include/configs/xpedite520x.h

   1 /*
   2  * Copyright 2008 Extreme Engineering Solutions, Inc.
   3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * xpedite520x board configuration file
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17 #define CONFIG_BOOKE            1       /* BOOKE */
  18 #define CONFIG_E500             1       /* BOOKE e500 family */
  19 #define CONFIG_MPC8548          1
  20 #define CONFIG_XPEDITE5200      1
  21 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  22 #define CONFIG_SYS_FORM_PMC_XMC 1
  23 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  24
  25 #ifndef CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  27 #endif
  28
  29 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  30 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
  31 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  32 #define CONFIG_PCI1             1       /* PCI controller 1 */
  33 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  34 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  35 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  36 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  37
  38 /*
  39  * DDR config
  40  */
  41 #define CONFIG_SYS_FSL_DDR2
  42 #undef CONFIG_FSL_DDR_INTERACTIVE
  43 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  44 #define CONFIG_DDR_SPD
  45 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  46 #define SPD_EEPROM_ADDRESS              0x54
  47 #define CONFIG_NUM_DDR_CONTROLLERS      1
  48 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  49 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  50 #define CONFIG_DDR_ECC
  51 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  52 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  53 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  54 #define CONFIG_VERY_BIG_RAM
  55
  56 #define CONFIG_SYS_CLK_FREQ     66666666
  57
  58 /*
  59  * These can be toggled for performance analysis, otherwise use default.
  60  */
  61 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  62 #define CONFIG_BTB                      /* toggle branch predition */
  63 #define CONFIG_ENABLE_36BIT_PHYS        1
  64
  65 #define CONFIG_SYS_CCSRBAR              0xef000000
  66 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  67
  68 /*
  69  * Diagnostics
  70  */
  71 #define CONFIG_SYS_ALT_MEMTEST
  72 #define CONFIG_SYS_MEMTEST_START        0x10000000
  73 #define CONFIG_SYS_MEMTEST_END          0x20000000
  74 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
  75                                          CONFIG_SYS_POST_I2C)
  76 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
  77                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
  78                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
  79                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
  80                                          CONFIG_SYS_I2C_RTC_ADDR}
  81
  82 /*
  83  * Memory map
  84  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  85  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  86  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  87  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  88  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  89  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  90  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
  91  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
  92  */
  93
  94 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
  95
  96 /*
  97  * NAND flash configuration
  98  */
  99 #define CONFIG_SYS_NAND_BASE            0xef800000
 100 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
 101 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 102 #define CONFIG_NAND_ACTL
 103 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
 104 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
 105 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
 106 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 107
 108 /*
 109  * NOR flash configuration
 110  */
 111 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 112 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
 113 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 114 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 115 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 116 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 117 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 118 #define CONFIG_FLASH_CFI_DRIVER
 119 #define CONFIG_SYS_FLASH_CFI
 120 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 121 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 122                                                   {0xfbf40000, 0xc0000} }
 123 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 124
 125 /*
 126  * Chip select configuration
 127  */
 128 /* NOR Flash 0 on CS0 */
 129 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 130                                  BR_PS_16               | \
 131                                  BR_V)
 132 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 133                                  OR_GPCM_ACS_DIV4       | \
 134                                  OR_GPCM_SCY_8)
 135
 136 /* NOR Flash 1 on CS1 */
 137 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 138                                  BR_PS_16               | \
 139                                  BR_V)
 140 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 141
 142 /* NAND flash on CS2 */
 143 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 144                                  BR_PS_8                | \
 145                                  BR_V)
 146
 147 /* NAND flash on CS2 */
 148 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 149                                  OR_GPCM_BCTLD          | \
 150                                  OR_GPCM_CSNT           | \
 151                                  OR_GPCM_ACS_DIV4       | \
 152                                  OR_GPCM_SCY_4          | \
 153                                  OR_GPCM_TRLX           | \
 154                                  OR_GPCM_EHTR)
 155
 156 /* NAND flash on CS3 */
 157 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 158                                  BR_PS_8                | \
 159                                  BR_V)
 160 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 161
 162 /*
 163  * Use L1 as initial stack
 164  */
 165 #define CONFIG_SYS_INIT_RAM_LOCK        1
 166 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 167 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
 168
 169 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 170 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 171
 172 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 173 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 174
 175 /*
 176  * Serial Port
 177  */
 178 #define CONFIG_CONS_INDEX               1
 179 #define CONFIG_SYS_NS16550_SERIAL
 180 #define CONFIG_SYS_NS16550_REG_SIZE     1
 181 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 182 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 183 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 184 #define CONFIG_SYS_BAUDRATE_TABLE       \
 185         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 186 #define CONFIG_BAUDRATE                 115200
 187 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 188 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 189
 190 /*
 191  * I2C
 192  */
 193 #define CONFIG_SYS_I2C
 194 #define CONFIG_SYS_I2C_FSL
 195 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 196 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 197 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 198 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 199 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 200 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 201
 202 /* I2C EEPROM */
 203 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 204 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 205 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 206 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 207
 208 /* I2C RTC */
 209 #define CONFIG_RTC_M41T11                       1
 210 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 211 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 212
 213 /* GPIO */
 214 #define CONFIG_PCA953X
 215 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 216 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 217 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 218
 219 /* PCA957 @ 0x18 */
 220 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 221 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 222 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 223 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 224 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 225 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
 226 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 227 #define CONFIG_SYS_PCA953X_EREADY               0x80
 228
 229 /* PCA957 @ 0x19 */
 230 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 231 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 232 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 233 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 234 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 235 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 236 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 237 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 238
 239 /* 12-bit ADC used to measure CPU diode */
 240 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
 241
 242 /*
 243  * General PCI
 244  * Memory space is mapped 1-1, but I/O space must start from 0.
 245  */
 246 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 247 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 248 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 249 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 250 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 251 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 252
 253 /*
 254  * Networking options
 255  */
 256 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 257 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 258 #define CONFIG_MII              1       /* MII PHY management */
 259 #define CONFIG_ETHPRIME         "eTSEC1"
 260
 261 #define CONFIG_TSEC1            1
 262 #define CONFIG_TSEC1_NAME       "eTSEC1"
 263 #define TSEC1_FLAGS             TSEC_GIGABIT
 264 #define TSEC1_PHY_ADDR          1
 265 #define TSEC1_PHYIDX            0
 266 #define CONFIG_HAS_ETH0
 267
 268 #define CONFIG_TSEC2            1
 269 #define CONFIG_TSEC2_NAME       "eTSEC2"
 270 #define TSEC2_FLAGS             TSEC_GIGABIT
 271 #define TSEC2_PHY_ADDR          2
 272 #define TSEC2_PHYIDX            0
 273 #define CONFIG_HAS_ETH1
 274
 275 #define CONFIG_TSEC3    1
 276 #define CONFIG_TSEC3_NAME       "eTSEC3"
 277 #define TSEC3_FLAGS             TSEC_GIGABIT
 278 #define TSEC3_PHY_ADDR          3
 279 #define TSEC3_PHYIDX            0
 280 #define CONFIG_HAS_ETH2
 281
 282 #define CONFIG_TSEC4    1
 283 #define CONFIG_TSEC4_NAME       "eTSEC4"
 284 #define TSEC4_FLAGS             TSEC_GIGABIT
 285 #define TSEC4_PHY_ADDR          4
 286 #define TSEC4_PHYIDX            0
 287 #define CONFIG_HAS_ETH3
 288
 289 /*
 290  * BOOTP options
 291  */
 292 #define CONFIG_BOOTP_BOOTFILESIZE
 293 #define CONFIG_BOOTP_BOOTPATH
 294 #define CONFIG_BOOTP_GATEWAY
 295
 296 /*
 297  * Command configuration.
 298  */
 299 #define CONFIG_CMD_DATE
 300 #define CONFIG_CMD_EEPROM
 301 #define CONFIG_CMD_JFFS2
 302 #define CONFIG_CMD_NAND
 303 #define CONFIG_CMD_PCA953X
 304 #define CONFIG_CMD_PCA953X_INFO
 305 #define CONFIG_CMD_PCI
 306 #define CONFIG_CMD_PCI_ENUM
 307 #define CONFIG_CMD_REGINFO
 308
 309 /*
 310  * Miscellaneous configurable options
 311  */
 312 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 313 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 314 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 315 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 316 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 317 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 318 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
 319 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
 320 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 321 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 322 #define CONFIG_PREBOOT                          /* enable preboot variable */
 323 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 324 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 325
 326 /*
 327  * For booting Linux, the board info and command line data
 328  * have to be in the first 16 MB of memory, since this is
 329  * the maximum mapped by the Linux kernel during initialization.
 330  */
 331 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 332 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 333
 334 /*
 335  * Environment Configuration
 336  */
 337 #define CONFIG_ENV_IS_IN_FLASH  1
 338 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 339 #define CONFIG_ENV_SIZE         0x8000
 340 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 341
 342 /*
 343  * Flash memory map:
 344  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 345  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 346  * fff00000 - fff3ffff     Pri FDT (256KB)
 347  * fef00000 - ffefffff     Pri OS image (16MB)
 348  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 349  *
 350  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 351  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 352  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 353  * faf00000 - fbefffff     Sec OS image (16MB)
 354  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 355  */
 356 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
 357 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
 358 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
 359 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
 360 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 361 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
 362
 363 #define CONFIG_PROG_UBOOT1                                              \
 364         "$download_cmd $loadaddr $ubootfile; "                          \
 365         "if test $? -eq 0; then "                                       \
 366                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 367                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 368                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 369                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 370                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 371                 "if test $? -ne 0; then "                               \
 372                         "echo PROGRAM FAILED; "                         \
 373                 "else; "                                                \
 374                         "echo PROGRAM SUCCEEDED; "                      \
 375                 "fi; "                                                  \
 376         "else; "                                                        \
 377                 "echo DOWNLOAD FAILED; "                                \
 378         "fi;"
 379
 380 #define CONFIG_PROG_UBOOT2                                              \
 381         "$download_cmd $loadaddr $ubootfile; "                          \
 382         "if test $? -eq 0; then "                                       \
 383                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 384                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 385                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 386                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 387                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 388                 "if test $? -ne 0; then "                               \
 389                         "echo PROGRAM FAILED; "                         \
 390                 "else; "                                                \
 391                         "echo PROGRAM SUCCEEDED; "                      \
 392                 "fi; "                                                  \
 393         "else; "                                                        \
 394                 "echo DOWNLOAD FAILED; "                                \
 395         "fi;"
 396
 397 #define CONFIG_BOOT_OS_NET                                              \
 398         "$download_cmd $osaddr $osfile; "                               \
 399         "if test $? -eq 0; then "                                       \
 400                 "if test -n $fdtaddr; then "                            \
 401                         "$download_cmd $fdtaddr $fdtfile; "             \
 402                         "if test $? -eq 0; then "                       \
 403                                 "bootm $osaddr - $fdtaddr; "            \
 404                         "else; "                                        \
 405                                 "echo FDT DOWNLOAD FAILED; "            \
 406                         "fi; "                                          \
 407                 "else; "                                                \
 408                         "bootm $osaddr; "                               \
 409                 "fi; "                                                  \
 410         "else; "                                                        \
 411                 "echo OS DOWNLOAD FAILED; "                             \
 412         "fi;"
 413
 414 #define CONFIG_PROG_OS1                                                 \
 415         "$download_cmd $osaddr $osfile; "                               \
 416         "if test $? -eq 0; then "                                       \
 417                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 418                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 419                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 420                 "if test $? -ne 0; then "                               \
 421                         "echo OS PROGRAM FAILED; "                      \
 422                 "else; "                                                \
 423                         "echo OS PROGRAM SUCCEEDED; "                   \
 424                 "fi; "                                                  \
 425         "else; "                                                        \
 426                 "echo OS DOWNLOAD FAILED; "                             \
 427         "fi;"
 428
 429 #define CONFIG_PROG_OS2                                                 \
 430         "$download_cmd $osaddr $osfile; "                               \
 431         "if test $? -eq 0; then "                                       \
 432                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 433                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 434                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 435                 "if test $? -ne 0; then "                               \
 436                         "echo OS PROGRAM FAILED; "                      \
 437                 "else; "                                                \
 438                         "echo OS PROGRAM SUCCEEDED; "                   \
 439                 "fi; "                                                  \
 440         "else; "                                                        \
 441                 "echo OS DOWNLOAD FAILED; "                             \
 442         "fi;"
 443
 444 #define CONFIG_PROG_FDT1                                                \
 445         "$download_cmd $fdtaddr $fdtfile; "                             \
 446         "if test $? -eq 0; then "                                       \
 447                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 448                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 449                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 450                 "if test $? -ne 0; then "                               \
 451                         "echo FDT PROGRAM FAILED; "                     \
 452                 "else; "                                                \
 453                         "echo FDT PROGRAM SUCCEEDED; "                  \
 454                 "fi; "                                                  \
 455         "else; "                                                        \
 456                 "echo FDT DOWNLOAD FAILED; "                            \
 457         "fi;"
 458
 459 #define CONFIG_PROG_FDT2                                                \
 460         "$download_cmd $fdtaddr $fdtfile; "                             \
 461         "if test $? -eq 0; then "                                       \
 462                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 463                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 464                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 465                 "if test $? -ne 0; then "                               \
 466                         "echo FDT PROGRAM FAILED; "                     \
 467                 "else; "                                                \
 468                         "echo FDT PROGRAM SUCCEEDED; "                  \
 469                 "fi; "                                                  \
 470         "else; "                                                        \
 471                 "echo FDT DOWNLOAD FAILED; "                            \
 472         "fi;"
 473
 474 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 475         "autoload=yes\0"                                                \
 476         "download_cmd=tftp\0"                                           \
 477         "console_args=console=ttyS0,115200\0"                           \
 478         "root_args=root=/dev/nfs rw\0"                                  \
 479         "misc_args=ip=on\0"                                             \
 480         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 481         "bootfile=/home/user/file\0"                                    \
 482         "osfile=/home/user/board.uImage\0"                              \
 483         "fdtfile=/home/user/board.dtb\0"                                \
 484         "ubootfile=/home/user/u-boot.bin\0"                             \
 485         "fdtaddr=0x1e00000\0"                                           \
 486         "osaddr=0x1000000\0"                                            \
 487         "loadaddr=0x1000000\0"                                          \
 488         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 489         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 490         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 491         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 492         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 493         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 494         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 495         "bootcmd_flash1=run set_bootargs; "                             \
 496                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 497         "bootcmd_flash2=run set_bootargs; "                             \
 498                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 499         "bootcmd=run bootcmd_flash1\0"
 500 #endif  /* __CONFIG_H */