Merge branch 'master' of git://www.denx.de/git/u-boot-imx
[platform/kernel/u-boot.git] / include / configs / woodburn_common.h
1 /*
2  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
3  *
4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
5  *
6  * Configuration for the woodburn board.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __WOODBURN_COMMON_CONFIG_H
12 #define __WOODBURN_COMMON_CONFIG_H
13
14 #include <asm/arch/imx-regs.h>
15
16  /* High Level Configuration Options */
17 #define CONFIG_ARM1136  /* This is an arm1136 CPU core */
18 #define CONFIG_MX35
19 #define CONFIG_MX35_HCLK_FREQ   24000000
20
21 #define CONFIG_SYS_DCACHE_OFF
22 #define CONFIG_SYS_CACHELINE_SIZE       32
23
24 #define CONFIG_DISPLAY_CPUINFO
25
26 /* Only in case the value is not present in mach-types.h */
27 #ifndef MACH_TYPE_FLEA3
28 #define MACH_TYPE_FLEA3                3668
29 #endif
30
31 #define CONFIG_MACH_TYPE                MACH_TYPE_FLEA3
32
33 /* This is required to setup the ESDC controller */
34
35 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
36 #define CONFIG_REVISION_TAG
37 #define CONFIG_SETUP_MEMORY_TAGS
38 #define CONFIG_INITRD_TAG
39
40 /*
41  * Size of malloc() pool
42  */
43 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
44
45 /*
46  * Hardware drivers
47  */
48 #define CONFIG_SYS_I2C
49 #define CONFIG_SYS_I2C_MXC
50 #define CONFIG_SYS_SPD_BUS_NUM          0
51 #define CONFIG_MXC_SPI
52 #define CONFIG_MXC_GPIO
53
54 /* PMIC Controller */
55 #define CONFIG_POWER
56 #define CONFIG_POWER_I2C
57 #define CONFIG_POWER_FSL
58 #define CONFIG_POWER_FSL_MC13892
59 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
60 #define CONFIG_RTC_MC13XXX
61
62
63 /* mmc driver */
64 #define CONFIG_MMC
65 #define CONFIG_GENERIC_MMC
66 #define CONFIG_FSL_ESDHC
67 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
68 #define CONFIG_SYS_FSL_ESDHC_NUM        1
69
70 /*
71  * UART (console)
72  */
73 #define CONFIG_MXC_UART
74 #define CONFIG_MXC_UART_BASE    UART1_BASE
75
76 /* allow to overwrite serial and ethaddr */
77 #define CONFIG_ENV_OVERWRITE
78 #define CONFIG_CONS_INDEX       1
79 #define CONFIG_BAUDRATE         115200
80
81 /*
82  * Command definition
83  */
84
85 #include <config_cmd_default.h>
86
87 #define CONFIG_CMD_PING
88 #define CONFIG_CMD_DATE
89 #define CONFIG_CMD_DHCP
90 #define CONFIG_BOOTP_SUBNETMASK
91 #define CONFIG_BOOTP_GATEWAY
92 #define CONFIG_BOOTP_DNS
93
94 #define CONFIG_CMD_NAND
95 #define CONFIG_CMD_CACHE
96
97 #define CONFIG_CMD_I2C
98 #define CONFIG_CMD_SPI
99 #define CONFIG_CMD_MII
100 #define CONFIG_CMD_NET
101
102 #define CONFIG_CMD_MMC
103 #define CONFIG_DOS_PARTITION
104 #define CONFIG_EFI_PARTITION
105 #define CONFIG_CMD_EXT2
106 #define CONFIG_CMD_FAT
107
108 #define CONFIG_CMD_GPIO
109 #define CONFIG_MXC_GPIO
110
111 #define CONFIG_NET_RETRY_COUNT  100
112
113 #define CONFIG_BOOTDELAY        3
114
115 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
116
117
118 /*
119  * Ethernet on SOC (FEC)
120  */
121 #define CONFIG_FEC_MXC
122 #define IMX_FEC_BASE    FEC_BASE_ADDR
123 #define CONFIG_PHYLIB
124 #define CONFIG_PHY_MICREL
125 #define CONFIG_FEC_MXC_PHYADDR  0x1
126
127 #define CONFIG_MII
128 #define CONFIG_DISCOVER_PHY
129
130 #define CONFIG_ARP_TIMEOUT      200UL
131
132 /*
133  * Miscellaneous configurable options
134  */
135 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
136 #define CONFIG_SYS_PROMPT       "woodburn U-Boot > "
137 #define CONFIG_CMDLINE_EDITING
138 #define CONFIG_SYS_HUSH_PARSER  /* Use the HUSH parser */
139
140 #define CONFIG_AUTO_COMPLETE
141 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
142 /* Print Buffer Size */
143 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
144 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
145 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
146
147 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
148 #define CONFIG_SYS_MEMTEST_END          0x10000
149
150 #undef  CONFIG_SYS_CLKS_IN_HZ   /* everything, incl board info, in Hz */
151
152 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
153
154 /*
155  * Stack sizes
156  *
157  * The stack sizes are set up in start.S using the settings below
158  */
159 #define CONFIG_STACKSIZE        (128 * 1024)    /* regular stack */
160
161 /*
162  * Physical Memory Map
163  */
164 #define CONFIG_NR_DRAM_BANKS    1
165 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
166 #define PHYS_SDRAM_1_SIZE       (256 * 1024 * 1024)
167
168 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
169
170 #define CONFIG_SYS_GBL_DATA_OFFSET      (LOW_LEVEL_SRAM_STACK - \
171                                                 IRAM_BASE_ADDR - \
172                                                 GENERATED_GBL_DATA_SIZE)
173 #define CONFIG_SYS_INIT_SP_ADDR         (IRAM_BASE_ADDR + \
174                                         CONFIG_SYS_GBL_DATA_OFFSET)
175
176 /*
177  * MTD Command for mtdparts
178  */
179 #define CONFIG_CMD_MTDPARTS
180 #define CONFIG_MTD_DEVICE
181 #define CONFIG_FLASH_CFI_MTD
182 #define CONFIG_MTD_PARTITIONS
183 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
184 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:50m(root1)," \
185                                 "32m(rootfb)," \
186                                 "64m(pcache)," \
187                                 "64m(app1)," \
188                                 "10m(app2),-(spool);" \
189                                 "physmap-flash.0:512k(u-boot),64k(env1)," \
190                                 "64k(env2),3776k(kernel1),3776k(kernel2)"
191
192 /*
193  * FLASH and environment organization
194  */
195 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
196 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
197 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
198 /* Monitor at beginning of flash */
199 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
200 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
201
202 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
203 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
204
205 /* Address and size of Redundant Environment Sector     */
206 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
207 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
208
209 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
210                                 CONFIG_SYS_MONITOR_LEN)
211
212 #define CONFIG_ENV_IS_IN_FLASH
213
214 /*
215  * CFI FLASH driver setup
216  */
217 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
218 #define CONFIG_FLASH_CFI_DRIVER
219
220 /* A non-standard buffered write algorithm */
221 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
222 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
223
224 /*
225  * NAND FLASH driver setup
226  */
227 #define CONFIG_NAND_MXC
228 #define CONFIG_NAND_MXC_V1_1
229 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
230 #define CONFIG_SYS_MAX_NAND_DEVICE      1
231 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
232 #define CONFIG_MXC_NAND_HWECC
233 #define CONFIG_SYS_NAND_LARGEPAGE
234
235 #if 0
236 #define CONFIG_MTD_DEBUG
237 #define CONFIG_MTD_DEBUG_VERBOSE        7
238 #endif
239 #define CONFIG_SYS_NAND_ONFI_DETECTION
240
241 /*
242  * Default environment and default scripts
243  * to update uboot and load kernel
244  */
245 #define xstr(s) str(s)
246 #define str(s)  #s
247
248 #define CONFIG_HOSTNAME woodburn
249 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
250         "netdev=eth0\0"                                                 \
251         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
252                 "nfsroot=${serverip}:${rootpath}\0"                     \
253         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
254         "addip_sta=setenv bootargs ${bootargs} "                        \
255                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
256                 ":${hostname}:${netdev}:off panic=1\0"                  \
257         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
258         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
259                 "else run addip_sta;fi\0"       \
260         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
261         "addtty=setenv bootargs ${bootargs}"                            \
262                 " console=ttymxc0,${baudrate}\0"                        \
263         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
264         "loadaddr=80800000\0"                                           \
265         "kernel_addr_r=80800000\0"                                      \
266         "hostname=" xstr(CONFIG_HOSTNAME) "\0"                          \
267         "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"                   \
268         "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"             \
269         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
270                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
271         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
272                 "bootm ${kernel_addr}\0"                                \
273         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
274                 "run nfsargs addip addtty addmtd addmisc;"              \
275                 "bootm ${kernel_addr_r}\0"                              \
276         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
277                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
278         "net_self=if run net_self_load;then "                           \
279                 "run ramargs addip addtty addmtd addmisc;"              \
280                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
281                 "else echo Images not loades;fi\0"                      \
282         "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"                 \
283         "load=tftp ${loadaddr} ${u-boot}\0"                             \
284         "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"                \
285         "update=protect off ${uboot_addr} +80000;"                      \
286                 "erase ${uboot_addr} +80000;"                           \
287                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
288         "upd=if run load;then echo Updating u-boot;if run update;"      \
289                 "then echo U-Boot updated;"                             \
290                         "else echo Error updating u-boot !;"            \
291                         "echo Board without bootloader !!;"             \
292                 "fi;"                                                   \
293                 "else echo U-Boot not downloaded..exiting;fi\0"         \
294         "bootcmd=run net_nfs\0"
295
296 #endif                          /* __CONFIG_H */