include/configs/warp7.h

   1 /*
   2  * Copyright (C) 2016 NXP Semiconductors
   3  *
   4  * Configuration settings for the i.MX7S Warp board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __WARP7_CONFIG_H
  10 #define __WARP7_CONFIG_H
  11
  12 #define CONFIG_BOOTDELAY                1
  13 #include "mx7_common.h"
  14
  15 #define PHYS_SDRAM_SIZE                 SZ_512M
  16
  17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20
  21 /* MMC Config*/
  22 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
  23 #define CONFIG_SUPPORT_EMMC_BOOT
  24 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
  25 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  26
  27 #define CONFIG_DFU_ENV_SETTINGS \
  28         "dfu_alt_info=image raw 0 0x800000;"\
  29                 "u-boot raw 0 0x4000;"\
  30                 "bootimg part 0 1;"\
  31                 "rootfs part 0 2\0" \
  32
  33 #define CONFIG_EXTRA_ENV_SETTINGS \
  34         CONFIG_DFU_ENV_SETTINGS \
  35         "script=boot.scr\0" \
  36         "image=zImage\0" \
  37         "console=ttymxc0\0" \
  38         "fdt_high=0xffffffff\0" \
  39         "initrd_high=0xffffffff\0" \
  40         "fdt_file=imx7d-warp.dtb\0" \
  41         "fdt_addr=0x83000000\0" \
  42         "boot_fdt=try\0" \
  43         "ip_dyn=yes\0" \
  44         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  45         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  46         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  47         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  48                 "root=${mmcroot}\0" \
  49         "loadbootscript=" \
  50                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  51         "bootscript=echo Running bootscript from mmc ...; " \
  52                 "source\0" \
  53         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  54         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  55         "mmcboot=echo Booting from mmc ...; " \
  56                 "run mmcargs; " \
  57                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  58                         "if run loadfdt; then " \
  59                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  60                         "else " \
  61                                 "if test ${boot_fdt} = try; then " \
  62                                         "bootz; " \
  63                                 "else " \
  64                                         "echo WARN: Cannot load the DT; " \
  65                                 "fi; " \
  66                         "fi; " \
  67                 "else " \
  68                         "bootz; " \
  69                 "fi;\0" \
  70
  71 #define CONFIG_BOOTCOMMAND \
  72            "mmc dev ${mmcdev};" \
  73            "mmc dev ${mmcdev}; if mmc rescan; then " \
  74                    "if run loadbootscript; then " \
  75                            "run bootscript; " \
  76                    "else " \
  77                            "if run loadimage; then " \
  78                                    "run mmcboot; " \
  79                            "fi; " \
  80                    "fi; " \
  81            "fi"
  82
  83 #define CONFIG_CMD_MEMTEST
  84 #define CONFIG_SYS_MEMTEST_START        0x80000000
  85 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
  86
  87 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  88 #define CONFIG_SYS_HZ                   1000
  89
  90 #define CONFIG_STACKSIZE                SZ_128K
  91
  92 /* Physical Memory Map */
  93 #define CONFIG_NR_DRAM_BANKS            1
  94 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  95
  96 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  97 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  98 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  99
 100 #define CONFIG_SYS_INIT_SP_OFFSET \
 101         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 102 #define CONFIG_SYS_INIT_SP_ADDR \
 103         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 104
 105 /* FLASH and environment organization */
 106 #define CONFIG_SYS_NO_FLASH
 107 #define CONFIG_ENV_SIZE                 SZ_8K
 108 #define CONFIG_ENV_IS_IN_MMC
 109
 110 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 111 #define CONFIG_SYS_FSL_USDHC_NUM        1
 112
 113 #define CONFIG_SYS_MMC_ENV_DEV          0
 114 #define CONFIG_SYS_MMC_ENV_PART         0
 115 #define CONFIG_MMCROOT                  "/dev/mmcblk2p2"
 116
 117 /* USB Configs */
 118 #define CONFIG_CMD_USB
 119 #define CONFIG_USB_EHCI
 120 #define CONFIG_USB_EHCI_MX7
 121 #define CONFIG_USB_STORAGE
 122 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 123
 124 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 125 #define CONFIG_MXC_USB_FLAGS            0
 126 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
 127
 128 #define CONFIG_IMX_THERMAL
 129
 130 #define CONFIG_CI_UDC
 131 #define CONFIG_USBD_HS
 132 #define CONFIG_USB_GADGET_DUALSPEED
 133
 134 #define CONFIG_USB_GADGET
 135 #define CONFIG_CMD_USB_MASS_STORAGE
 136 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 137 #define CONFIG_USB_GADGET_DOWNLOAD
 138 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 139
 140 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 141 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 142 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 143
 144 /* USB Device Firmware Update support */
 145 #define CONFIG_CMD_DFU
 146 #define CONFIG_USB_FUNCTION_DFU
 147 #define CONFIG_DFU_MMC
 148 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
 149 #define DFU_DEFAULT_POLL_TIMEOUT        300
 150
 151 #endif