2 * Configuation settings for the WB50N CPU Module.
4 * SPDX-License-Identifier: GPL-2.0+
10 #include <asm/hardware.h>
12 /* ARM asynchronous clock */
13 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768
14 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
16 #define CONFIG_ARCH_CPU_INIT
18 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
19 #define CONFIG_SETUP_MEMORY_TAGS
20 #define CONFIG_INITRD_TAG
22 #ifndef CONFIG_SPL_BUILD
23 #define CONFIG_SKIP_LOWLEVEL_INIT
26 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
27 #define CONFIG_IMAGE_FORMAT_LEGACY
29 /* general purpose I/O */
30 #define CONFIG_AT91_GPIO
33 #define CONFIG_ATMEL_USART
34 #define CONFIG_USART_BASE ATMEL_BASE_DBGU
35 #define CONFIG_USART_ID ATMEL_ID_DBGU
40 #define CONFIG_BOOTP_BOOTFILESIZE
43 #define CONFIG_NR_DRAM_BANKS 1
44 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
45 #define CONFIG_SYS_SDRAM_SIZE 0x04000000
47 #ifdef CONFIG_SPL_BUILD
48 #define CONFIG_SYS_INIT_SP_ADDR 0x310000
50 #define CONFIG_SYS_INIT_SP_ADDR \
51 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
54 #define CONFIG_SYS_MEMTEST_START 0x21000000
55 #define CONFIG_SYS_MEMTEST_END 0x22000000
58 #define CONFIG_NAND_ATMEL
59 #define CONFIG_SYS_MAX_NAND_DEVICE 1
60 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
62 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
64 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
65 #define CONFIG_SYS_NAND_ONFI_DETECTION
66 /* PMECC & PMERRLOC */
67 #define CONFIG_ATMEL_NAND_HWECC
68 #define CONFIG_ATMEL_NAND_HW_PMECC
69 #define CONFIG_PMECC_CAP 8
70 #define CONFIG_PMECC_SECTOR_SIZE 512
72 /* Ethernet Hardware */
75 #define CONFIG_NET_RETRY_COUNT 20
76 #define CONFIG_MACB_SEARCH_PHY
78 #define CONFIG_ETHADDR C0:EE:40:00:00:00
79 #define CONFIG_ENV_OVERWRITE 1
81 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
83 #define CONFIG_EXTRA_ENV_SETTINGS \
87 /* bootstrap + u-boot + env in nandflash */
88 #define CONFIG_ENV_OFFSET 0xA0000
89 #define CONFIG_ENV_OFFSET_REDUND 0xC0000
90 #define CONFIG_ENV_SIZE 0x20000
91 #define CONFIG_BOOTCOMMAND \
92 "nand read 0x22000000 0x000e0000 0x500000; " \
95 #define CONFIG_BOOTARGS \
96 "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
98 #define CONFIG_BAUDRATE 115200
100 #define CONFIG_SYS_CBSIZE 1024
101 #define CONFIG_SYS_MAXARGS 16
102 #define CONFIG_SYS_PBSIZE \
103 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
105 /* Size of malloc() pool */
106 #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
109 #define CONFIG_SPL_TEXT_BASE 0x300000
110 #define CONFIG_SPL_MAX_SIZE 0x10000
111 #define CONFIG_SPL_BSS_START_ADDR 0x20000000
112 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
113 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
114 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
116 #define CONFIG_SYS_MONITOR_LEN (512 << 10)
118 #define CONFIG_SPL_NAND_DRIVERS
119 #define CONFIG_SPL_NAND_BASE
120 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
121 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
122 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800
123 #define CONFIG_SYS_NAND_PAGE_COUNT 64
124 #define CONFIG_SYS_NAND_OOBSIZE 64
125 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
126 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
127 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER