include/configs/warp7.h

   1 /*
   2  * Copyright (C) 2016 NXP Semiconductors
   3  *
   4  * Configuration settings for the i.MX7S Warp board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __WARP7_CONFIG_H
  10 #define __WARP7_CONFIG_H
  11
  12 #define CONFIG_BOOTDELAY                1
  13 #include "mx7_common.h"
  14
  15 #define PHYS_SDRAM_SIZE                 SZ_512M
  16
  17 #define CONFIG_BOARD_EARLY_INIT_F
  18
  19 /* MMC Config*/
  20 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
  21 #define CONFIG_SUPPORT_EMMC_BOOT
  22 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
  23 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  24
  25 #define CONFIG_DFU_ENV_SETTINGS \
  26         "dfu_alt_info=image raw 0 0x800000;"\
  27                 "u-boot raw 0 0x4000;"\
  28                 "bootimg part 0 1;"\
  29                 "rootfs part 0 2\0" \
  30
  31 #define CONFIG_EXTRA_ENV_SETTINGS \
  32         CONFIG_DFU_ENV_SETTINGS \
  33         "script=boot.scr\0" \
  34         "image=zImage\0" \
  35         "console=ttymxc0\0" \
  36         "fdt_high=0xffffffff\0" \
  37         "initrd_high=0xffffffff\0" \
  38         "fdt_file=imx7d-warp.dtb\0" \
  39         "fdt_addr=0x83000000\0" \
  40         "boot_fdt=try\0" \
  41         "ip_dyn=yes\0" \
  42         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  43         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  44         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  45         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  46                 "root=${mmcroot}\0" \
  47         "loadbootscript=" \
  48                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  49         "bootscript=echo Running bootscript from mmc ...; " \
  50                 "source\0" \
  51         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  52         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  53         "mmcboot=echo Booting from mmc ...; " \
  54                 "run mmcargs; " \
  55                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  56                         "if run loadfdt; then " \
  57                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  58                         "else " \
  59                                 "if test ${boot_fdt} = try; then " \
  60                                         "bootz; " \
  61                                 "else " \
  62                                         "echo WARN: Cannot load the DT; " \
  63                                 "fi; " \
  64                         "fi; " \
  65                 "else " \
  66                         "bootz; " \
  67                 "fi;\0" \
  68
  69 #define CONFIG_BOOTCOMMAND \
  70            "mmc dev ${mmcdev};" \
  71            "mmc dev ${mmcdev}; if mmc rescan; then " \
  72                    "if run loadbootscript; then " \
  73                            "run bootscript; " \
  74                    "else " \
  75                            "if run loadimage; then " \
  76                                    "run mmcboot; " \
  77                            "fi; " \
  78                    "fi; " \
  79            "fi"
  80
  81 #define CONFIG_CMD_MEMTEST
  82 #define CONFIG_SYS_MEMTEST_START        0x80000000
  83 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
  84
  85 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  86 #define CONFIG_SYS_HZ                   1000
  87
  88 #define CONFIG_STACKSIZE                SZ_128K
  89
  90 /* Physical Memory Map */
  91 #define CONFIG_NR_DRAM_BANKS            1
  92 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  93
  94 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  95 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  96 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  97
  98 #define CONFIG_SYS_INIT_SP_OFFSET \
  99         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 100 #define CONFIG_SYS_INIT_SP_ADDR \
 101         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 102
 103 /* FLASH and environment organization */
 104 #define CONFIG_SYS_NO_FLASH
 105 #define CONFIG_ENV_SIZE                 SZ_8K
 106 #define CONFIG_ENV_IS_IN_MMC
 107
 108 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 109 #define CONFIG_SYS_FSL_USDHC_NUM        1
 110
 111 #define CONFIG_SYS_MMC_ENV_DEV          0
 112 #define CONFIG_SYS_MMC_ENV_PART         0
 113 #define CONFIG_MMCROOT                  "/dev/mmcblk2p2"
 114
 115 /* USB Configs */
 116 #define CONFIG_CMD_USB
 117 #define CONFIG_USB_EHCI
 118 #define CONFIG_USB_EHCI_MX7
 119 #define CONFIG_USB_STORAGE
 120 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 121
 122 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 123 #define CONFIG_MXC_USB_FLAGS            0
 124 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
 125
 126 #define CONFIG_IMX_THERMAL
 127
 128 #define CONFIG_CI_UDC
 129 #define CONFIG_USBD_HS
 130 #define CONFIG_USB_GADGET_DUALSPEED
 131
 132 #define CONFIG_USB_GADGET
 133 #define CONFIG_CMD_USB_MASS_STORAGE
 134 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 135 #define CONFIG_USB_GADGET_DOWNLOAD
 136 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 137
 138 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 139 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 140 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 141
 142 /* USB Device Firmware Update support */
 143 #define CONFIG_CMD_DFU
 144 #define CONFIG_USB_FUNCTION_DFU
 145 #define CONFIG_DFU_MMC
 146 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
 147 #define DFU_DEFAULT_POLL_TIMEOUT        300
 148
 149 #endif