include/configs/xpedite517x.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009 Extreme Engineering Solutions, Inc.
   4  * Copyright 2007-2008 Freescale Semiconductor, Inc.
   5  */
   6
   7 /*
   8  * xpedite517x board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_SYS_BOARD_NAME   "XPedite5170"
  17 #define CONFIG_SYS_FORM_3U_VPX  1
  18 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  19 #define CONFIG_BAT_RW           1       /* Use common BAT rw code */
  20 #define CONFIG_HIGH_BATS        1       /* High BATs supported and enabled */
  21 #define CONFIG_ALTIVEC          1
  22
  23 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  24 #define CONFIG_PCIE1            1       /* PCIE controller 1 */
  25 #define CONFIG_PCIE2            1       /* PCIE controller 2 */
  26 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  27 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  28 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  29
  30 /*
  31  * DDR config
  32  */
  33 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  34 #define CONFIG_DDR_SPD
  35 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  36 #define SPD_EEPROM_ADDRESS1             0x54    /* Both channels use the */
  37 #define SPD_EEPROM_ADDRESS2             0x54    /* same SPD data         */
  38 #define SPD_EEPROM_OFFSET               0x200   /* OFFSET of SPD in EEPROM */
  39 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  40 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  41 #define CONFIG_DDR_ECC
  42 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  43 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
  44 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  45 #define CONFIG_VERY_BIG_RAM
  46 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
  47
  48 /*
  49  * virtual address to be used for temporary mappings.  There
  50  * should be 128k free at this VA.
  51  */
  52 #define CONFIG_SYS_SCRATCH_VA   0xe0000000
  53
  54 #ifndef __ASSEMBLY__
  55 extern unsigned long get_board_sys_clk(unsigned long dummy);
  56 #endif
  57
  58 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC86xx */
  59
  60 /*
  61  * L2CR setup
  62  */
  63 #define CONFIG_SYS_L2
  64 #define L2_INIT         0
  65 #define L2_ENABLE       (L2CR_L2E)
  66
  67 /*
  68  * Base addresses -- Note these are effective addresses where the
  69  * actual resources get mapped (not physical addresses)
  70  */
  71 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
  72 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR
  73 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  74 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
  75 #define CONFIG_SYS_IMMR                 CONFIG_SYS_CCSRBAR
  76
  77 /*
  78  * Diagnostics
  79  */
  80 #define CONFIG_SYS_MEMTEST_START        0x10000000
  81 #define CONFIG_SYS_MEMTEST_END          0x20000000
  82 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY |\
  83                                          CONFIG_SYS_POST_I2C)
  84 /* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
  85 #define I2C_ADDR_IGNORE_LIST            {0x50}
  86
  87 /*
  88  * Memory map
  89  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  90  * 0x8000_0000  0xbfff_ffff     PCIe1 Mem               1G non-cacheable
  91  * 0xc000_0000  0xcfff_ffff     PCIe2 Mem               256M non-cacheable
  92  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  93  * 0xe800_0000  0xe87f_ffff     PCIe1 IO                8M non-cacheable
  94  * 0xe880_0000  0xe8ff_ffff     PCIe2 IO                8M non-cacheable
  95  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  96  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  97  * 0xf000_0000  0xf7ff_ffff     NOR Flash 2             128M non-cacheable
  98  * 0xf800_0000  0xffff_ffff     NOR Flash 1             128M non-cacheable
  99  */
 100
 101 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_4 | LCRR_EADC_3)
 102
 103 /*
 104  * NAND flash configuration
 105  */
 106 #define CONFIG_SYS_NAND_BASE            0xef800000
 107 #define CONFIG_SYS_NAND_BASE2           0xef840000      /* Unused at this time */
 108 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE2}
 109 #define CONFIG_SYS_MAX_NAND_DEVICE      2
 110 #define CONFIG_NAND_ACTL
 111 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 14)       /* C_LA14 */
 112 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 15)       /* C_LA15 */
 113 #define CONFIG_SYS_NAND_ACTL_NCE        0               /* NCE not controlled by ADDR */
 114 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 115 #define CONFIG_JFFS2_NAND
 116
 117 /*
 118  * NOR flash configuration
 119  */
 120 #define CONFIG_SYS_FLASH_BASE           0xf8000000
 121 #define CONFIG_SYS_FLASH_BASE2          0xf0000000
 122 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 123 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 124 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 125 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 126 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 127 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff00000, 0xc0000}, \
 128                                                   {0xf7f00000, 0xc0000} }
 129 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 130 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 131
 132 /*
 133  * Chip select configuration
 134  */
 135 /* NOR Flash 0 on CS0 */
 136 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  |\
 137                                  BR_PS_16               |\
 138                                  BR_V)
 139 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_128MB            |\
 140                                  OR_GPCM_CSNT           |\
 141                                  OR_GPCM_XACS           |\
 142                                  OR_GPCM_ACS_DIV2       |\
 143                                  OR_GPCM_SCY_8          |\
 144                                  OR_GPCM_TRLX           |\
 145                                  OR_GPCM_EHTR           |\
 146                                  OR_GPCM_EAD)
 147
 148 /* NOR Flash 1 on CS1 */
 149 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 |\
 150                                  BR_PS_16               |\
 151                                  BR_V)
 152 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 153
 154 /* NAND flash on CS2 */
 155 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   |\
 156                                  BR_PS_8                |\
 157                                  BR_V)
 158 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            |\
 159                                  OR_GPCM_BCTLD          |\
 160                                  OR_GPCM_CSNT           |\
 161                                  OR_GPCM_ACS_DIV4       |\
 162                                  OR_GPCM_SCY_4          |\
 163                                  OR_GPCM_TRLX           |\
 164                                  OR_GPCM_EHTR)
 165
 166 /* Optional NAND flash on CS3 */
 167 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  |\
 168                                  BR_PS_8                |\
 169                                  BR_V)
 170 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 171
 172 /*
 173  * Use L1 as initial stack
 174  */
 175 #define CONFIG_SYS_INIT_RAM_LOCK        1
 176 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 177 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 178
 179 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 180 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 181
 182 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 183 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 184
 185 /*
 186  * Serial Port
 187  */
 188 #define CONFIG_SYS_NS16550_SERIAL
 189 #define CONFIG_SYS_NS16550_REG_SIZE     1
 190 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 191 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 192 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 193 #define CONFIG_SYS_BAUDRATE_TABLE       \
 194         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 195 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 196 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 197
 198 /*
 199  * I2C
 200  */
 201 #define CONFIG_SYS_I2C
 202 #define CONFIG_SYS_I2C_FSL
 203 #define CONFIG_SYS_FSL_I2C_SPEED        100000
 204 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 205 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 206 #define CONFIG_SYS_FSL_I2C2_SPEED       100000
 207 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 208 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 209
 210 /* PEX8518 slave I2C interface */
 211 #define CONFIG_SYS_I2C_PEX8518_ADDR     0x70
 212
 213 /* I2C DS1631 temperature sensor */
 214 #define CONFIG_SYS_I2C_LM90_ADDR        0x4c
 215
 216 /* I2C EEPROM - AT24C128B */
 217 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x54
 218 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 219 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 220 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 221
 222 /* I2C RTC */
 223 #define CONFIG_RTC_M41T11               1
 224 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 225 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 226
 227 /* GPIO */
 228 #define CONFIG_PCA953X
 229 #define CONFIG_SYS_I2C_PCA953X_ADDR0    0x18
 230 #define CONFIG_SYS_I2C_PCA953X_ADDR1    0x1c
 231 #define CONFIG_SYS_I2C_PCA953X_ADDR2    0x1e
 232 #define CONFIG_SYS_I2C_PCA953X_ADDR3    0x1f
 233 #define CONFIG_SYS_I2C_PCA953X_ADDR     CONFIG_SYS_I2C_PCA953X_ADDR0
 234 #define CONFIG_SYS_I2C_PCA9553_ADDR     0x62
 235
 236 /*
 237  * PU = pulled high, PD = pulled low
 238  * I = input, O = output, IO = input/output
 239  */
 240 /* PCA9557 @ 0x18*/
 241 #define CONFIG_SYS_PCA953X_C0_SER0_EN           0x01 /* PU; UART0 enable (1: enabled) */
 242 #define CONFIG_SYS_PCA953X_C0_SER0_MODE         0x02 /* PU; UART0 serial mode select */
 243 #define CONFIG_SYS_PCA953X_C0_SER1_EN           0x04 /* PU; UART1 enable (1: enabled) */
 244 #define CONFIG_SYS_PCA953X_C0_SER1_MODE         0x08 /* PU; UART1 serial mode select */
 245 #define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS     0x10 /* PU; Boot flash CS select */
 246 #define CONFIG_SYS_PCA953X_NVM_WP               0x20 /* PU; Set to 0 to enable NVM writing */
 247
 248 /* PCA9557 @ 0x1c*/
 249 #define CONFIG_SYS_PCA953X_XMC0_ROOT0           0x01 /* PU; Low if XMC is RC */
 250 #define CONFIG_SYS_PCA953X_PLUG_GPIO0           0x02 /* Samtec connector GPIO */
 251 #define CONFIG_SYS_PCA953X_XMC0_WAKE            0x04 /* PU; XMC wake */
 252 #define CONFIG_SYS_PCA953X_XMC0_BIST            0x08 /* PU; XMC built in self test */
 253 #define CONFIG_SYS_PCA953X_XMC_PRESENT          0x10 /* PU; Low if XMC module installed */
 254 #define CONFIG_SYS_PCA953X_PMC_PRESENT          0x20 /* PU; Low if PMC module installed */
 255 #define CONFIG_SYS_PCA953X_PMC0_MONARCH         0x40 /* PMC monarch mode enable */
 256 #define CONFIG_SYS_PCA953X_PMC0_EREADY          0x80 /* PU; PMC PCI eready */
 257
 258 /* PCA9557 @ 0x1e*/
 259 #define CONFIG_SYS_PCA953X_P0_GA0               0x01 /* PU; VPX Geographical address */
 260 #define CONFIG_SYS_PCA953X_P0_GA1               0x02 /* PU; VPX Geographical address */
 261 #define CONFIG_SYS_PCA953X_P0_GA2               0x04 /* PU; VPX Geographical address */
 262 #define CONFIG_SYS_PCA953X_P0_GA3               0x08 /* PU; VPX Geographical address */
 263 #define CONFIG_SYS_PCA953X_P0_GA4               0x10 /* PU; VPX Geographical address */
 264 #define CONFIG_SYS_PCA953X_P0_GAP               0x20 /* PU; VPX Geographical address parity */
 265 #define CONFIG_SYS_PCA953X_P1_SYSEN             0x80 /* PU; VPX P1 SYSCON */
 266
 267 /* PCA9557 @ 0x1f */
 268 #define CONFIG_SYS_PCA953X_VPX_GPIO0            0x01 /* PU; VPX P15 GPIO */
 269 #define CONFIG_SYS_PCA953X_VPX_GPIO1            0x02 /* PU; VPX P15 GPIO */
 270 #define CONFIG_SYS_PCA953X_VPX_GPIO2            0x04 /* PU; VPX P15 GPIO */
 271 #define CONFIG_SYS_PCA953X_VPX_GPIO3            0x08 /* PU; VPX P15 GPIO */
 272
 273 /*
 274  * General PCI
 275  * Memory space is mapped 1-1, but I/O space must start from 0.
 276  */
 277 /* PCIE1 - PEX8518 */
 278 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 279 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_BUS
 280 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x40000000      /* 1G */
 281 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 282 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe8000000
 283 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 284
 285 /* PCIE2 - VPX P1 */
 286 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 287 #define CONFIG_SYS_PCIE2_MEM_PHYS       CONFIG_SYS_PCIE2_MEM_BUS
 288 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 289 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 290 #define CONFIG_SYS_PCIE2_IO_PHYS        0xe8800000
 291 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000      /* 8M */
 292
 293 /*
 294  * Networking options
 295  */
 296 #define CONFIG_ETHPRIME         "eTSEC1"
 297
 298 #define CONFIG_TSEC1            1
 299 #define CONFIG_TSEC1_NAME       "eTSEC1"
 300 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 301 #define TSEC1_PHY_ADDR          1
 302 #define TSEC1_PHYIDX            0
 303 #define CONFIG_HAS_ETH0
 304
 305 #define CONFIG_TSEC2            1
 306 #define CONFIG_TSEC2_NAME       "eTSEC2"
 307 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 308 #define TSEC2_PHY_ADDR          2
 309 #define TSEC2_PHYIDX            0
 310 #define CONFIG_HAS_ETH1
 311
 312 /*
 313  * BAT mappings
 314  */
 315 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 316 #define CONFIG_SYS_CCSR_DEFAULT_DBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 317                                          BATL_PP_RW                     |\
 318                                          BATL_CACHEINHIBIT              |\
 319                                          BATL_GUARDEDSTORAGE)
 320 #define CONFIG_SYS_CCSR_DEFAULT_DBATU   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 321                                          BATU_BL_1M                     |\
 322                                          BATU_VS                        |\
 323                                          BATU_VP)
 324 #define CONFIG_SYS_CCSR_DEFAULT_IBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 325                                          BATL_PP_RW                     |\
 326                                          BATL_CACHEINHIBIT)
 327 #define CONFIG_SYS_CCSR_DEFAULT_IBATU   CONFIG_SYS_CCSR_DEFAULT_DBATU
 328 #endif
 329
 330 /*
 331  * BAT0         2G      Cacheable, non-guarded
 332  * 0x0000_0000  2G      DDR
 333  */
 334 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 335 #define CONFIG_SYS_DBAT0U       (BATU_BL_2G | BATU_VS | BATU_VP)
 336 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 337 #define CONFIG_SYS_IBAT0U       CONFIG_SYS_DBAT0U
 338
 339 /*
 340  * BAT1         1G      Cache-inhibited, guarded
 341  * 0x8000_0000  1G      PCI-Express 1 Memory
 342  */
 343 #define CONFIG_SYS_DBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 344                                  BATL_PP_RW                     |\
 345                                  BATL_CACHEINHIBIT              |\
 346                                  BATL_GUARDEDSTORAGE)
 347 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 348                                  BATU_BL_1G                     |\
 349                                  BATU_VS                        |\
 350                                  BATU_VP)
 351 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 352                                  BATL_PP_RW                     |\
 353                                  BATL_CACHEINHIBIT)
 354 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 355
 356 /*
 357  * BAT2         512M    Cache-inhibited, guarded
 358  * 0xc000_0000  512M    PCI-Express 2 Memory
 359  */
 360 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 361                                  BATL_PP_RW                     |\
 362                                  BATL_CACHEINHIBIT              |\
 363                                  BATL_GUARDEDSTORAGE)
 364 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 365                                  BATU_BL_512M                   |\
 366                                  BATU_VS                        |\
 367                                  BATU_VP)
 368 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 369                                  BATL_PP_RW                     |\
 370                                  BATL_CACHEINHIBIT)
 371 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 372
 373 /*
 374  * BAT3         1M      Cache-inhibited, guarded
 375  * 0xe000_0000  1M      CCSR
 376  */
 377 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_CCSRBAR             |\
 378                                  BATL_PP_RW                     |\
 379                                  BATL_CACHEINHIBIT              |\
 380                                  BATL_GUARDEDSTORAGE)
 381 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR             |\
 382                                  BATU_BL_1M                     |\
 383                                  BATU_VS                        |\
 384                                  BATU_VP)
 385 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR             |\
 386                                  BATL_PP_RW                     |\
 387                                  BATL_CACHEINHIBIT)
 388 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 389
 390 /*
 391  * BAT4         32M     Cache-inhibited, guarded
 392  * 0xe200_0000  16M     PCI-Express 1 I/O
 393  * 0xe300_0000  16M     PCI-Express 2 I/0
 394  */
 395 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 396                                  BATL_PP_RW                     |\
 397                                  BATL_CACHEINHIBIT              |\
 398                                  BATL_GUARDEDSTORAGE)
 399 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 400                                  BATU_BL_32M                    |\
 401                                  BATU_VS                        |\
 402                                  BATU_VP)
 403 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 404                                  BATL_PP_RW                     |\
 405                                  BATL_CACHEINHIBIT)
 406 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 407
 408 /*
 409  * BAT5         128K    Cacheable, non-guarded
 410  * 0xe400_1000  128K    Init RAM for stack in the CPU DCache (no backing memory)
 411  */
 412 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR       |\
 413                                  BATL_PP_RW                     |\
 414                                  BATL_MEMCOHERENCE)
 415 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR       |\
 416                                  BATU_BL_128K                   |\
 417                                  BATU_VS                        |\
 418                                  BATU_VP)
 419 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 420 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 421
 422 /*
 423  * BAT6         256M    Cache-inhibited, guarded
 424  * 0xf000_0000  256M    FLASH
 425  */
 426 #define CONFIG_SYS_DBAT6L       (CONFIG_SYS_FLASH_BASE2         |\
 427                                  BATL_PP_RW                     |\
 428                                  BATL_CACHEINHIBIT              |\
 429                                  BATL_GUARDEDSTORAGE)
 430 #define CONFIG_SYS_DBAT6U       (CONFIG_SYS_FLASH_BASE          |\
 431                                  BATU_BL_256M                   |\
 432                                  BATU_VS                        |\
 433                                  BATU_VP)
 434 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_FLASH_BASE          |\
 435                                  BATL_PP_RW                     |\
 436                                  BATL_MEMCOHERENCE)
 437 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 438
 439 /* Map the last 1M of flash where we're running from reset */
 440 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 441                                  BATL_PP_RW                     |\
 442                                  BATL_CACHEINHIBIT              |\
 443                                  BATL_GUARDEDSTORAGE)
 444 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE                   |\
 445                                  BATU_BL_1M                     |\
 446                                  BATU_VS                        |\
 447                                  BATU_VP)
 448 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 449                                  BATL_PP_RW                     |\
 450                                  BATL_MEMCOHERENCE)
 451 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 452
 453 /*
 454  * BAT7         64M     Cache-inhibited, guarded
 455  * 0xe800_0000  64K     NAND FLASH
 456  * 0xe804_0000  128K    DUART Registers
 457  */
 458 #define CONFIG_SYS_DBAT7L       (CONFIG_SYS_NAND_BASE           |\
 459                                  BATL_PP_RW                     |\
 460                                  BATL_CACHEINHIBIT              |\
 461                                  BATL_GUARDEDSTORAGE)
 462 #define CONFIG_SYS_DBAT7U       (CONFIG_SYS_NAND_BASE           |\
 463                                  BATU_BL_512K                   |\
 464                                  BATU_VS                        |\
 465                                  BATU_VP)
 466 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_NAND_BASE           |\
 467                                  BATL_PP_RW                     |\
 468                                  BATL_CACHEINHIBIT)
 469 #define CONFIG_SYS_IBAT7U       CONFIG_SYS_DBAT7U
 470
 471 /*
 472  * Miscellaneous configurable options
 473  */
 474 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 475 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 476 #define CONFIG_PREBOOT                          /* enable preboot variable */
 477 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 478
 479 /*
 480  * For booting Linux, the board info and command line data
 481  * have to be in the first 16 MB of memory, since this is
 482  * the maximum mapped by the Linux kernel during initialization.
 483  */
 484 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 485 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 486
 487 /*
 488  * Environment Configuration
 489  */
 490 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 491 #define CONFIG_ENV_SIZE         0x8000
 492 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 493
 494 /*
 495  * Flash memory map:
 496  * fffc0000 - ffffffff  Pri FDT (256KB)
 497  * fff80000 - fffbffff  Pri U-Boot Environment (256 KB)
 498  * fff00000 - fff7ffff  Pri U-Boot (512 KB)
 499  * fef00000 - ffefffff  Pri OS image (16MB)
 500  * f8000000 - feefffff  Pri OS Use/Filesystem (111MB)
 501  *
 502  * f7fc0000 - f7ffffff  Sec FDT (256KB)
 503  * f7f80000 - f7fbffff  Sec U-Boot Environment (256 KB)
 504  * f7f00000 - f7f7ffff  Sec U-Boot (512 KB)
 505  * f6f00000 - f7efffff  Sec OS image (16MB)
 506  * f0000000 - f6efffff  Sec OS Use/Filesystem (111MB)
 507  */
 508 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff00000)
 509 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xf7f00000)
 510 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfffc0000)
 511 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xf7fc0000)
 512 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 513 #define CONFIG_OS2_ENV_ADDR     __stringify(0xf6f00000)
 514
 515 #define CONFIG_PROG_UBOOT1                                              \
 516         "$download_cmd $loadaddr $ubootfile; "                          \
 517         "if test $? -eq 0; then "                                       \
 518                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 519                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 520                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 521                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 522                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 523                 "if test $? -ne 0; then "                               \
 524                         "echo PROGRAM FAILED; "                         \
 525                 "else; "                                                \
 526                         "echo PROGRAM SUCCEEDED; "                      \
 527                 "fi; "                                                  \
 528         "else; "                                                        \
 529                 "echo DOWNLOAD FAILED; "                                \
 530         "fi;"
 531
 532 #define CONFIG_PROG_UBOOT2                                              \
 533         "$download_cmd $loadaddr $ubootfile; "                          \
 534         "if test $? -eq 0; then "                                       \
 535                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 536                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 537                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 538                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 539                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 540                 "if test $? -ne 0; then "                               \
 541                         "echo PROGRAM FAILED; "                         \
 542                 "else; "                                                \
 543                         "echo PROGRAM SUCCEEDED; "                      \
 544                 "fi; "                                                  \
 545         "else; "                                                        \
 546                 "echo DOWNLOAD FAILED; "                                \
 547         "fi;"
 548
 549 #define CONFIG_BOOT_OS_NET                                              \
 550         "$download_cmd $osaddr $osfile; "                               \
 551         "if test $? -eq 0; then "                                       \
 552                 "if test -n $fdtaddr; then "                            \
 553                         "$download_cmd $fdtaddr $fdtfile; "             \
 554                         "if test $? -eq 0; then "                       \
 555                                 "bootm $osaddr - $fdtaddr; "            \
 556                         "else; "                                        \
 557                                 "echo FDT DOWNLOAD FAILED; "            \
 558                         "fi; "                                          \
 559                 "else; "                                                \
 560                         "bootm $osaddr; "                               \
 561                 "fi; "                                                  \
 562         "else; "                                                        \
 563                 "echo OS DOWNLOAD FAILED; "                             \
 564         "fi;"
 565
 566 #define CONFIG_PROG_OS1                                                 \
 567         "$download_cmd $osaddr $osfile; "                               \
 568         "if test $? -eq 0; then "                                       \
 569                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 570                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 571                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 572                 "if test $? -ne 0; then "                               \
 573                         "echo OS PROGRAM FAILED; "                      \
 574                 "else; "                                                \
 575                         "echo OS PROGRAM SUCCEEDED; "                   \
 576                 "fi; "                                                  \
 577         "else; "                                                        \
 578                 "echo OS DOWNLOAD FAILED; "                             \
 579         "fi;"
 580
 581 #define CONFIG_PROG_OS2                                                 \
 582         "$download_cmd $osaddr $osfile; "                               \
 583         "if test $? -eq 0; then "                                       \
 584                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 585                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 586                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 587                 "if test $? -ne 0; then "                               \
 588                         "echo OS PROGRAM FAILED; "                      \
 589                 "else; "                                                \
 590                         "echo OS PROGRAM SUCCEEDED; "                   \
 591                 "fi; "                                                  \
 592         "else; "                                                        \
 593                 "echo OS DOWNLOAD FAILED; "                             \
 594         "fi;"
 595
 596 #define CONFIG_PROG_FDT1                                                \
 597         "$download_cmd $fdtaddr $fdtfile; "                             \
 598         "if test $? -eq 0; then "                                       \
 599                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 600                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 601                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 602                 "if test $? -ne 0; then "                               \
 603                         "echo FDT PROGRAM FAILED; "                     \
 604                 "else; "                                                \
 605                         "echo FDT PROGRAM SUCCEEDED; "                  \
 606                 "fi; "                                                  \
 607         "else; "                                                        \
 608                 "echo FDT DOWNLOAD FAILED; "                            \
 609         "fi;"
 610
 611 #define CONFIG_PROG_FDT2                                                \
 612         "$download_cmd $fdtaddr $fdtfile; "                             \
 613         "if test $? -eq 0; then "                                       \
 614                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 615                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 616                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 617                 "if test $? -ne 0; then "                               \
 618                         "echo FDT PROGRAM FAILED; "                     \
 619                 "else; "                                                \
 620                         "echo FDT PROGRAM SUCCEEDED; "                  \
 621                 "fi; "                                                  \
 622         "else; "                                                        \
 623                 "echo FDT DOWNLOAD FAILED; "                            \
 624         "fi;"
 625
 626 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 627         "autoload=yes\0"                                                \
 628         "download_cmd=tftp\0"                                           \
 629         "console_args=console=ttyS0,115200\0"                           \
 630         "root_args=root=/dev/nfs rw\0"                                  \
 631         "misc_args=ip=on\0"                                             \
 632         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 633         "bootfile=/home/user/file\0"                                    \
 634         "osfile=/home/user/board.uImage\0"                              \
 635         "fdtfile=/home/user/board.dtb\0"                                \
 636         "ubootfile=/home/user/u-boot.bin\0"                             \
 637         "fdtaddr=0x1e00000\0"                                           \
 638         "osaddr=0x1000000\0"                                            \
 639         "loadaddr=0x1000000\0"                                          \
 640         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 641         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 642         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 643         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 644         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 645         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 646         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 647         "bootcmd_flash1=run set_bootargs; "                             \
 648                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 649         "bootcmd_flash2=run set_bootargs; "                             \
 650                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 651         "bootcmd=run bootcmd_flash1\0"
 652 #endif  /* __CONFIG_H */