include/configs/woodburn_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
   4  *
   5  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration for the woodburn board.
   8  */
   9
  10 #ifndef __WOODBURN_COMMON_CONFIG_H
  11 #define __WOODBURN_COMMON_CONFIG_H
  12
  13 #include <asm/arch/imx-regs.h>
  14
  15  /* High Level Configuration Options */
  16 #define CONFIG_MX35
  17 #define CONFIG_MX35_HCLK_FREQ   24000000
  18 #define CONFIG_SYS_FSL_CLK
  19
  20 #define CONFIG_SYS_DCACHE_OFF
  21
  22 #define CONFIG_MACH_TYPE                MACH_TYPE_FLEA3
  23
  24 /* This is required to setup the ESDC controller */
  25
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  27 #define CONFIG_REVISION_TAG
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30
  31 /*
  32  * Size of malloc() pool
  33  */
  34 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  35
  36 /*
  37  * Hardware drivers
  38  */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_MXC
  41 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  44 #define CONFIG_SYS_SPD_BUS_NUM          0
  45
  46 /* PMIC Controller */
  47 #define CONFIG_POWER
  48 #define CONFIG_POWER_I2C
  49 #define CONFIG_POWER_FSL
  50 #define CONFIG_POWER_FSL_MC13892
  51 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
  52 #define CONFIG_RTC_MC13XXX
  53
  54 /* mmc driver */
  55 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  56 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  57
  58 /*
  59  * UART (console)
  60  */
  61 #define CONFIG_MXC_UART
  62 #define CONFIG_MXC_UART_BASE    UART1_BASE
  63
  64 /* allow to overwrite serial and ethaddr */
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 /*
  68  * Command definition
  69  */
  70
  71 #define CONFIG_NET_RETRY_COUNT  100
  72
  73
  74 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  75
  76 /*
  77  * Ethernet on SOC (FEC)
  78  */
  79 #define CONFIG_FEC_MXC
  80 #define IMX_FEC_BASE    FEC_BASE_ADDR
  81 #define CONFIG_FEC_MXC_PHYADDR  0x1
  82
  83 #define CONFIG_DISCOVER_PHY
  84
  85 #define CONFIG_ARP_TIMEOUT      200UL
  86
  87 /*
  88  * Miscellaneous configurable options
  89  */
  90
  91 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
  92 #define CONFIG_SYS_MEMTEST_END          0x10000
  93
  94 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  95
  96 /*
  97  * Physical Memory Map
  98  */
  99 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 100 #define PHYS_SDRAM_1_SIZE       (256 * 1024 * 1024)
 101
 102 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 103
 104 #define CONFIG_SYS_GBL_DATA_OFFSET      (LOW_LEVEL_SRAM_STACK - \
 105                                                 IRAM_BASE_ADDR - \
 106                                                 GENERATED_GBL_DATA_SIZE)
 107 #define CONFIG_SYS_INIT_SP_ADDR         (IRAM_BASE_ADDR + \
 108                                         CONFIG_SYS_GBL_DATA_OFFSET)
 109
 110 /*
 111  * MTD Command for mtdparts
 112  */
 113
 114 /*
 115  * FLASH and environment organization
 116  */
 117 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 118 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 119 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 120 /* Monitor at beginning of flash */
 121 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 122 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 123
 124 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 125 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 126
 127 /* Address and size of Redundant Environment Sector     */
 128 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 129 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 130
 131 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 132                                 CONFIG_SYS_MONITOR_LEN)
 133
 134 /*
 135  * CFI FLASH driver setup
 136  */
 137
 138 /* A non-standard buffered write algorithm */
 139
 140 /*
 141  * NAND FLASH driver setup
 142  */
 143 #define CONFIG_NAND_MXC_V1_1
 144 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 145 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 146 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 147 #define CONFIG_MXC_NAND_HWECC
 148 #define CONFIG_SYS_NAND_LARGEPAGE
 149
 150 #define CONFIG_SYS_NAND_ONFI_DETECTION
 151
 152 /*
 153  * Default environment and default scripts
 154  * to update uboot and load kernel
 155  */
 156
 157 #define CONFIG_HOSTNAME "woodburn"
 158 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 159         "netdev=eth0\0"                                                 \
 160         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 161                 "nfsroot=${serverip}:${rootpath}\0"                     \
 162         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 163         "addip_sta=setenv bootargs ${bootargs} "                        \
 164                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 165                 ":${hostname}:${netdev}:off panic=1\0"                  \
 166         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 167         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 168                 "else run addip_sta;fi\0"       \
 169         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 170         "addtty=setenv bootargs ${bootargs}"                            \
 171                 " console=ttymxc0,${baudrate}\0"                        \
 172         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 173         "loadaddr=80800000\0"                                           \
 174         "kernel_addr_r=80800000\0"                                      \
 175         "hostname=" CONFIG_HOSTNAME "\0"                        \
 176         "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
 177         "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"   \
 178         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 179                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 180         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 181                 "bootm ${kernel_addr}\0"                                \
 182         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 183                 "run nfsargs addip addtty addmtd addmisc;"              \
 184                 "bootm ${kernel_addr_r}\0"                              \
 185         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 186                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 187         "net_self=if run net_self_load;then "                           \
 188                 "run ramargs addip addtty addmtd addmisc;"              \
 189                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 190                 "else echo Images not loades;fi\0"                      \
 191         "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
 192         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 193         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 194         "update=protect off ${uboot_addr} +80000;"                      \
 195                 "erase ${uboot_addr} +80000;"                           \
 196                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 197         "upd=if run load;then echo Updating u-boot;if run update;"      \
 198                 "then echo U-Boot updated;"                             \
 199                         "else echo Error updating u-boot !;"            \
 200                         "echo Board without bootloader !!;"             \
 201                 "fi;"                                                   \
 202                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 203         "bootcmd=run net_nfs\0"
 204
 205 #endif                          /* __CONFIG_H */