configs: Re-sync almost all of cmd/Kconfig
[platform/kernel/u-boot.git] / include / configs / x600.h
1 /*
2  * (C) Copyright 2009
3  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
4  *
5  * Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 /*
14  * High Level Configuration Options
15  * (easy to change)
16  */
17 #define CONFIG_SPEAR600                         /* SPEAr600 SoC */
18 #define CONFIG_X600                             /* on X600 board */
19 #define CONFIG_SYS_THUMB_BUILD
20
21 #include <asm/arch/hardware.h>
22
23 /* Timer, HZ specific defines */
24 #define CONFIG_SYS_HZ_CLOCK                     8300000
25
26 #define CONFIG_SYS_TEXT_BASE                    0x00800040
27 #define CONFIG_SYS_FLASH_BASE                   0xf8000000
28 /* Reserve 8KiB for SPL */
29 #define CONFIG_SPL_PAD_TO                       8192    /* decimal for 'dd' */
30 #define CONFIG_SYS_SPL_LEN                      CONFIG_SPL_PAD_TO
31 #define CONFIG_SYS_UBOOT_BASE                   (CONFIG_SYS_FLASH_BASE + \
32                                                  CONFIG_SYS_SPL_LEN)
33 #define CONFIG_SYS_UBOOT_START                  CONFIG_SYS_TEXT_BASE
34 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_FLASH_BASE
35 #define CONFIG_SYS_MONITOR_LEN                  0x60000
36
37 #define CONFIG_ENV_IS_IN_FLASH
38
39 /* Serial Configuration (PL011) */
40 #define CONFIG_SYS_SERIAL0                      0xD0000000
41 #define CONFIG_SYS_SERIAL1                      0xD0080000
42 #define CONFIG_PL01x_PORTS                      { (void *)CONFIG_SYS_SERIAL0, \
43                                                 (void *)CONFIG_SYS_SERIAL1 }
44 #define CONFIG_PL011_SERIAL
45 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
46 #define CONFIG_CONS_INDEX                       0
47 #define CONFIG_BAUDRATE                         115200
48 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
49                                                   57600, 115200 }
50 #define CONFIG_SYS_LOADS_BAUD_CHANGE
51
52 /* NOR FLASH config options */
53 #define CONFIG_ST_SMI
54 #define CONFIG_SYS_MAX_FLASH_BANKS              1
55 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
56 #define CONFIG_SYS_FLASH_ADDR_BASE              { CONFIG_SYS_FLASH_BASE }
57 #define CONFIG_SYS_MAX_FLASH_SECT               128
58 #define CONFIG_SYS_FLASH_EMPTY_INFO
59 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
60 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
61
62 /* NAND FLASH config options */
63 #define CONFIG_NAND_FSMC
64 #define CONFIG_SYS_NAND_SELF_INIT
65 #define CONFIG_SYS_MAX_NAND_DEVICE              1
66 #define CONFIG_SYS_NAND_BASE                    CONFIG_FSMC_NAND_BASE
67 #define CONFIG_MTD_ECC_SOFT
68 #define CONFIG_SYS_FSMC_NAND_8BIT
69 #define CONFIG_SYS_NAND_ONFI_DETECTION
70 #define CONFIG_NAND_ECC_BCH
71 #define CONFIG_BCH
72
73 /* UBI/UBI config options */
74 #define CONFIG_MTD_DEVICE
75 #define CONFIG_MTD_PARTITIONS
76 #define CONFIG_RBTREE
77
78 /* Ethernet config options */
79 #define CONFIG_MII
80 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
81 #define CONFIG_PHY_ADDR         0       /* PHY address */
82 #define CONFIG_PHY_GIGE                 /* Include GbE speed/duplex detection */
83
84 #define CONFIG_SPEAR_GPIO
85
86 /* I2C config options */
87 #define CONFIG_SYS_I2C
88 #define CONFIG_SYS_I2C_DW
89 #define CONFIG_SYS_I2C_BASE                     0xD0200000
90 #define CONFIG_SYS_I2C_SPEED                    400000
91 #define CONFIG_SYS_I2C_SLAVE                    0x02
92 #define CONFIG_I2C_CHIPADDRESS                  0x50
93
94 #define CONFIG_RTC_M41T62       1
95 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
96
97 /* FPGA config options */
98 #define CONFIG_FPGA
99 #define CONFIG_FPGA_XILINX
100 #define CONFIG_FPGA_SPARTAN3
101 #define CONFIG_FPGA_COUNT       1
102
103 /* USB EHCI options */
104 #define CONFIG_USB_EHCI
105 #define CONFIG_USB_EHCI_SPEAR
106 #define CONFIG_USB_STORAGE
107 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
108
109 /*
110  * Command support defines
111  */
112 #define CONFIG_CMD_CACHE
113 #define CONFIG_CMD_DATE
114 #define CONFIG_CMD_ENV
115 #define CONFIG_CMD_FAT
116 #define CONFIG_CMD_FPGA_LOADMK
117 #define CONFIG_CMD_FS_GENERIC
118 #define CONFIG_CMD_MII
119 #define CONFIG_CMD_MTDPARTS
120 #define CONFIG_CMD_NAND
121 #define CONFIG_CMD_SAVES
122 #define CONFIG_CMD_UBI
123 #define CONFIG_CMD_UBIFS
124 #define CONFIG_LZO
125
126 /* Filesystem support (for USB key) */
127 #define CONFIG_SUPPORT_VFAT
128 #define CONFIG_DOS_PARTITION
129
130 #define CONFIG_BOOTDELAY                        3
131
132
133 /*
134  * U-Boot Environment placing definitions.
135  */
136 #define CONFIG_ENV_SECT_SIZE                    0x00010000
137 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_MONITOR_BASE + \
138                                                  CONFIG_SYS_MONITOR_LEN)
139 #define CONFIG_ENV_SIZE                         0x02000
140 #define CONFIG_ENV_ADDR_REDUND                  (CONFIG_ENV_ADDR + \
141                                                  CONFIG_ENV_SECT_SIZE)
142 #define CONFIG_ENV_SIZE_REDUND                  (CONFIG_ENV_SIZE)
143
144 /* Miscellaneous configurable options */
145 #define CONFIG_ARCH_CPU_INIT
146 #define CONFIG_DISPLAY_CPUINFO
147 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
148 #define CONFIG_CMDLINE_TAG
149 #define CONFIG_SETUP_MEMORY_TAGS
150 #define CONFIG_MISC_INIT_R
151 #define CONFIG_BOARD_LATE_INIT
152 #define CONFIG_MX_CYCLIC                /* enable mdc/mwc commands      */
153 #define CONFIG_ZERO_BOOTDELAY_CHECK
154
155 #define CONFIG_SYS_MEMTEST_START                0x00800000
156 #define CONFIG_SYS_MEMTEST_END                  0x04000000
157 #define CONFIG_SYS_MALLOC_LEN                   (8 << 20)
158 #define CONFIG_IDENT_STRING                     "-SPEAr"
159 #define CONFIG_SYS_LONGHELP
160 #define CONFIG_CMDLINE_EDITING
161 #define CONFIG_AUTO_COMPLETE
162 #define CONFIG_SYS_CBSIZE                       256
163 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
164                                                  sizeof(CONFIG_SYS_PROMPT) + 16)
165 #define CONFIG_SYS_MAXARGS                      16
166 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
167 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
168 #define CONFIG_SYS_CONSOLE_INFO_QUIET
169
170 /* Use last 2 lwords in internal SRAM for bootcounter */
171 #define CONFIG_BOOTCOUNT_LIMIT
172 #define CONFIG_SYS_BOOTCOUNT_ADDR               (CONFIG_SRAM_BASE + \
173                                                  CONFIG_SRAM_SIZE)
174
175 #define CONFIG_HOSTNAME                         x600
176 #define CONFIG_UBI_PART                         ubi0
177 #define CONFIG_UBIFS_VOLUME                     rootfs
178
179 #define MTDIDS_DEFAULT          "nand0=nand"
180 #define MTDPARTS_DEFAULT        "mtdparts=nand:64M(ubi0),64M(ubi1)"
181
182 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
183         "u-boot_addr=1000000\0"                                         \
184         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0"          \
185         "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
186         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
187                 " +${filesize};"                                        \
188                 "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
189                 "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
190                 " ${filesize};"                                         \
191                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
192                 " +${filesize}\0"                                       \
193         "upd=run load update\0"                                         \
194         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
195         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
196         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
197         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
198         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
199                 " ${filesize}\0"                                        \
200         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
201         "init_ubifs=nand erase.part ubi0;ubi part ${part};"             \
202                 "ubi create ${vol} 4000000\0"                           \
203         "netdev=eth0\0"                                                 \
204         "rootpath=/opt/eldk-4.2/arm\0"                                  \
205         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
206                 "nfsroot=${serverip}:${rootpath}\0"                     \
207         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
208         "boot_part=0\0"                                                 \
209         "altbootcmd=if test $boot_part -eq 0;then "                     \
210                         "echo Switching to partition 1!;"               \
211                         "setenv boot_part 1;"                           \
212                 "else; "                                                \
213                         "echo Switching to partition 0!;"               \
214                         "setenv boot_part 0;"                           \
215                 "fi;"                                                   \
216                 "saveenv;boot\0"                                        \
217         "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "               \
218                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
219         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
220         "kernel_fs=/boot/uImage \0"                                     \
221         "kernel_addr=1000000\0"                                         \
222         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
223                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
224         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
225         "dtb_addr=1800000\0"                                            \
226         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
227         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
228         "addip=setenv bootargs ${bootargs} "                            \
229                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
230                 ":${hostname}:${netdev}:off panic=1\0"                  \
231         "addcon=setenv bootargs ${bootargs} console=ttyAMA0,"           \
232                 "${baudrate}\0"                                         \
233         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
234         "net_nfs=run load_dtb load_kernel; "                            \
235                 "run nfsargs addip addcon addmtd addmisc;"              \
236                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
237         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
238         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
239         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
240                 " addcon addmisc addmtd;"                               \
241                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
242         "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0"  \
243         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
244                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
245         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
246                 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0"   \
247         "bootcmd=run nand_ubifs\0"                                      \
248         "\0"
249
250 /* Physical Memory Map */
251 #define CONFIG_NR_DRAM_BANKS                    1
252 #define PHYS_SDRAM_1                            0x00000000
253 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
254
255 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
256 #define CONFIG_SRAM_BASE                        0xd2800000
257 /* Preserve the last 2 lwords for the boot-counter */
258 #define CONFIG_SRAM_SIZE                        ((8 << 10) - 0x8)
259 #define CONFIG_SYS_INIT_RAM_ADDR                CONFIG_SRAM_BASE
260 #define CONFIG_SYS_INIT_RAM_SIZE                CONFIG_SRAM_SIZE
261
262 #define CONFIG_SYS_INIT_SP_OFFSET               \
263         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
264
265 #define CONFIG_SYS_INIT_SP_ADDR                 \
266         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
267
268 /*
269  * SPL related defines
270  */
271 #define CONFIG_SPL_TEXT_BASE            0xd2800b00
272 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SRAM_SIZE - 0xb00)
273 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
274 #define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
275
276 #define CONFIG_SPL_FRAMEWORK
277 #define CONFIG_SPL_NOR_SUPPORT
278 #define CONFIG_SPL_SERIAL_SUPPORT
279 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* image.c */
280 #define CONFIG_SPL_LIBGENERIC_SUPPORT   /* string.c */
281
282 /*
283  * Please select/define only one of the following
284  * Each definition corresponds to a supported DDR chip.
285  * DDR configuration is based on the following selection
286  */
287 #define CONFIG_DDR_MT47H64M16           1
288 #define CONFIG_DDR_MT47H32M16           0
289 #define CONFIG_DDR_MT47H128M8           0
290
291 /*
292  * Synchronous/Asynchronous operation of DDR
293  *
294  * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
295  * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
296  * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
297  */
298 #define CONFIG_DDR_2HCLK                1
299 #define CONFIG_DDR_HCLK                 0
300 #define CONFIG_DDR_PLL2                 0
301
302 /*
303  * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
304  * or not. Modify/Add to only these macros to define new boot types
305  */
306 #define USB_BOOT_SUPPORTED              0
307 #define PCIE_BOOT_SUPPORTED             0
308 #define SNOR_BOOT_SUPPORTED             1
309 #define NAND_BOOT_SUPPORTED             1
310 #define PNOR_BOOT_SUPPORTED             0
311 #define TFTP_BOOT_SUPPORTED             0
312 #define UART_BOOT_SUPPORTED             0
313 #define SPI_BOOT_SUPPORTED              0
314 #define I2C_BOOT_SUPPORTED              0
315 #define MMC_BOOT_SUPPORTED              0
316
317 #endif  /* __CONFIG_H */