Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
[platform/kernel/u-boot.git] / include / configs / xpedite1000.h
1 /*
2  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * config for XPedite1000 from XES Inc.
9  * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
10  * (C) Copyright 2003 Sandburst Corporation
11  * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
12  */
13
14 #ifndef __CONFIG_H
15 #define __CONFIG_H
16
17 /* High Level Configuration Options */
18 #define CONFIG_XPEDITE1000      1
19 #define CONFIG_SYS_BOARD_NAME   "XPedite1000"
20 #define CONFIG_SYS_FORM_PMC     1
21 #define CONFIG_440              1
22 #define CONFIG_440GX            1               /* 440 GX */
23 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_pre_init  */
24 #define CONFIG_SYS_CLK_FREQ     33333333        /* external freq to pll */
25
26 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
27
28 /*
29  * DDR config
30  */
31 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup */
32 #define SPD_EEPROM_ADDRESS      {0x54}  /* SPD i2c spd addresses */
33 #define CONFIG_VERY_BIG_RAM     1
34
35 /*
36  * Base addresses -- Note these are effective addresses where the
37  * actual resources get mapped (not physical addresses)
38  */
39 #define CONFIG_SYS_SDRAM_BASE           0x00000000
40 #define CONFIG_SYS_FLASH_BASE           0xff000000      /* start of FLASH */
41 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
42 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped pci memory */
43 #define CONFIG_SYS_ISRAM_BASE           0xc0000000      /* internal SRAM */
44 #define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs */
45 #define CONFIG_SYS_NVRAM_BASE_ADDR      (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
46 #define CONFIG_SYS_GPIO_BASE            (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
47
48 /*
49  * Diagnostics
50  */
51 #define CONFIG_SYS_ALT_MEMTEST
52 #define CONFIG_SYS_MEMTEST_START        0x0400000
53 #define CONFIG_SYS_MEMTEST_END          0x0C00000
54
55 /* POST support */
56 #define CONFIG_POST             (CONFIG_SYS_POST_RTC    | \
57                                  CONFIG_SYS_POST_I2C)
58
59 /*
60  * LED support
61  */
62 #define USR_LED0        0x00000080
63 #define USR_LED1        0x00000100
64 #define USR_LED2        0x00000200
65 #define USR_LED3        0x00000400
66
67 #ifndef __ASSEMBLY__
68 extern unsigned long in32(unsigned int);
69 extern void out32(unsigned int, unsigned long);
70
71 #define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
72 #define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
73 #define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
74 #define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
75
76 #define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
77 #define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
78 #define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
79 #define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
80 #endif
81
82 /*
83  * Use internal SRAM for initial stack
84  */
85 #define CONFIG_SYS_TEMP_STACK_OCM       1
86 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_ISRAM_BASE
87 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_ISRAM_BASE   /* Initial RAM address */
88 #define CONFIG_SYS_INIT_RAM_SIZE                0x2000  /* Size of used area in RAM */
89 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
90 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
91
92 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)    /* Reserve 512 KB for Mon */
93 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
94
95 /*
96  * Serial Port
97  */
98 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
99 #define CONFIG_SYS_NS16550
100 #define CONFIG_SYS_NS16550_SERIAL
101 #define CONFIG_SYS_NS16550_REG_SIZE     1
102 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
103
104 #define CONFIG_SYS_BAUDRATE_TABLE \
105         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
106 #define CONFIG_BAUDRATE                 115200
107 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
108 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
109
110 /*
111  * Use the HUSH parser
112  */
113 #define CONFIG_SYS_HUSH_PARSER
114
115 /*
116  * NOR flash configuration
117  */
118 #define CONFIG_SYS_MAX_FLASH_BANKS      3
119 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
120 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
121 #define CONFIG_FLASH_CFI_DRIVER
122 #define CONFIG_SYS_FLASH_CFI
123 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
124 #define CONFIG_SYS_FLASH_QUIET_TEST             /* MirrorBit flashes are optional */
125 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
126 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
127
128 /*
129  * I2C
130  */
131 #define CONFIG_SYS_I2C
132 #define CONFIG_SYS_I2C_PPC4XX
133 #define CONFIG_SYS_I2C_PPC4XX_CH0
134 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
135 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0           0x7f
136
137 /* I2C EEPROM */
138 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
139 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
140 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
141 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
142
143 /* I2C RTC: STMicro M41T00 */
144 #define CONFIG_RTC_M41T11               1
145 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
146 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
147
148 /*
149  * PCI
150  */
151 /* General PCI */
152 #define CONFIG_PCI                              /* include pci support */
153 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
154 #define CONFIG_PCI_PNP                          /* do pci plug-and-play */
155 #define CONFIG_PCI_SCAN_SHOW                    /* show pci devices on startup */
156 #define CONFIG_SYS_PCI_TARGBASE 0x80000000      /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
157
158 /* Board-specific PCI */
159 #define CONFIG_SYS_PCI_TARGET_INIT              /* let board init pci target */
160 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014   /* IBM */
161 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
162 #define CONFIG_SYS_PCI_FORCE_PCI_CONV           /* Force PCI Conventional Mode */
163
164 /*
165  * Networking options
166  */
167 #define CONFIG_PPC4xx_EMAC
168 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
169 #define CONFIG_MII              1       /* MII PHY management */
170 #define CONFIG_PHY_RESET        1       /* reset phy upon startup */
171 #define CONFIG_SYS_RX_ETH_BUFFER 32     /* Number of ethernet rx buffers & descriptors */
172 #define CONFIG_ETHPRIME         "ppc_4xx_eth2"
173 #define CONFIG_PHY_ADDR         4       /* PHY address phy0 not populated */
174 #define CONFIG_PHY2_ADDR        4       /* PHY address phy2 */
175 #define CONFIG_HAS_ETH2         1       /* add support for "eth2addr" */
176 #define CONFIG_PHY3_ADDR        8       /* PHY address phy3 */
177 #define CONFIG_HAS_ETH3         1       /* add support for "eth3addr" */
178
179 /* BOOTP options */
180 #define CONFIG_BOOTP_BOOTFILESIZE
181 #define CONFIG_BOOTP_BOOTPATH
182 #define CONFIG_BOOTP_GATEWAY
183 #define CONFIG_BOOTP_HOSTNAME
184
185 /*
186  * Command configuration
187  */
188 #include <config_cmd_default.h>
189
190 #define CONFIG_CMD_ASKENV
191 #define CONFIG_CMD_DATE
192 #define CONFIG_CMD_DHCP
193 #define CONFIG_CMD_EEPROM
194 #define CONFIG_CMD_ELF
195 #define CONFIG_CMD_FLASH
196 #define CONFIG_CMD_I2C
197 #define CONFIG_CMD_IRQ
198 #define CONFIG_CMD_JFFS2
199 #define CONFIG_CMD_MII
200 #define CONFIG_CMD_NET
201 #define CONFIG_CMD_PCI
202 #define CONFIG_CMD_PING
203 #define CONFIG_CMD_SAVEENV
204 #define CONFIG_CMD_SNTP
205
206 /*
207  * Miscellaneous configurable options
208  */
209 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
210 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
211 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
212 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
213 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
214 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
215 #define CONFIG_CMDLINE_EDITING  1               /* Command-line editing */
216 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
217 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
218 #define CONFIG_PREBOOT                          /* enable preboot variable */
219 #define CONFIG_FIT              1
220 #define CONFIG_FIT_VERBOSE      1
221 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
222 #define CONFIG_SYS_EXTBDINFO    1               /* To use extended board_into (bd_t) */
223
224 /*
225  * For booting Linux, the board info and command line data
226  * have to be in the first 8 MB of memory, since this is
227  * the maximum mapped by the Linux kernel during initialization.
228  */
229 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
230
231 /*
232  * Environment Configuration
233  */
234 #define CONFIG_ENV_IS_IN_FLASH  1
235 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128k (one sector) for env */
236 #define CONFIG_ENV_SIZE         0x8000
237 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
238
239 /*
240  * Flash memory map:
241  * fff80000 - ffffffff  U-Boot (512 KB)
242  * fff40000 - fff7ffff  U-Boot Environment (256 KB)
243  * fff00000 - fff3ffff  FDT (256KB)
244  * ffc00000 - ffefffff  OS image (3MB)
245  * ff000000 - ffbfffff  OS Use/Filesystem (12MB)
246  */
247
248 #define CONFIG_UBOOT_ENV_ADDR   __stringify(CONFIG_SYS_TEXT_BASE)
249 #define CONFIG_FDT_ENV_ADDR     __stringify(0xfff00000)
250 #define CONFIG_OS_ENV_ADDR      __stringify(0xffc00000)
251
252 #define CONFIG_PROG_UBOOT                                               \
253         "$download_cmd $loadaddr $ubootfile; "                          \
254         "if test $? -eq 0; then "                                       \
255                 "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; "          \
256                 "erase "CONFIG_UBOOT_ENV_ADDR" +80000; "                \
257                 "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; "        \
258                 "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; "           \
259                 "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; "       \
260                 "if test $? -ne 0; then "                               \
261                         "echo PROGRAM FAILED; "                         \
262                 "else; "                                                \
263                         "echo PROGRAM SUCCEEDED; "                      \
264                 "fi; "                                                  \
265         "else; "                                                        \
266                 "echo DOWNLOAD FAILED; "                                \
267         "fi;"
268
269 #define CONFIG_BOOT_OS_NET                                              \
270         "$download_cmd $osaddr $osfile; "                               \
271         "if test $? -eq 0; then "                                       \
272                 "if test -n $fdtaddr; then "                            \
273                         "$download_cmd $fdtaddr $fdtfile; "             \
274                         "if test $? -eq 0; then "                       \
275                                 "bootm $osaddr - $fdtaddr; "            \
276                         "else; "                                        \
277                                 "echo FDT DOWNLOAD FAILED; "            \
278                         "fi; "                                          \
279                 "else; "                                                \
280                         "bootm $osaddr; "                               \
281                 "fi; "                                                  \
282         "else; "                                                        \
283                 "echo OS DOWNLOAD FAILED; "                             \
284         "fi;"
285
286 #define CONFIG_PROG_OS                                                  \
287         "$download_cmd $osaddr $osfile; "                               \
288         "if test $? -eq 0; then "                                       \
289                 "erase "CONFIG_OS_ENV_ADDR" +$filesize; "               \
290                 "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "         \
291                 "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "        \
292                 "if test $? -ne 0; then "                               \
293                         "echo OS PROGRAM FAILED; "                      \
294                 "else; "                                                \
295                         "echo OS PROGRAM SUCCEEDED; "                   \
296                 "fi; "                                                  \
297         "else; "                                                        \
298                 "echo OS DOWNLOAD FAILED; "                             \
299         "fi;"
300
301 #define CONFIG_PROG_FDT                                                 \
302         "$download_cmd $fdtaddr $fdtfile; "                             \
303         "if test $? -eq 0; then "                                       \
304                 "erase "CONFIG_FDT_ENV_ADDR" +$filesize;"               \
305                 "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "       \
306                 "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "      \
307                 "if test $? -ne 0; then "                               \
308                         "echo FDT PROGRAM FAILED; "                     \
309                 "else; "                                                \
310                         "echo FDT PROGRAM SUCCEEDED; "                  \
311                 "fi; "                                                  \
312         "else; "                                                        \
313                 "echo FDT DOWNLOAD FAILED; "                            \
314         "fi;"
315
316 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
317         "autoload=yes\0"                                                \
318         "download_cmd=tftp\0"                                           \
319         "console_args=console=ttyS0,115200\0"                           \
320         "root_args=root=/dev/nfs rw\0"                                  \
321         "misc_args=ip=on\0"                                             \
322         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
323         "bootfile=/home/user/file\0"                                    \
324         "osfile=/home/user/board.uImage\0"                              \
325         "fdtfile=/home/user/board.dtb\0"                                \
326         "ubootfile=/home/user/u-boot.bin\0"                             \
327         "fdtaddr=c00000\0"                                              \
328         "osaddr=0x1000000\0"                                            \
329         "loadaddr=0x1000000\0"                                          \
330         "prog_uboot="CONFIG_PROG_UBOOT"\0"                              \
331         "prog_os="CONFIG_PROG_OS"\0"                                    \
332         "prog_fdt="CONFIG_PROG_FDT"\0"                                  \
333         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
334         "bootcmd_flash=run set_bootargs; "                              \
335                 "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0"  \
336         "bootcmd=run bootcmd_flash\0"
337 #endif  /* __CONFIG_H */