include/configs/xpedite520x.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2008 Extreme Engineering Solutions, Inc.
   4  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   5  */
   6
   7 /*
   8  * xpedite520x board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  17 #define CONFIG_SYS_FORM_PMC_XMC 1
  18
  19 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  20 #define CONFIG_PCI1             1       /* PCI controller 1 */
  21 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  22 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  23 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  24
  25 /*
  26  * DDR config
  27  */
  28 #undef CONFIG_FSL_DDR_INTERACTIVE
  29 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  30 #define CONFIG_DDR_SPD
  31 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  32 #define SPD_EEPROM_ADDRESS              0x54
  33 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  34 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  35 #define CONFIG_DDR_ECC
  36 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  37 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  38 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  39 #define CONFIG_VERY_BIG_RAM
  40
  41 #define CONFIG_SYS_CLK_FREQ     66666666
  42
  43 /*
  44  * These can be toggled for performance analysis, otherwise use default.
  45  */
  46 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  47 #define CONFIG_BTB                      /* toggle branch predition */
  48 #define CONFIG_ENABLE_36BIT_PHYS        1
  49
  50 #define CONFIG_SYS_CCSRBAR              0xef000000
  51 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  52
  53 /*
  54  * Diagnostics
  55  */
  56 #define CONFIG_SYS_MEMTEST_START        0x10000000
  57 #define CONFIG_SYS_MEMTEST_END          0x20000000
  58 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
  59                                          CONFIG_SYS_POST_I2C)
  60 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
  61                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
  62                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
  63                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
  64                                          CONFIG_SYS_I2C_RTC_ADDR}
  65
  66 /*
  67  * Memory map
  68  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  69  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  70  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  71  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  72  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  73  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  74  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
  75  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
  76  */
  77
  78 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
  79
  80 /*
  81  * NAND flash configuration
  82  */
  83 #define CONFIG_SYS_NAND_BASE            0xef800000
  84 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
  85 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  86 #define CONFIG_NAND_ACTL
  87 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
  88 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
  89 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
  90 #define CONFIG_SYS_NAND_ACTL_DELAY      25
  91
  92 /*
  93  * NOR flash configuration
  94  */
  95 #define CONFIG_SYS_FLASH_BASE           0xfc000000
  96 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
  97 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
  98 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
  99 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 100 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 101 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 102 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 103                                                   {0xfbf40000, 0xc0000} }
 104 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 105
 106 /*
 107  * Chip select configuration
 108  */
 109 /* NOR Flash 0 on CS0 */
 110 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 111                                  BR_PS_16               | \
 112                                  BR_V)
 113 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 114                                  OR_GPCM_ACS_DIV4       | \
 115                                  OR_GPCM_SCY_8)
 116
 117 /* NOR Flash 1 on CS1 */
 118 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 119                                  BR_PS_16               | \
 120                                  BR_V)
 121 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 122
 123 /* NAND flash on CS2 */
 124 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 125                                  BR_PS_8                | \
 126                                  BR_V)
 127
 128 /* NAND flash on CS2 */
 129 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 130                                  OR_GPCM_BCTLD          | \
 131                                  OR_GPCM_CSNT           | \
 132                                  OR_GPCM_ACS_DIV4       | \
 133                                  OR_GPCM_SCY_4          | \
 134                                  OR_GPCM_TRLX           | \
 135                                  OR_GPCM_EHTR)
 136
 137 /* NAND flash on CS3 */
 138 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 139                                  BR_PS_8                | \
 140                                  BR_V)
 141 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 142
 143 /*
 144  * Use L1 as initial stack
 145  */
 146 #define CONFIG_SYS_INIT_RAM_LOCK        1
 147 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 148 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
 149
 150 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 151 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 152
 153 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 154 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 155
 156 /*
 157  * Serial Port
 158  */
 159 #define CONFIG_SYS_NS16550_SERIAL
 160 #define CONFIG_SYS_NS16550_REG_SIZE     1
 161 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 162 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 163 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 164 #define CONFIG_SYS_BAUDRATE_TABLE       \
 165         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 166 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 167 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 168
 169 /*
 170  * I2C
 171  */
 172 #define CONFIG_SYS_I2C
 173 #define CONFIG_SYS_I2C_FSL
 174 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 175 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 176 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 177 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 178 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 179 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 180
 181 /* I2C EEPROM */
 182 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 183 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 184 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 185 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 186
 187 /* I2C RTC */
 188 #define CONFIG_RTC_M41T11                       1
 189 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 190 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 191
 192 /* GPIO */
 193 #define CONFIG_PCA953X
 194 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 195 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 196 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 197
 198 /* PCA957 @ 0x18 */
 199 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 200 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 201 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 202 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 203 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 204 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
 205 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 206 #define CONFIG_SYS_PCA953X_EREADY               0x80
 207
 208 /* PCA957 @ 0x19 */
 209 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 210 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 211 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 212 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 213 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 214 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 215 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 216 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 217
 218 /* 12-bit ADC used to measure CPU diode */
 219 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
 220
 221 /*
 222  * General PCI
 223  * Memory space is mapped 1-1, but I/O space must start from 0.
 224  */
 225 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 226 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 227 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 228 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 229 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 230 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 231
 232 /*
 233  * Networking options
 234  */
 235 #define CONFIG_ETHPRIME         "eTSEC1"
 236
 237 #define CONFIG_TSEC1            1
 238 #define CONFIG_TSEC1_NAME       "eTSEC1"
 239 #define TSEC1_FLAGS             TSEC_GIGABIT
 240 #define TSEC1_PHY_ADDR          1
 241 #define TSEC1_PHYIDX            0
 242 #define CONFIG_HAS_ETH0
 243
 244 #define CONFIG_TSEC2            1
 245 #define CONFIG_TSEC2_NAME       "eTSEC2"
 246 #define TSEC2_FLAGS             TSEC_GIGABIT
 247 #define TSEC2_PHY_ADDR          2
 248 #define TSEC2_PHYIDX            0
 249 #define CONFIG_HAS_ETH1
 250
 251 #define CONFIG_TSEC3    1
 252 #define CONFIG_TSEC3_NAME       "eTSEC3"
 253 #define TSEC3_FLAGS             TSEC_GIGABIT
 254 #define TSEC3_PHY_ADDR          3
 255 #define TSEC3_PHYIDX            0
 256 #define CONFIG_HAS_ETH2
 257
 258 #define CONFIG_TSEC4    1
 259 #define CONFIG_TSEC4_NAME       "eTSEC4"
 260 #define TSEC4_FLAGS             TSEC_GIGABIT
 261 #define TSEC4_PHY_ADDR          4
 262 #define TSEC4_PHYIDX            0
 263 #define CONFIG_HAS_ETH3
 264
 265 /*
 266  * BOOTP options
 267  */
 268 #define CONFIG_BOOTP_BOOTFILESIZE
 269
 270 /*
 271  * Miscellaneous configurable options
 272  */
 273 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 274 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 275 #define CONFIG_PREBOOT                          /* enable preboot variable */
 276 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 277 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 278
 279 /*
 280  * For booting Linux, the board info and command line data
 281  * have to be in the first 16 MB of memory, since this is
 282  * the maximum mapped by the Linux kernel during initialization.
 283  */
 284 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 285 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 286
 287 /*
 288  * Environment Configuration
 289  */
 290 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 291 #define CONFIG_ENV_SIZE         0x8000
 292 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 293
 294 /*
 295  * Flash memory map:
 296  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 297  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 298  * fff00000 - fff3ffff     Pri FDT (256KB)
 299  * fef00000 - ffefffff     Pri OS image (16MB)
 300  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 301  *
 302  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 303  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 304  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 305  * faf00000 - fbefffff     Sec OS image (16MB)
 306  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 307  */
 308 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
 309 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
 310 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
 311 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
 312 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 313 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
 314
 315 #define CONFIG_PROG_UBOOT1                                              \
 316         "$download_cmd $loadaddr $ubootfile; "                          \
 317         "if test $? -eq 0; then "                                       \
 318                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 319                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 320                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 321                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 322                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 323                 "if test $? -ne 0; then "                               \
 324                         "echo PROGRAM FAILED; "                         \
 325                 "else; "                                                \
 326                         "echo PROGRAM SUCCEEDED; "                      \
 327                 "fi; "                                                  \
 328         "else; "                                                        \
 329                 "echo DOWNLOAD FAILED; "                                \
 330         "fi;"
 331
 332 #define CONFIG_PROG_UBOOT2                                              \
 333         "$download_cmd $loadaddr $ubootfile; "                          \
 334         "if test $? -eq 0; then "                                       \
 335                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 336                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 337                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 338                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 339                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 340                 "if test $? -ne 0; then "                               \
 341                         "echo PROGRAM FAILED; "                         \
 342                 "else; "                                                \
 343                         "echo PROGRAM SUCCEEDED; "                      \
 344                 "fi; "                                                  \
 345         "else; "                                                        \
 346                 "echo DOWNLOAD FAILED; "                                \
 347         "fi;"
 348
 349 #define CONFIG_BOOT_OS_NET                                              \
 350         "$download_cmd $osaddr $osfile; "                               \
 351         "if test $? -eq 0; then "                                       \
 352                 "if test -n $fdtaddr; then "                            \
 353                         "$download_cmd $fdtaddr $fdtfile; "             \
 354                         "if test $? -eq 0; then "                       \
 355                                 "bootm $osaddr - $fdtaddr; "            \
 356                         "else; "                                        \
 357                                 "echo FDT DOWNLOAD FAILED; "            \
 358                         "fi; "                                          \
 359                 "else; "                                                \
 360                         "bootm $osaddr; "                               \
 361                 "fi; "                                                  \
 362         "else; "                                                        \
 363                 "echo OS DOWNLOAD FAILED; "                             \
 364         "fi;"
 365
 366 #define CONFIG_PROG_OS1                                                 \
 367         "$download_cmd $osaddr $osfile; "                               \
 368         "if test $? -eq 0; then "                                       \
 369                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 370                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 371                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 372                 "if test $? -ne 0; then "                               \
 373                         "echo OS PROGRAM FAILED; "                      \
 374                 "else; "                                                \
 375                         "echo OS PROGRAM SUCCEEDED; "                   \
 376                 "fi; "                                                  \
 377         "else; "                                                        \
 378                 "echo OS DOWNLOAD FAILED; "                             \
 379         "fi;"
 380
 381 #define CONFIG_PROG_OS2                                                 \
 382         "$download_cmd $osaddr $osfile; "                               \
 383         "if test $? -eq 0; then "                                       \
 384                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 385                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 386                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 387                 "if test $? -ne 0; then "                               \
 388                         "echo OS PROGRAM FAILED; "                      \
 389                 "else; "                                                \
 390                         "echo OS PROGRAM SUCCEEDED; "                   \
 391                 "fi; "                                                  \
 392         "else; "                                                        \
 393                 "echo OS DOWNLOAD FAILED; "                             \
 394         "fi;"
 395
 396 #define CONFIG_PROG_FDT1                                                \
 397         "$download_cmd $fdtaddr $fdtfile; "                             \
 398         "if test $? -eq 0; then "                                       \
 399                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 400                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 401                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 402                 "if test $? -ne 0; then "                               \
 403                         "echo FDT PROGRAM FAILED; "                     \
 404                 "else; "                                                \
 405                         "echo FDT PROGRAM SUCCEEDED; "                  \
 406                 "fi; "                                                  \
 407         "else; "                                                        \
 408                 "echo FDT DOWNLOAD FAILED; "                            \
 409         "fi;"
 410
 411 #define CONFIG_PROG_FDT2                                                \
 412         "$download_cmd $fdtaddr $fdtfile; "                             \
 413         "if test $? -eq 0; then "                                       \
 414                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 415                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 416                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 417                 "if test $? -ne 0; then "                               \
 418                         "echo FDT PROGRAM FAILED; "                     \
 419                 "else; "                                                \
 420                         "echo FDT PROGRAM SUCCEEDED; "                  \
 421                 "fi; "                                                  \
 422         "else; "                                                        \
 423                 "echo FDT DOWNLOAD FAILED; "                            \
 424         "fi;"
 425
 426 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 427         "autoload=yes\0"                                                \
 428         "download_cmd=tftp\0"                                           \
 429         "console_args=console=ttyS0,115200\0"                           \
 430         "root_args=root=/dev/nfs rw\0"                                  \
 431         "misc_args=ip=on\0"                                             \
 432         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 433         "bootfile=/home/user/file\0"                                    \
 434         "osfile=/home/user/board.uImage\0"                              \
 435         "fdtfile=/home/user/board.dtb\0"                                \
 436         "ubootfile=/home/user/u-boot.bin\0"                             \
 437         "fdtaddr=0x1e00000\0"                                           \
 438         "osaddr=0x1000000\0"                                            \
 439         "loadaddr=0x1000000\0"                                          \
 440         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 441         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 442         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 443         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 444         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 445         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 446         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 447         "bootcmd_flash1=run set_bootargs; "                             \
 448                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 449         "bootcmd_flash2=run set_bootargs; "                             \
 450                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 451         "bootcmd=run bootcmd_flash1\0"
 452 #endif  /* __CONFIG_H */