Merge git://git.denx.de/u-boot-sunxi
[platform/kernel/u-boot.git] / include / configs / wb50n.h
1 /*
2  * Configuation settings for the WB50N CPU Module.
3  *
4  * SPDX-License-Identifier: GPL-2.0+
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 #include <asm/hardware.h>
11
12 /* ARM asynchronous clock */
13 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
14 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* from 12 MHz crystal */
15
16 #define CONFIG_ARCH_CPU_INIT
17
18 #define CONFIG_CMDLINE_TAG      /* enable passing of ATAGs */
19 #define CONFIG_SETUP_MEMORY_TAGS
20 #define CONFIG_INITRD_TAG
21
22 #ifndef CONFIG_SPL_BUILD
23 #define CONFIG_SKIP_LOWLEVEL_INIT
24 #endif
25
26 /* general purpose I/O */
27 #define CONFIG_AT91_GPIO
28
29 /* serial console */
30 #define CONFIG_ATMEL_USART
31 #define CONFIG_USART_BASE       ATMEL_BASE_DBGU
32 #define CONFIG_USART_ID         ATMEL_ID_DBGU
33
34 /*
35  * BOOTP options
36  */
37 #define CONFIG_BOOTP_BOOTFILESIZE
38
39 /* SDRAM */
40 #define CONFIG_NR_DRAM_BANKS        1
41 #define CONFIG_SYS_SDRAM_BASE       ATMEL_BASE_DDRCS
42 #define CONFIG_SYS_SDRAM_SIZE       0x04000000
43
44 #ifdef CONFIG_SPL_BUILD
45 #define CONFIG_SYS_INIT_SP_ADDR     0x310000
46 #else
47 #define CONFIG_SYS_INIT_SP_ADDR \
48     (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
49 #endif
50
51 #define CONFIG_SYS_MEMTEST_START    0x21000000
52 #define CONFIG_SYS_MEMTEST_END      0x22000000
53
54 /* NAND flash */
55 #define CONFIG_NAND_ATMEL
56 #define CONFIG_SYS_MAX_NAND_DEVICE  1
57 #define CONFIG_SYS_NAND_BASE        ATMEL_BASE_CS3
58 /* our ALE is AD21 */
59 #define CONFIG_SYS_NAND_MASK_ALE    (1 << 21)
60 /* our CLE is AD22 */
61 #define CONFIG_SYS_NAND_MASK_CLE    (1 << 22)
62 #define CONFIG_SYS_NAND_ONFI_DETECTION
63 /* PMECC & PMERRLOC */
64 #define CONFIG_ATMEL_NAND_HWECC
65 #define CONFIG_ATMEL_NAND_HW_PMECC
66 #define CONFIG_PMECC_CAP            8
67 #define CONFIG_PMECC_SECTOR_SIZE    512
68
69 /* Ethernet Hardware */
70 #define CONFIG_MACB
71 #define CONFIG_RMII
72 #define CONFIG_NET_RETRY_COUNT      20
73 #define CONFIG_MACB_SEARCH_PHY
74 #define CONFIG_RGMII
75 #define CONFIG_ETHADDR              C0:EE:40:00:00:00
76 #define CONFIG_ENV_OVERWRITE        1
77
78 #define CONFIG_SYS_LOAD_ADDR        0x22000000  /* load address */
79
80 #define CONFIG_EXTRA_ENV_SETTINGS \
81     "autoload=no\0" \
82     "autostart=no\0"
83
84 /* bootstrap + u-boot + env in nandflash */
85 #define CONFIG_ENV_OFFSET           0xA0000
86 #define CONFIG_ENV_OFFSET_REDUND    0xC0000
87 #define CONFIG_ENV_SIZE             0x20000
88 #define CONFIG_BOOTCOMMAND \
89     "nand read 0x22000000 0x000e0000 0x500000; " \
90     "bootm"
91
92 #define CONFIG_BOOTARGS \
93     "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
94
95 #define CONFIG_BAUDRATE             115200
96
97 #define CONFIG_SYS_CBSIZE           1024
98 #define CONFIG_SYS_MAXARGS          16
99 #define CONFIG_SYS_PBSIZE \
100     (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
101
102 /* Size of malloc() pool */
103 #define CONFIG_SYS_MALLOC_LEN       (2 * 1024 * 1024)
104
105 /* SPL */
106 #define CONFIG_SPL_TEXT_BASE        0x300000
107 #define CONFIG_SPL_MAX_SIZE         0x10000
108 #define CONFIG_SPL_BSS_START_ADDR   0x20000000
109 #define CONFIG_SPL_BSS_MAX_SIZE     0x80000
110 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
111 #define CONFIG_SYS_SPL_MALLOC_SIZE  0x80000
112
113 #define CONFIG_SYS_MONITOR_LEN      (512 << 10)
114
115 #define CONFIG_SPL_NAND_DRIVERS
116 #define CONFIG_SPL_NAND_BASE
117 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
118 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
119 #define CONFIG_SYS_NAND_PAGE_SIZE   0x800
120 #define CONFIG_SYS_NAND_PAGE_COUNT  64
121 #define CONFIG_SYS_NAND_OOBSIZE     64
122 #define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
123 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
124 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
125
126 #endif