sec OS image (16MB)
320  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
321  */
322 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
323 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
324 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
325 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
326 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
327 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
328
329 #define CONFIG_PROG_UBOOT1                                              \
330         "$download_cmd $loadaddr $ubootfile; "                          \
331         "if test $? -eq 0; then "                                       \
332                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
333                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
334                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
335                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
336                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
337                 "if test $? -ne 0; then "                               \
338                         "echo PROGRAM FAILED; "                         \
339                 "else; "                                                \
340                         "echo PROGRAM SUCCEEDED; "                      \
341                 "fi; "                                                  \
342         "else; "                                                        \
343                 "echo DOWNLOAD FAILED; "                                \
344         "fi;"
345
346 #define CONFIG_PROG_UBOOT2                                              \
347         "$download_cmd $loadaddr $ubootfile; "                          \
348         "if test $? -eq 0; then "                                       \
349                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
350                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
351                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
352                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
353                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
354                 "if test $? -ne 0; then "                               \
355                         "echo PROGRAM FAILED; "                         \
356                 "else; "                                                \
357                         "echo PROGRAM SUCCEEDED; "                      \
358                 "fi; "                                                  \
359         "else; "                                                        \
360                 "echo DOWNLOAD FAILED; "                                \
361         "fi;"
362
363 #define CONFIG_BOOT_OS_NET                                              \
364         "$download_cmd $osaddr $osfile; "                               \
365         "if test $? -eq 0; then "                                       \
366                 "if test -n $fdtaddr; then "                            \
367                         "$download_cmd $fdtaddr $fdtfile; "             \
368                         "if test $? -eq 0; then "                       \
369                                 "bootm $osaddr - $fdtaddr; "            \
370                         "else; "                                        \
371                                 "echo FDT DOWNLOAD FAILED; "            \
372                         "fi; "                                          \
373                 "else; "                                                \
374                         "bootm $osaddr; "                               \
375                 "fi; "                                                  \
376         "else; "                                                        \
377                 "echo OS DOWNLOAD FAILED; "                             \
378         "fi;"
379
380 #define CONFIG_PROG_OS1                                                 \
381         "$download_cmd $osaddr $osfile; "                               \
382         "if test $? -eq 0; then "                                       \
383                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
384                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
385                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
386                 "if test $? -ne 0; then "                               \
387                         "echo OS PROGRAM FAILED; "                      \
388                 "else; "                                                \
389                         "echo OS PROGRAM SUCCEEDED; "                   \
390                 "fi; "                                                  \
391         "else; "                                                        \
392                 "echo OS DOWNLOAD FAILED; "                             \
393         "fi;"
394
395 #define CONFIG_PROG_OS2                                                 \
396         "$download_cmd $osaddr $osfile; "                               \
397         "if test $? -eq 0; then "                                       \
398                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
399                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
400                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
401                 "if test $? -ne 0; then "                               \
402                         "echo OS PROGRAM FAILED; "                      \
403                 "else; "                                                \
404                         "echo OS PROGRAM SUCCEEDED; "                   \
405                 "fi; "                                                  \
406         "else; "                                                        \
407                 "echo OS DOWNLOAD FAILED; "                             \
408         "fi;"
409
410 #define CONFIG_PROG_FDT1                                                \
411         "$download_cmd $fdtaddr $fdtfile; "                             \
412         "if test $? -eq 0; then "                                       \
413                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
414                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
415                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
416                 "if test $? -ne 0; then "                               \
417                         "echo FDT PROGRAM FAILED; "                     \
418                 "else; "                                                \
419                         "echo FDT PROGRAM SUCCEEDED; "                  \
420                 "fi; "                                                  \
421         "else; "                                                        \
422                 "echo FDT DOWNLOAD FAILED; "                            \
423         "fi;"
424
425 #define CONFIG_PROG_FDT2                                                \
426         "$download_cmd $fdtaddr $fdtfile; "                             \
427         "if test $? -eq 0; then "                                       \
428                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
429                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
430                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
431                 "if test $? -ne 0; then "                               \
432                         "echo FDT PROGRAM FAILED; "                     \
433                 "else; "                                                \
434                         "echo FDT PROGRAM SUCCEEDED; "                  \
435                 "fi; "                                                  \
436         "else; "                                                        \
437                 "echo FDT DOWNLOAD FAILED; "                            \
438         "fi;"
439
440 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
441         "autoload=yes\0"                                                \
442         "download_cmd=tftp\0"                                           \
443         "console_args=console=ttyS0,115200\0"                           \
444         "root_args=root=/dev/nfs rw\0"                                  \
445         "misc_args=ip=on\0"                                             \
446         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
447         "bootfile=/home/user/file\0"                                    \
448         "osfile=/home/user/board.uImage\0"                              \
449         "fdtfile=/home/user/board.dtb\0"                                \
450         "ubootfile=/home/user/u-boot.bin\0"                             \
451         "fdtaddr=0x1e00000\0"                                           \
452         "osaddr=0x1000000\0"                                            \
453         "loadaddr=0x1000000\0"                                          \
454         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
455         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
456         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
457         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
458         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
459         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
460         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
461         "bootcmd_flash1=run set_bootargs; "                             \
462                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
463         "bootcmd_flash2=run set_bootargs; "                             \
464                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
465         "bootcmd=run bootcmd_flash1\0"
466 #endif  /* __CONFIG_H */