include/configs/xpedite1000.h

   1 /*
   2  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * config for XPedite1000 from XES Inc.
  25  * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
  26  * (C) Copyright 2003 Sandburst Corporation
  27  * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 /* High Level Configuration Options */
  34 #define CONFIG_XPEDITE1000      1
  35 #define CONFIG_SYS_BOARD_NAME   "XPedite1000"
  36 #define CONFIG_SYS_FORM_PMC     1
  37 #define CONFIG_4xx              1               /* ... PPC4xx family */
  38 #define CONFIG_440              1
  39 #define CONFIG_440GX            1               /* 440 GX */
  40 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_pre_init  */
  41 #define CONFIG_SYS_CLK_FREQ     33333333        /* external freq to pll */
  42
  43 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  44
  45 /*
  46  * DDR config
  47  */
  48 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup */
  49 #define SPD_EEPROM_ADDRESS      {0x54}  /* SPD i2c spd addresses */
  50 #define CONFIG_VERY_BIG_RAM     1
  51
  52 /*
  53  * Base addresses -- Note these are effective addresses where the
  54  * actual resources get mapped (not physical addresses)
  55  */
  56 #define CONFIG_SYS_SDRAM_BASE           0x00000000
  57 #define CONFIG_SYS_FLASH_BASE           0xff000000      /* start of FLASH */
  58 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
  59 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped pci memory */
  60 #define CONFIG_SYS_ISRAM_BASE           0xc0000000      /* internal SRAM */
  61 #define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs */
  62 #define CONFIG_SYS_NVRAM_BASE_ADDR      (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
  63 #define CONFIG_SYS_GPIO_BASE            (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
  64
  65 /*
  66  * Diagnostics
  67  */
  68 #define CONFIG_SYS_ALT_MEMTEST
  69 #define CONFIG_SYS_MEMTEST_START        0x0400000
  70 #define CONFIG_SYS_MEMTEST_END          0x0C00000
  71
  72 /* POST support */
  73 #define CONFIG_POST             (CONFIG_SYS_POST_RTC    | \
  74                                  CONFIG_SYS_POST_I2C)
  75
  76 /*
  77  * LED support
  78  */
  79 #define USR_LED0        0x00000080
  80 #define USR_LED1        0x00000100
  81 #define USR_LED2        0x00000200
  82 #define USR_LED3        0x00000400
  83
  84 #ifndef __ASSEMBLY__
  85 extern unsigned long in32(unsigned int);
  86 extern void out32(unsigned int, unsigned long);
  87
  88 #define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
  89 #define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
  90 #define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
  91 #define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
  92
  93 #define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
  94 #define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
  95 #define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
  96 #define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
  97 #endif
  98
  99 /*
 100  * Use internal SRAM for initial stack
 101  */
 102 #define CONFIG_SYS_TEMP_STACK_OCM       1
 103 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_ISRAM_BASE
 104 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_ISRAM_BASE   /* Initial RAM address */
 105 #define CONFIG_SYS_INIT_RAM_SIZE                0x2000  /* Size of used area in RAM */
 106 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 107 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 108
 109 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)    /* Reserve 512 KB for Mon */
 110 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 111
 112 /*
 113  * Serial Port
 114  */
 115 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 116 #define CONFIG_SYS_NS16550
 117 #define CONFIG_SYS_NS16550_SERIAL
 118 #define CONFIG_SYS_NS16550_REG_SIZE     1
 119 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 120
 121 #define CONFIG_SYS_BAUDRATE_TABLE \
 122         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
 123 #define CONFIG_BAUDRATE                 115200
 124 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 125 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 126
 127 /*
 128  * Use the HUSH parser
 129  */
 130 #define CONFIG_SYS_HUSH_PARSER
 131
 132 /*
 133  * NOR flash configuration
 134  */
 135 #define CONFIG_SYS_MAX_FLASH_BANKS      3
 136 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
 137 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
 138 #define CONFIG_FLASH_CFI_DRIVER
 139 #define CONFIG_SYS_FLASH_CFI
 140 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 141 #define CONFIG_SYS_FLASH_QUIET_TEST             /* MirrorBit flashes are optional */
 142 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
 143 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
 144
 145 /*
 146  * I2C
 147  */
 148 #define CONFIG_HARD_I2C                 1       /* I2C with hardware support */
 149 #define CONFIG_PPC4XX_I2C               /* use PPC4xx driver            */
 150 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 151 #define CONFIG_SYS_I2C_SLAVE            0x7f
 152 #define CONFIG_I2C_MULTI_BUS
 153
 154 /* I2C EEPROM */
 155 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 156 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 157 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 158 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 159
 160 /* I2C RTC: STMicro M41T00 */
 161 #define CONFIG_RTC_M41T11               1
 162 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 163 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 164
 165 /*
 166  * PCI
 167  */
 168 /* General PCI */
 169 #define CONFIG_PCI                              /* include pci support */
 170 #define CONFIG_PCI_PNP                          /* do pci plug-and-play */
 171 #define CONFIG_PCI_SCAN_SHOW                    /* show pci devices on startup */
 172 #define CONFIG_SYS_PCI_TARGBASE 0x80000000      /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 173
 174 /* Board-specific PCI */
 175 #define CONFIG_SYS_PCI_TARGET_INIT              /* let board init pci target */
 176 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014   /* IBM */
 177 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
 178 #define CONFIG_SYS_PCI_FORCE_PCI_CONV           /* Force PCI Conventional Mode */
 179
 180 /*
 181  * Networking options
 182  */
 183 #define CONFIG_PPC4xx_EMAC
 184 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 185 #define CONFIG_MII              1       /* MII PHY management */
 186 #define CONFIG_PHY_RESET        1       /* reset phy upon startup */
 187 #define CONFIG_SYS_RX_ETH_BUFFER 32     /* Number of ethernet rx buffers & descriptors */
 188 #define CONFIG_ETHPRIME         "ppc_4xx_eth2"
 189 #define CONFIG_PHY_ADDR         4       /* PHY address phy0 not populated */
 190 #define CONFIG_PHY2_ADDR        4       /* PHY address phy2 */
 191 #define CONFIG_HAS_ETH2         1       /* add support for "eth2addr" */
 192 #define CONFIG_PHY3_ADDR        8       /* PHY address phy3 */
 193 #define CONFIG_HAS_ETH3         1       /* add support for "eth3addr" */
 194
 195 /* BOOTP options */
 196 #define CONFIG_BOOTP_BOOTFILESIZE
 197 #define CONFIG_BOOTP_BOOTPATH
 198 #define CONFIG_BOOTP_GATEWAY
 199 #define CONFIG_BOOTP_HOSTNAME
 200
 201 /*
 202  * Command configuration
 203  */
 204 #include <config_cmd_default.h>
 205
 206 #define CONFIG_CMD_ASKENV
 207 #define CONFIG_CMD_DATE
 208 #define CONFIG_CMD_DHCP
 209 #define CONFIG_CMD_EEPROM
 210 #define CONFIG_CMD_ELF
 211 #define CONFIG_CMD_FLASH
 212 #define CONFIG_CMD_I2C
 213 #define CONFIG_CMD_IRQ
 214 #define CONFIG_CMD_JFFS2
 215 #define CONFIG_CMD_MII
 216 #define CONFIG_CMD_NET
 217 #define CONFIG_CMD_PCI
 218 #define CONFIG_CMD_PING
 219 #define CONFIG_CMD_SAVEENV
 220 #define CONFIG_CMD_SNTP
 221
 222 /*
 223  * Miscellaneous configurable options
 224  */
 225 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 226 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 227 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 228 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 229 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 230 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 231 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 232 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 233 #define CONFIG_CMDLINE_EDITING  1               /* Command-line editing */
 234 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
 235 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 236 #define CONFIG_PREBOOT                          /* enable preboot variable */
 237 #define CONFIG_FIT              1
 238 #define CONFIG_FIT_VERBOSE      1
 239 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 240 #define CONFIG_SYS_EXTBDINFO    1               /* To use extended board_into (bd_t) */
 241
 242 /*
 243  * For booting Linux, the board info and command line data
 244  * have to be in the first 8 MB of memory, since this is
 245  * the maximum mapped by the Linux kernel during initialization.
 246  */
 247 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 248
 249 /*
 250  * Environment Configuration
 251  */
 252 #define CONFIG_ENV_IS_IN_FLASH  1
 253 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128k (one sector) for env */
 254 #define CONFIG_ENV_SIZE         0x8000
 255 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 256
 257 /*
 258  * Flash memory map:
 259  * fff80000 - ffffffff  U-Boot (512 KB)
 260  * fff40000 - fff7ffff  U-Boot Environment (256 KB)
 261  * fff00000 - fff3ffff  FDT (256KB)
 262  * ffc00000 - ffefffff  OS image (3MB)
 263  * ff000000 - ffbfffff  OS Use/Filesystem (12MB)
 264  */
 265
 266 #define CONFIG_UBOOT_ENV_ADDR   __stringify(CONFIG_SYS_TEXT_BASE)
 267 #define CONFIG_FDT_ENV_ADDR     __stringify(0xfff00000)
 268 #define CONFIG_OS_ENV_ADDR      __stringify(0xffc00000)
 269
 270 #define CONFIG_PROG_UBOOT                                               \
 271         "$download_cmd $loadaddr $ubootfile; "                          \
 272         "if test $? -eq 0; then "                                       \
 273                 "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; "          \
 274                 "erase "CONFIG_UBOOT_ENV_ADDR" +80000; "                \
 275                 "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; "        \
 276                 "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; "           \
 277                 "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; "       \
 278                 "if test $? -ne 0; then "                               \
 279                         "echo PROGRAM FAILED; "                         \
 280                 "else; "                                                \
 281                         "echo PROGRAM SUCCEEDED; "                      \
 282                 "fi; "                                                  \
 283         "else; "                                                        \
 284                 "echo DOWNLOAD FAILED; "                                \
 285         "fi;"
 286
 287 #define CONFIG_BOOT_OS_NET                                              \
 288         "$download_cmd $osaddr $osfile; "                               \
 289         "if test $? -eq 0; then "                                       \
 290                 "if test -n $fdtaddr; then "                            \
 291                         "$download_cmd $fdtaddr $fdtfile; "             \
 292                         "if test $? -eq 0; then "                       \
 293                                 "bootm $osaddr - $fdtaddr; "            \
 294                         "else; "                                        \
 295                                 "echo FDT DOWNLOAD FAILED; "            \
 296                         "fi; "                                          \
 297                 "else; "                                                \
 298                         "bootm $osaddr; "                               \
 299                 "fi; "                                                  \
 300         "else; "                                                        \
 301                 "echo OS DOWNLOAD FAILED; "                             \
 302         "fi;"
 303
 304 #define CONFIG_PROG_OS                                                  \
 305         "$download_cmd $osaddr $osfile; "                               \
 306         "if test $? -eq 0; then "                                       \
 307                 "erase "CONFIG_OS_ENV_ADDR" +$filesize; "               \
 308                 "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "         \
 309                 "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "        \
 310                 "if test $? -ne 0; then "                               \
 311                         "echo OS PROGRAM FAILED; "                      \
 312                 "else; "                                                \
 313                         "echo OS PROGRAM SUCCEEDED; "                   \
 314                 "fi; "                                                  \
 315         "else; "                                                        \
 316                 "echo OS DOWNLOAD FAILED; "                             \
 317         "fi;"
 318
 319 #define CONFIG_PROG_FDT                                                 \
 320         "$download_cmd $fdtaddr $fdtfile; "                             \
 321         "if test $? -eq 0; then "                                       \
 322                 "erase "CONFIG_FDT_ENV_ADDR" +$filesize;"               \
 323                 "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "       \
 324                 "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "      \
 325                 "if test $? -ne 0; then "                               \
 326                         "echo FDT PROGRAM FAILED; "                     \
 327                 "else; "                                                \
 328                         "echo FDT PROGRAM SUCCEEDED; "                  \
 329                 "fi; "                                                  \
 330         "else; "                                                        \
 331                 "echo FDT DOWNLOAD FAILED; "                            \
 332         "fi;"
 333
 334 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 335         "autoload=yes\0"                                                \
 336         "download_cmd=tftp\0"                                           \
 337         "console_args=console=ttyS0,115200\0"                           \
 338         "root_args=root=/dev/nfs rw\0"                                  \
 339         "misc_args=ip=on\0"                                             \
 340         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 341         "bootfile=/home/user/file\0"                                    \
 342         "osfile=/home/user/board.uImage\0"                              \
 343         "fdtfile=/home/user/board.dtb\0"                                \
 344         "ubootfile=/home/user/u-boot.bin\0"                             \
 345         "fdtaddr=c00000\0"                                              \
 346         "osaddr=0x1000000\0"                                            \
 347         "loadaddr=0x1000000\0"                                          \
 348         "prog_uboot="CONFIG_PROG_UBOOT"\0"                              \
 349         "prog_os="CONFIG_PROG_OS"\0"                                    \
 350         "prog_fdt="CONFIG_PROG_FDT"\0"                                  \
 351         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 352         "bootcmd_flash=run set_bootargs; "                              \
 353                 "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0"  \
 354         "bootcmd=run bootcmd_flash\0"
 355 #endif  /* __CONFIG_H */