include/configs/xea.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2019 DENX Software Engineering
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  *
   6  * Copyright (C) 2018 DENX Software Engineering
   7  * Måns Rullgård, DENX Software Engineering, mans@mansr.com
   8  *
   9  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  10  * on behalf of DENX Software Engineering GmbH
  11  */
  12 #ifndef __CONFIGS_XEA_H__
  13 #define __CONFIGS_XEA_H__
  14
  15 #include <linux/sizes.h>
  16
  17 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  18
  19 /* SPL */
  20 #define CONFIG_SPL_STACK                0x20000
  21
  22 #define CONFIG_SYS_SPL_ARGS_ADDR        0x44000000
  23
  24 #define CONFIG_SYS_SPI_KERNEL_OFFS      SZ_1M
  25 #define CONFIG_SYS_SPI_ARGS_OFFS        SZ_512K
  26 #define CONFIG_SYS_SPI_ARGS_SIZE        SZ_32K
  27
  28 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   (SZ_512K / 0x200)
  29 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (SZ_32K / 0x200)
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (SZ_1M / 0x200)
  31
  32 #ifndef CONFIG_SPL_BUILD
  33 #define CONFIG_SPI_FLASH_MTD
  34 #endif
  35
  36 /* Memory configuration */
  37 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  38 #define PHYS_SDRAM_1_SIZE               0x10000000      /* Max 256 MB RAM */
  39 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  40
  41 /* Environment */
  42
  43 /* Booting Linux */
  44 #define CONFIG_BOOTFILE         "uImage"
  45 #define CONFIG_BOOTCOMMAND      "run ${bootpri} ; run ${bootsec}"
  46 #define CONFIG_LOADADDR         0x42000000
  47 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  48
  49 /* Extra Environment */
  50 #define CONFIG_PREBOOT          "run prebootcmd"
  51 #define CONFIG_HOSTNAME         "xea"
  52
  53 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  54         "bootmode=update\0"                                             \
  55         "bootpri=mmc_mmc\0"                                             \
  56         "bootsec=sf_swu\0"                                              \
  57         "consdev=ttyAMA0\0"                                             \
  58         "baudrate=115200\0"                                             \
  59         "dtbaddr=0x44000000\0"                                          \
  60         "dtbfile=imx28-xea.dtb\0"                                       \
  61         "rootdev=/dev/mmcblk0p2\0"                                      \
  62         "netdev=eth0\0"                                                 \
  63         "rdaddr=0x43000000\0"                                           \
  64         "swufile=swupdate.img\0"                                        \
  65         "sf_kernel_offset=0x100000\0"                                   \
  66         "sf_kernel_size=0x400000\0"                                     \
  67         "sf_swu_offset=0x500000\0"                                      \
  68         "sf_swu_size=0x800000\0"                                        \
  69         "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0"               \
  70         "do_update_mmc="                                                \
  71                 "if mmc rescan ; then "                                 \
  72                 "mmc dev 0 ${update_mmc_part} ; "                       \
  73                 "if dhcp ${hostname}/${update_filename} ; then "        \
  74                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  75                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
  76                 "mmc write ${loadaddr} ${update_offset} ${fw_sz} ; "    \
  77                 "fi ; "                                                 \
  78                 "fi\0"                                                  \
  79         "do_update_sf="                                                 \
  80                 "if sf probe ; then "                                   \
  81                 "if dhcp ${hostname}/${update_filename} ; then "        \
  82                 "sf erase ${update_offset} +${filesize} ; "             \
  83                 "sf write ${loadaddr} ${update_offset} ${filesize} ; "  \
  84                 "fi ; "                                                 \
  85                 "fi\0"                                                  \
  86         "update_spl_filename=u-boot.sb\0"                               \
  87         "update_spl="                                                   \
  88                 "setenv update_filename ${update_spl_filename} ; "      \
  89                 "setenv update_offset 0 ; "                             \
  90                 "run do_update_sf\0"                                    \
  91         "update_uboot_filename=u-boot.img\0"                            \
  92         "update_uboot="                                                 \
  93                 "setenv update_filename ${update_uboot_filename} ; "    \
  94                 "setenv update_offset 0x10000 ; "                       \
  95                 "run do_update_sf ; "                                   \
  96                 "setenv update_mmc_part 1 ; "                           \
  97                 "setenv update_offset 0 ; "                             \
  98                 "run do_update_mmc\0"                                   \
  99         "update_kernel_filename=uImage\0"                               \
 100         "update_kernel="                                                \
 101                 "setenv update_mmc_part 1 ; "                           \
 102                 "setenv update_filename ${update_kernel_filename} ; "   \
 103                 "setenv update_offset 0x800 ; "                         \
 104                 "run do_update_mmc ; "                                  \
 105                 "setenv update_filename ${dtbfile} ; "                  \
 106                 "setenv update_offset 0x400 ; "                         \
 107                 "run do_update_mmc\0"                                   \
 108         "update_sfkernel="                                              \
 109                 "setenv update_filename fitImage ; "                    \
 110                 "setenv update_offset ${sf_kernel_offset} ; "           \
 111                 "run do_update_sf\0"                                    \
 112         "update_swu="                                                   \
 113                 "setenv update_filename ${swufile} ; "                  \
 114                 "setenv update_offset ${sf_swu_offset} ; "              \
 115                 "run do_update_sf\0"                                    \
 116         "addcons="                                                      \
 117                 "setenv bootargs ${bootargs} "                          \
 118                 "console=${consdev},${baudrate}\0"                      \
 119         "addip="                                                        \
 120                 "setenv bootargs ${bootargs} "                          \
 121                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 122                         "${netmask}:${hostname}:${netdev}:off\0"        \
 123         "addmisc="                                                      \
 124                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 125         "addargs=run addcons addmisc\0"                                 \
 126         "mmcload="                                                      \
 127                 "mmc rescan ; "                                         \
 128                 "mmc dev 0 1 ; "                                        \
 129                 "mmc read ${loadaddr} 0x800 0x2000 ; "                  \
 130                 "mmc read ${dtbaddr} 0x400 0x80\0"                      \
 131         "netload="                                                      \
 132                 "dhcp ${loadaddr} ${hostname}/${bootfile} ; "           \
 133                 "tftp ${dtbaddr} ${hostname}/${dtbfile}\0"              \
 134         "sfload="                                                       \
 135                 "sf probe ; "                                           \
 136                 "sf read ${loadaddr} ${sf_kernel_offset} ${sf_kernel_size}\0" \
 137         "usbload="                                                      \
 138                 "usb start ; "                                          \
 139                 "load usb 0:1 ${loadaddr} ${bootfile}\0"                \
 140         "miscargs=panic=1\0"                                            \
 141         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 142         "nfsargs="                                                      \
 143                 "setenv bootargs root=/dev/nfs rw "                     \
 144                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 145         "mmc_mmc="                                                      \
 146                 "if run mmcload mmcargs addargs ; then "                \
 147                 "bootm ${loadaddr} - ${dtbaddr} ; "                     \
 148                 "fi\0"                                                  \
 149         "mmc_nfs="                                                      \
 150                 "if run mmcload nfsargs addip addargs ; then "          \
 151                 "bootm ${loadaddr} - ${dtbaddr} ; "                     \
 152                 "fi\0"                                                  \
 153         "sf_mmc="                                                       \
 154                 "if run sfload mmcargs addargs ; then "                 \
 155                 "bootm ${loadaddr} - ${dtbaddr} ; "                     \
 156                 "fi\0"                                                  \
 157         "sf_swu="                                                       \
 158                 "if run sfload ; then "                                 \
 159                 "sf read ${rdaddr} ${sf_swu_offset} ${sf_swu_size} ; "  \
 160                 "setenv bootargs root=/dev/ram0 rw ; "                  \
 161                 "run addargs ; "                                        \
 162                 "bootm ${loadaddr} ${rdaddr} ; "                \
 163                 "fi\0"                                                  \
 164         "net_mmc="                                                      \
 165                 "if run netload mmcargs addargs ; then "                \
 166                 "bootm ${loadaddr} - ${dtbaddr} ; "                     \
 167                 "fi\0"                                                  \
 168         "net_nfs="                                                      \
 169                 "if run netload nfsargs addip addargs ; then "          \
 170                 "bootm ${loadaddr} - ${dtbaddr} ; "                     \
 171                 "fi\0"                                                  \
 172         "prebootcmd="                                                   \
 173                 "if test \"${envsaved}\" != y ; then ; "                \
 174                 "setenv envsaved y ; "                                  \
 175                 "saveenv ; "                                            \
 176                 "fi ; "                                                 \
 177                 "if test \"${bootmode}\" = normal ; then "              \
 178                 "setenv bootdelay 0 ; "                                 \
 179                 "setenv bootpri mmc_mmc ; "                             \
 180                 "elif test \"${bootmode}\" = devel ; then "             \
 181                 "setenv bootdelay 3 ; "                                 \
 182                 "setenv bootpri net_mmc ; "                             \
 183                 "else "                                                 \
 184                 "if test \"${bootmode}\" != update ; then "             \
 185                 "echo Warning: unknown bootmode \"${bootmode}\" ; "     \
 186                 "fi ; "                                                 \
 187                 "setenv bootdelay 1 ; "                                 \
 188                 "setenv bootpri sf_swu ; "                              \
 189                 "fi\0"
 190
 191 /* The rest of the configuration is shared */
 192 #include <configs/mxs.h>
 193
 194 #endif /* __CONFIGS_XEA_H__ */