include/configs/warp.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 O.S. Systems Software LTDA.
   4  * Copyright (C) 2014 Kynetics LLC.
   5  * Copyright (C) 2014 Revolution Robotics, Inc.
   6  *
   7  * Author: Otavio Salvador <otavio@ossystems.com.br>
   8  *
   9  * Configuration settings for the WaRP Board
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include "mx6_common.h"
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (35 * SZ_1M) /* Increase due to DFU */
  19
  20 #define CONFIG_MXC_UART
  21 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  22
  23 /* MMC Configs */
  24 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  25 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
  26
  27 /* Watchdog */
  28
  29 /* Physical Memory Map */
  30 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  31
  32 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  33 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  34 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  35
  36 #define CONFIG_SYS_INIT_SP_OFFSET \
  37         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  38 #define CONFIG_SYS_INIT_SP_ADDR \
  39         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  40
  41 #define CONFIG_SYS_MMC_ENV_DEV          0
  42
  43 /* VDD voltage 1.65 - 1.95 */
  44 #define CONFIG_SYS_SD_VOLTAGE           0x00000080
  45
  46 /* USB Configs */
  47 #ifdef CONFIG_CMD_USB
  48 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  49 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  50 #define CONFIG_MXC_USB_FLAGS            0
  51 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */
  52 #endif
  53
  54 #define CONFIG_USBD_HS
  55
  56 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
  57 #define DFU_DEFAULT_POLL_TIMEOUT 300
  58
  59 /* I2C Configs */
  60 #define CONFIG_SYS_I2C
  61 #define CONFIG_SYS_I2C_MXC
  62 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  63 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  64 #define CONFIG_SYS_I2C_SPEED              100000
  65
  66 /* PMIC */
  67 #define CONFIG_POWER
  68 #define CONFIG_POWER_I2C
  69 #define CONFIG_POWER_MAX77696
  70
  71 #define CONFIG_EXTRA_ENV_SETTINGS \
  72         "script=boot.scr\0" \
  73         "image=zImage\0" \
  74         "console=ttymxc0\0" \
  75         "fdt_high=0xffffffff\0" \
  76         "initrd_high=0xffffffff\0" \
  77         "fdt_file=imx6sl-warp.dtb\0" \
  78         "fdt_addr=0x88000000\0" \
  79         "initrd_addr=0x83800000\0" \
  80         "boot_fdt=try\0" \
  81         "ip_dyn=yes\0" \
  82         "mmcdev=0\0" \
  83         "mmcpart=1\0" \
  84         "finduuid=part uuid mmc 0:2 uuid\0" \
  85         "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
  86         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  87                 "root=PARTUUID=${uuid} rootwait rw\0" \
  88         "loadbootscript=" \
  89                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  90         "bootscript=echo Running bootscript from mmc ...; " \
  91                 "source\0" \
  92         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  93         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  94         "mmcboot=echo Booting from mmc ...; " \
  95                 "run finduuid; " \
  96                 "run mmcargs; " \
  97                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  98                         "if run loadfdt; then " \
  99                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 100                         "else " \
 101                                 "if test ${boot_fdt} = try; then " \
 102                                         "bootz; " \
 103                                 "else " \
 104                                         "echo WARN: Cannot load the DT; " \
 105                                 "fi; " \
 106                         "fi; " \
 107                 "else " \
 108                         "bootz; " \
 109                 "fi;\0" \
 110         "netargs=setenv bootargs console=${console},${baudrate} " \
 111                 "root=/dev/nfs " \
 112         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 113                 "netboot=echo Booting from net ...; " \
 114                 "run netargs; " \
 115                 "if test ${ip_dyn} = yes; then " \
 116                         "setenv get_cmd dhcp; " \
 117                 "else " \
 118                         "setenv get_cmd tftp; " \
 119                 "fi; " \
 120                 "${get_cmd} ${image}; " \
 121                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 122                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 123                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 124                         "else " \
 125                                 "if test ${boot_fdt} = try; then " \
 126                                         "bootz; " \
 127                                 "else " \
 128                                         "echo WARN: Cannot load the DT; " \
 129                                 "fi; " \
 130                         "fi; " \
 131                 "else " \
 132                         "bootz; " \
 133                 "fi;\0"
 134
 135 #define CONFIG_BOOTCOMMAND \
 136            "mmc dev ${mmcdev};" \
 137            "mmc dev ${mmcdev}; if mmc rescan; then " \
 138                    "if run loadbootscript; then " \
 139                            "run bootscript; " \
 140                    "else " \
 141                            "if run loadimage; then " \
 142                                    "run mmcboot; " \
 143                            "else run netboot; " \
 144                            "fi; " \
 145                    "fi; " \
 146            "else run netboot; fi"
 147
 148 #endif                          /* __CONFIG_H */