include/configs/xpedite520x.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2008 Extreme Engineering Solutions, Inc.
   4  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   5  */
   6
   7 /*
   8  * xpedite520x board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  17 #define CONFIG_SYS_FORM_PMC_XMC 1
  18
  19 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  20 #define CONFIG_PCI1             1       /* PCI controller 1 */
  21 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  22 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  23 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  24
  25 /*
  26  * DDR config
  27  */
  28 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  29 #define CONFIG_DDR_SPD
  30 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  31 #define SPD_EEPROM_ADDRESS              0x54
  32 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  33 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  34 #define CONFIG_DDR_ECC
  35 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  36 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  37 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  38 #define CONFIG_VERY_BIG_RAM
  39
  40 #define CONFIG_SYS_CLK_FREQ     66666666
  41
  42 /*
  43  * These can be toggled for performance analysis, otherwise use default.
  44  */
  45 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  46 #define CONFIG_BTB                      /* toggle branch predition */
  47 #define CONFIG_ENABLE_36BIT_PHYS        1
  48
  49 #define CONFIG_SYS_CCSRBAR              0xef000000
  50 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  51
  52 /*
  53  * Diagnostics
  54  */
  55 #define CONFIG_SYS_MEMTEST_START        0x10000000
  56 #define CONFIG_SYS_MEMTEST_END          0x20000000
  57 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
  58                                          CONFIG_SYS_POST_I2C)
  59 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
  60                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
  61                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
  62                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
  63                                          CONFIG_SYS_I2C_RTC_ADDR}
  64
  65 /*
  66  * Memory map
  67  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  68  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  69  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  70  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  71  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  72  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  73  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
  74  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
  75  */
  76
  77 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
  78
  79 /*
  80  * NAND flash configuration
  81  */
  82 #define CONFIG_SYS_NAND_BASE            0xef800000
  83 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
  84 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  85 #define CONFIG_NAND_ACTL
  86 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
  87 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
  88 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
  89 #define CONFIG_SYS_NAND_ACTL_DELAY      25
  90
  91 /*
  92  * NOR flash configuration
  93  */
  94 #define CONFIG_SYS_FLASH_BASE           0xfc000000
  95 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
  96 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
  97 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
  98 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
  99 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 100 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 101 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 102                                                   {0xfbf40000, 0xc0000} }
 103 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 104
 105 /*
 106  * Chip select configuration
 107  */
 108 /* NOR Flash 0 on CS0 */
 109 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 110                                  BR_PS_16               | \
 111                                  BR_V)
 112 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 113                                  OR_GPCM_ACS_DIV4       | \
 114                                  OR_GPCM_SCY_8)
 115
 116 /* NOR Flash 1 on CS1 */
 117 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 118                                  BR_PS_16               | \
 119                                  BR_V)
 120 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 121
 122 /* NAND flash on CS2 */
 123 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 124                                  BR_PS_8                | \
 125                                  BR_V)
 126
 127 /* NAND flash on CS2 */
 128 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 129                                  OR_GPCM_BCTLD          | \
 130                                  OR_GPCM_CSNT           | \
 131                                  OR_GPCM_ACS_DIV4       | \
 132                                  OR_GPCM_SCY_4          | \
 133                                  OR_GPCM_TRLX           | \
 134                                  OR_GPCM_EHTR)
 135
 136 /* NAND flash on CS3 */
 137 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 138                                  BR_PS_8                | \
 139                                  BR_V)
 140 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 141
 142 /*
 143  * Use L1 as initial stack
 144  */
 145 #define CONFIG_SYS_INIT_RAM_LOCK        1
 146 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 147 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
 148
 149 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 150 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 151
 152 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 153 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 154
 155 /*
 156  * Serial Port
 157  */
 158 #define CONFIG_SYS_NS16550_SERIAL
 159 #define CONFIG_SYS_NS16550_REG_SIZE     1
 160 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 161 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 162 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 163 #define CONFIG_SYS_BAUDRATE_TABLE       \
 164         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 165 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 166 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 167
 168 /*
 169  * I2C
 170  */
 171 #define CONFIG_SYS_I2C
 172 #define CONFIG_SYS_I2C_FSL
 173 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 174 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 175 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 176 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 177 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 178 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 179
 180 /* I2C EEPROM */
 181 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 182 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 183 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 184 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 185
 186 /* I2C RTC */
 187 #define CONFIG_RTC_M41T11                       1
 188 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 189 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 190
 191 /* GPIO */
 192 #define CONFIG_PCA953X
 193 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 194 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 195 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 196
 197 /* PCA957 @ 0x18 */
 198 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 199 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 200 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 201 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 202 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 203 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
 204 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 205 #define CONFIG_SYS_PCA953X_EREADY               0x80
 206
 207 /* PCA957 @ 0x19 */
 208 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 209 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 210 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 211 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 212 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 213 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 214 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 215 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 216
 217 /* 12-bit ADC used to measure CPU diode */
 218 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
 219
 220 /*
 221  * General PCI
 222  * Memory space is mapped 1-1, but I/O space must start from 0.
 223  */
 224 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 225 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 226 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 227 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 228 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 229 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 230
 231 /*
 232  * Networking options
 233  */
 234 #define CONFIG_ETHPRIME         "eTSEC1"
 235
 236 #define CONFIG_TSEC1            1
 237 #define CONFIG_TSEC1_NAME       "eTSEC1"
 238 #define TSEC1_FLAGS             TSEC_GIGABIT
 239 #define TSEC1_PHY_ADDR          1
 240 #define TSEC1_PHYIDX            0
 241 #define CONFIG_HAS_ETH0
 242
 243 #define CONFIG_TSEC2            1
 244 #define CONFIG_TSEC2_NAME       "eTSEC2"
 245 #define TSEC2_FLAGS             TSEC_GIGABIT
 246 #define TSEC2_PHY_ADDR          2
 247 #define TSEC2_PHYIDX            0
 248 #define CONFIG_HAS_ETH1
 249
 250 #define CONFIG_TSEC3    1
 251 #define CONFIG_TSEC3_NAME       "eTSEC3"
 252 #define TSEC3_FLAGS             TSEC_GIGABIT
 253 #define TSEC3_PHY_ADDR          3
 254 #define TSEC3_PHYIDX            0
 255 #define CONFIG_HAS_ETH2
 256
 257 #define CONFIG_TSEC4    1
 258 #define CONFIG_TSEC4_NAME       "eTSEC4"
 259 #define TSEC4_FLAGS             TSEC_GIGABIT
 260 #define TSEC4_PHY_ADDR          4
 261 #define TSEC4_PHYIDX            0
 262 #define CONFIG_HAS_ETH3
 263
 264 /*
 265  * BOOTP options
 266  */
 267 #define CONFIG_BOOTP_BOOTFILESIZE
 268
 269 /*
 270  * Miscellaneous configurable options
 271  */
 272 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 273 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 274 #define CONFIG_PREBOOT                          /* enable preboot variable */
 275 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 276 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 277
 278 /*
 279  * For booting Linux, the board info and command line data
 280  * have to be in the first 16 MB of memory, since this is
 281  * the maximum mapped by the Linux kernel during initialization.
 282  */
 283 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 284 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 285
 286 /*
 287  * Environment Configuration
 288  */
 289 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 290 #define CONFIG_ENV_SIZE         0x8000
 291 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 292
 293 /*
 294  * Flash memory map:
 295  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 296  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 297  * fff00000 - fff3ffff     Pri FDT (256KB)
 298  * fef00000 - ffefffff     Pri OS image (16MB)
 299  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 300  *
 301  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 302  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 303  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 304  * faf00000 - fbefffff     Sec OS image (16MB)
 305  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 306  */
 307 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
 308 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
 309 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
 310 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
 311 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 312 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
 313
 314 #define CONFIG_PROG_UBOOT1                                              \
 315         "$download_cmd $loadaddr $ubootfile; "                          \
 316         "if test $? -eq 0; then "                                       \
 317                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 318                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 319                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 320                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 321                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 322                 "if test $? -ne 0; then "                               \
 323                         "echo PROGRAM FAILED; "                         \
 324                 "else; "                                                \
 325                         "echo PROGRAM SUCCEEDED; "                      \
 326                 "fi; "                                                  \
 327         "else; "                                                        \
 328                 "echo DOWNLOAD FAILED; "                                \
 329         "fi;"
 330
 331 #define CONFIG_PROG_UBOOT2                                              \
 332         "$download_cmd $loadaddr $ubootfile; "                          \
 333         "if test $? -eq 0; then "                                       \
 334                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 335                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 336                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 337                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 338                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 339                 "if test $? -ne 0; then "                               \
 340                         "echo PROGRAM FAILED; "                         \
 341                 "else; "                                                \
 342                         "echo PROGRAM SUCCEEDED; "                      \
 343                 "fi; "                                                  \
 344         "else; "                                                        \
 345                 "echo DOWNLOAD FAILED; "                                \
 346         "fi;"
 347
 348 #define CONFIG_BOOT_OS_NET                                              \
 349         "$download_cmd $osaddr $osfile; "                               \
 350         "if test $? -eq 0; then "                                       \
 351                 "if test -n $fdtaddr; then "                            \
 352                         "$download_cmd $fdtaddr $fdtfile; "             \
 353                         "if test $? -eq 0; then "                       \
 354                                 "bootm $osaddr - $fdtaddr; "            \
 355                         "else; "                                        \
 356                                 "echo FDT DOWNLOAD FAILED; "            \
 357                         "fi; "                                          \
 358                 "else; "                                                \
 359                         "bootm $osaddr; "                               \
 360                 "fi; "                                                  \
 361         "else; "                                                        \
 362                 "echo OS DOWNLOAD FAILED; "                             \
 363         "fi;"
 364
 365 #define CONFIG_PROG_OS1                                                 \
 366         "$download_cmd $osaddr $osfile; "                               \
 367         "if test $? -eq 0; then "                                       \
 368                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 369                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 370                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 371                 "if test $? -ne 0; then "                               \
 372                         "echo OS PROGRAM FAILED; "                      \
 373                 "else; "                                                \
 374                         "echo OS PROGRAM SUCCEEDED; "                   \
 375                 "fi; "                                                  \
 376         "else; "                                                        \
 377                 "echo OS DOWNLOAD FAILED; "                             \
 378         "fi;"
 379
 380 #define CONFIG_PROG_OS2                                                 \
 381         "$download_cmd $osaddr $osfile; "                               \
 382         "if test $? -eq 0; then "                                       \
 383                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 384                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 385                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 386                 "if test $? -ne 0; then "                               \
 387                         "echo OS PROGRAM FAILED; "                      \
 388                 "else; "                                                \
 389                         "echo OS PROGRAM SUCCEEDED; "                   \
 390                 "fi; "                                                  \
 391         "else; "                                                        \
 392                 "echo OS DOWNLOAD FAILED; "                             \
 393         "fi;"
 394
 395 #define CONFIG_PROG_FDT1                                                \
 396         "$download_cmd $fdtaddr $fdtfile; "                             \
 397         "if test $? -eq 0; then "                                       \
 398                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 399                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 400                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 401                 "if test $? -ne 0; then "                               \
 402                         "echo FDT PROGRAM FAILED; "                     \
 403                 "else; "                                                \
 404                         "echo FDT PROGRAM SUCCEEDED; "                  \
 405                 "fi; "                                                  \
 406         "else; "                                                        \
 407                 "echo FDT DOWNLOAD FAILED; "                            \
 408         "fi;"
 409
 410 #define CONFIG_PROG_FDT2                                                \
 411         "$download_cmd $fdtaddr $fdtfile; "                             \
 412         "if test $? -eq 0; then "                                       \
 413                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 414                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 415                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 416                 "if test $? -ne 0; then "                               \
 417                         "echo FDT PROGRAM FAILED; "                     \
 418                 "else; "                                                \
 419                         "echo FDT PROGRAM SUCCEEDED; "                  \
 420                 "fi; "                                                  \
 421         "else; "                                                        \
 422                 "echo FDT DOWNLOAD FAILED; "                            \
 423         "fi;"
 424
 425 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 426         "autoload=yes\0"                                                \
 427         "download_cmd=tftp\0"                                           \
 428         "console_args=console=ttyS0,115200\0"                           \
 429         "root_args=root=/dev/nfs rw\0"                                  \
 430         "misc_args=ip=on\0"                                             \
 431         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 432         "bootfile=/home/user/file\0"                                    \
 433         "osfile=/home/user/board.uImage\0"                              \
 434         "fdtfile=/home/user/board.dtb\0"                                \
 435         "ubootfile=/home/user/u-boot.bin\0"                             \
 436         "fdtaddr=0x1e00000\0"                                           \
 437         "osaddr=0x1000000\0"                                            \
 438         "loadaddr=0x1000000\0"                                          \
 439         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 440         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 441         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 442         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 443         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 444         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 445         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 446         "bootcmd_flash1=run set_bootargs; "                             \
 447                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 448         "bootcmd_flash2=run set_bootargs; "                             \
 449                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 450         "bootcmd=run bootcmd_flash1\0"
 451 #endif  /* __CONFIG_H */