include/configs/xpedite1000.h

   1 /*
   2  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * config for XPedite1000 from XES Inc.
   9  * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
  10  * (C) Copyright 2003 Sandburst Corporation
  11  * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 /* High Level Configuration Options */
  18 #define CONFIG_XPEDITE1000      1
  19 #define CONFIG_SYS_BOARD_NAME   "XPedite1000"
  20 #define CONFIG_SYS_FORM_PMC     1
  21 #define CONFIG_440              1
  22 #define CONFIG_440GX            1               /* 440 GX */
  23 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_pre_init  */
  24 #define CONFIG_SYS_CLK_FREQ     33333333        /* external freq to pll */
  25
  26 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  27
  28 /*
  29  * DDR config
  30  */
  31 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup */
  32 #define SPD_EEPROM_ADDRESS      {0x54}  /* SPD i2c spd addresses */
  33 #define CONFIG_VERY_BIG_RAM     1
  34
  35 /*
  36  * Base addresses -- Note these are effective addresses where the
  37  * actual resources get mapped (not physical addresses)
  38  */
  39 #define CONFIG_SYS_SDRAM_BASE           0x00000000
  40 #define CONFIG_SYS_FLASH_BASE           0xff000000      /* start of FLASH */
  41 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
  42 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped pci memory */
  43 #define CONFIG_SYS_ISRAM_BASE           0xc0000000      /* internal SRAM */
  44 #define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs */
  45 #define CONFIG_SYS_NVRAM_BASE_ADDR      (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
  46 #define CONFIG_SYS_GPIO_BASE            (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
  47
  48 /*
  49  * Diagnostics
  50  */
  51 #define CONFIG_SYS_ALT_MEMTEST
  52 #define CONFIG_SYS_MEMTEST_START        0x0400000
  53 #define CONFIG_SYS_MEMTEST_END          0x0C00000
  54
  55 /* POST support */
  56 #define CONFIG_POST             (CONFIG_SYS_POST_RTC    | \
  57                                  CONFIG_SYS_POST_I2C)
  58
  59 /*
  60  * LED support
  61  */
  62 #define USR_LED0        0x00000080
  63 #define USR_LED1        0x00000100
  64 #define USR_LED2        0x00000200
  65 #define USR_LED3        0x00000400
  66
  67 #ifndef __ASSEMBLY__
  68 extern unsigned long in32(unsigned int);
  69 extern void out32(unsigned int, unsigned long);
  70
  71 #define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
  72 #define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
  73 #define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
  74 #define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
  75
  76 #define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
  77 #define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
  78 #define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
  79 #define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
  80 #endif
  81
  82 /*
  83  * Use internal SRAM for initial stack
  84  */
  85 #define CONFIG_SYS_TEMP_STACK_OCM       1
  86 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_ISRAM_BASE
  87 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_ISRAM_BASE   /* Initial RAM address */
  88 #define CONFIG_SYS_INIT_RAM_SIZE                0x2000  /* Size of used area in RAM */
  89 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  90 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
  91
  92 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)    /* Reserve 512 KB for Mon */
  93 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
  94
  95 /*
  96  * Serial Port
  97  */
  98 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
  99 #define CONFIG_SYS_NS16550_SERIAL
 100 #define CONFIG_SYS_NS16550_REG_SIZE     1
 101 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 102
 103 #define CONFIG_SYS_BAUDRATE_TABLE \
 104         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
 105 #define CONFIG_BAUDRATE                 115200
 106 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 107 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 108
 109 /*
 110  * NOR flash configuration
 111  */
 112 #define CONFIG_SYS_MAX_FLASH_BANKS      3
 113 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
 114 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
 115 #define CONFIG_FLASH_CFI_DRIVER
 116 #define CONFIG_SYS_FLASH_CFI
 117 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 118 #define CONFIG_SYS_FLASH_QUIET_TEST             /* MirrorBit flashes are optional */
 119 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
 120 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
 121
 122 /*
 123  * I2C
 124  */
 125 #define CONFIG_SYS_I2C
 126 #define CONFIG_SYS_I2C_PPC4XX
 127 #define CONFIG_SYS_I2C_PPC4XX_CH0
 128 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 129 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0           0x7f
 130
 131 /* I2C EEPROM */
 132 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 133 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 134 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 135 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 136
 137 /* I2C RTC: STMicro M41T00 */
 138 #define CONFIG_RTC_M41T11               1
 139 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 140 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 141
 142 /*
 143  * PCI
 144  */
 145 /* General PCI */
 146 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 147 #define CONFIG_PCI_SCAN_SHOW                    /* show pci devices on startup */
 148 #define CONFIG_SYS_PCI_TARGBASE 0x80000000      /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 149
 150 /* Board-specific PCI */
 151 #define CONFIG_SYS_PCI_TARGET_INIT              /* let board init pci target */
 152 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014   /* IBM */
 153 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
 154 #define CONFIG_SYS_PCI_FORCE_PCI_CONV           /* Force PCI Conventional Mode */
 155
 156 /*
 157  * Networking options
 158  */
 159 #define CONFIG_PPC4xx_EMAC
 160 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 161 #define CONFIG_MII              1       /* MII PHY management */
 162 #define CONFIG_PHY_RESET        1       /* reset phy upon startup */
 163 #define CONFIG_SYS_RX_ETH_BUFFER 32     /* Number of ethernet rx buffers & descriptors */
 164 #define CONFIG_ETHPRIME         "ppc_4xx_eth2"
 165 #define CONFIG_PHY_ADDR         4       /* PHY address phy0 not populated */
 166 #define CONFIG_PHY2_ADDR        4       /* PHY address phy2 */
 167 #define CONFIG_HAS_ETH2         1       /* add support for "eth2addr" */
 168 #define CONFIG_PHY3_ADDR        8       /* PHY address phy3 */
 169 #define CONFIG_HAS_ETH3         1       /* add support for "eth3addr" */
 170
 171 /* BOOTP options */
 172 #define CONFIG_BOOTP_BOOTFILESIZE
 173 #define CONFIG_BOOTP_BOOTPATH
 174 #define CONFIG_BOOTP_GATEWAY
 175 #define CONFIG_BOOTP_HOSTNAME
 176
 177 /*
 178  * Command configuration
 179  */
 180 #define CONFIG_CMD_DATE
 181 #define CONFIG_CMD_EEPROM
 182 #define CONFIG_CMD_IRQ
 183 #define CONFIG_CMD_JFFS2
 184 #define CONFIG_CMD_PCI
 185
 186 /*
 187  * Miscellaneous configurable options
 188  */
 189 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 190 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 191 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 192 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 193 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 194 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 195 #define CONFIG_CMDLINE_EDITING  1               /* Command-line editing */
 196 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 197 #define CONFIG_PREBOOT                          /* enable preboot variable */
 198 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 199 #define CONFIG_SYS_EXTBDINFO    1               /* To use extended board_into (bd_t) */
 200
 201 /*
 202  * For booting Linux, the board info and command line data
 203  * have to be in the first 8 MB of memory, since this is
 204  * the maximum mapped by the Linux kernel during initialization.
 205  */
 206 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 207
 208 /*
 209  * Environment Configuration
 210  */
 211 #define CONFIG_ENV_IS_IN_FLASH  1
 212 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128k (one sector) for env */
 213 #define CONFIG_ENV_SIZE         0x8000
 214 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 215
 216 /*
 217  * Flash memory map:
 218  * fff80000 - ffffffff  U-Boot (512 KB)
 219  * fff40000 - fff7ffff  U-Boot Environment (256 KB)
 220  * fff00000 - fff3ffff  FDT (256KB)
 221  * ffc00000 - ffefffff  OS image (3MB)
 222  * ff000000 - ffbfffff  OS Use/Filesystem (12MB)
 223  */
 224
 225 #define CONFIG_UBOOT_ENV_ADDR   __stringify(CONFIG_SYS_TEXT_BASE)
 226 #define CONFIG_FDT_ENV_ADDR     __stringify(0xfff00000)
 227 #define CONFIG_OS_ENV_ADDR      __stringify(0xffc00000)
 228
 229 #define CONFIG_PROG_UBOOT                                               \
 230         "$download_cmd $loadaddr $ubootfile; "                          \
 231         "if test $? -eq 0; then "                                       \
 232                 "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; "          \
 233                 "erase "CONFIG_UBOOT_ENV_ADDR" +80000; "                \
 234                 "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; "        \
 235                 "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; "           \
 236                 "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; "       \
 237                 "if test $? -ne 0; then "                               \
 238                         "echo PROGRAM FAILED; "                         \
 239                 "else; "                                                \
 240                         "echo PROGRAM SUCCEEDED; "                      \
 241                 "fi; "                                                  \
 242         "else; "                                                        \
 243                 "echo DOWNLOAD FAILED; "                                \
 244         "fi;"
 245
 246 #define CONFIG_BOOT_OS_NET                                              \
 247         "$download_cmd $osaddr $osfile; "                               \
 248         "if test $? -eq 0; then "                                       \
 249                 "if test -n $fdtaddr; then "                            \
 250                         "$download_cmd $fdtaddr $fdtfile; "             \
 251                         "if test $? -eq 0; then "                       \
 252                                 "bootm $osaddr - $fdtaddr; "            \
 253                         "else; "                                        \
 254                                 "echo FDT DOWNLOAD FAILED; "            \
 255                         "fi; "                                          \
 256                 "else; "                                                \
 257                         "bootm $osaddr; "                               \
 258                 "fi; "                                                  \
 259         "else; "                                                        \
 260                 "echo OS DOWNLOAD FAILED; "                             \
 261         "fi;"
 262
 263 #define CONFIG_PROG_OS                                                  \
 264         "$download_cmd $osaddr $osfile; "                               \
 265         "if test $? -eq 0; then "                                       \
 266                 "erase "CONFIG_OS_ENV_ADDR" +$filesize; "               \
 267                 "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "         \
 268                 "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "        \
 269                 "if test $? -ne 0; then "                               \
 270                         "echo OS PROGRAM FAILED; "                      \
 271                 "else; "                                                \
 272                         "echo OS PROGRAM SUCCEEDED; "                   \
 273                 "fi; "                                                  \
 274         "else; "                                                        \
 275                 "echo OS DOWNLOAD FAILED; "                             \
 276         "fi;"
 277
 278 #define CONFIG_PROG_FDT                                                 \
 279         "$download_cmd $fdtaddr $fdtfile; "                             \
 280         "if test $? -eq 0; then "                                       \
 281                 "erase "CONFIG_FDT_ENV_ADDR" +$filesize;"               \
 282                 "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "       \
 283                 "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "      \
 284                 "if test $? -ne 0; then "                               \
 285                         "echo FDT PROGRAM FAILED; "                     \
 286                 "else; "                                                \
 287                         "echo FDT PROGRAM SUCCEEDED; "                  \
 288                 "fi; "                                                  \
 289         "else; "                                                        \
 290                 "echo FDT DOWNLOAD FAILED; "                            \
 291         "fi;"
 292
 293 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 294         "autoload=yes\0"                                                \
 295         "download_cmd=tftp\0"                                           \
 296         "console_args=console=ttyS0,115200\0"                           \
 297         "root_args=root=/dev/nfs rw\0"                                  \
 298         "misc_args=ip=on\0"                                             \
 299         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 300         "bootfile=/home/user/file\0"                                    \
 301         "osfile=/home/user/board.uImage\0"                              \
 302         "fdtfile=/home/user/board.dtb\0"                                \
 303         "ubootfile=/home/user/u-boot.bin\0"                             \
 304         "fdtaddr=0x1e00000\0"                                           \
 305         "osaddr=0x1000000\0"                                            \
 306         "loadaddr=0x1000000\0"                                          \
 307         "prog_uboot="CONFIG_PROG_UBOOT"\0"                              \
 308         "prog_os="CONFIG_PROG_OS"\0"                                    \
 309         "prog_fdt="CONFIG_PROG_FDT"\0"                                  \
 310         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 311         "bootcmd_flash=run set_bootargs; "                              \
 312                 "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0"  \
 313         "bootcmd=run bootcmd_flash\0"
 314 #endif  /* __CONFIG_H */