include/configs/wandboard.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Wandboard.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14 #include <asm/sizes.h>
  15
  16 #define CONFIG_MX6
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define MACH_TYPE_WANDBOARD             4412
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  30
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_BOARD_LATE_INIT
  33 #define CONFIG_MXC_GPIO
  34
  35 #define CONFIG_MXC_UART
  36 #define CONFIG_MXC_UART_BASE            UART1_BASE
  37
  38 /* allow to overwrite serial and ethaddr */
  39 #define CONFIG_ENV_OVERWRITE
  40 #define CONFIG_CONS_INDEX               1
  41 #define CONFIG_BAUDRATE                 115200
  42
  43 /* Command definition */
  44 #include <config_cmd_default.h>
  45
  46 #undef CONFIG_CMD_IMLS
  47
  48 #define CONFIG_CMD_BMODE
  49 #define CONFIG_CMD_SETEXPR
  50
  51 #define CONFIG_BOOTDELAY                5
  52
  53 #define CONFIG_SYS_MEMTEST_START        0x10000000
  54 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  55 #define CONFIG_LOADADDR                 0x12000000
  56 #define CONFIG_SYS_TEXT_BASE            0x17800000
  57
  58 /* MMC Configuration */
  59 #define CONFIG_FSL_ESDHC
  60 #define CONFIG_FSL_USDHC
  61 #define CONFIG_SYS_FSL_USDHC_NUM        2
  62 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  63
  64 #define CONFIG_MMC
  65 #define CONFIG_CMD_MMC
  66 #define CONFIG_GENERIC_MMC
  67 #define CONFIG_BOUNCE_BUFFER
  68 #define CONFIG_CMD_EXT2
  69 #define CONFIG_CMD_FAT
  70 #define CONFIG_DOS_PARTITION
  71
  72 /* Ethernet Configuration */
  73 #define CONFIG_CMD_PING
  74 #define CONFIG_CMD_DHCP
  75 #define CONFIG_CMD_MII
  76 #define CONFIG_CMD_NET
  77 #define CONFIG_FEC_MXC
  78 #define CONFIG_MII
  79 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  80 #define CONFIG_FEC_XCV_TYPE             RGMII
  81 #define CONFIG_ETHPRIME                 "FEC"
  82 #define CONFIG_FEC_MXC_PHYADDR          1
  83 #define CONFIG_PHYLIB
  84 #define CONFIG_PHY_ATHEROS
  85
  86 /* Framebuffer */
  87 #define CONFIG_VIDEO
  88 #define CONFIG_VIDEO_IPUV3
  89 #define CONFIG_CFB_CONSOLE
  90 #define CONFIG_VGA_AS_SINGLE_DEVICE
  91 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  92 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  93 #define CONFIG_VIDEO_BMP_RLE8
  94 #define CONFIG_SPLASH_SCREEN
  95 #define CONFIG_SPLASH_SCREEN_ALIGN
  96 #define CONFIG_BMP_16BPP
  97 #define CONFIG_VIDEO_LOGO
  98 #define CONFIG_VIDEO_BMP_LOGO
  99 #define CONFIG_IPUV3_CLK 260000000
 100 #define CONFIG_IMX_HDMI
 101
 102 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 103 #define CONFIG_DEFAULT_FDT_FILE         "imx6dl-wandboard.dtb"
 104 #elif defined(CONFIG_MX6Q)
 105 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-wandboard.dtb"
 106 #endif
 107
 108 #define CONFIG_EXTRA_ENV_SETTINGS \
 109         "script=boot.scr\0" \
 110         "uimage=uImage\0" \
 111         "console=ttymxc0\0" \
 112         "splashpos=m,m\0" \
 113         "fdt_high=0xffffffff\0" \
 114         "initrd_high=0xffffffff\0" \
 115         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 116         "fdt_addr=0x11000000\0" \
 117         "boot_fdt=try\0" \
 118         "ip_dyn=yes\0" \
 119         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 120         "mmcpart=1\0" \
 121         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 122         "update_sd_firmware_filename=u-boot.imx\0" \
 123         "update_sd_firmware=" \
 124                 "if test ${ip_dyn} = yes; then " \
 125                         "setenv get_cmd dhcp; " \
 126                 "else " \
 127                         "setenv get_cmd tftp; " \
 128                 "fi; " \
 129                 "if mmc dev ${mmcdev}; then "   \
 130                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 131                                 "setexpr fw_sz ${filesize} / 0x200; " \
 132                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 133                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 134                         "fi; "  \
 135                 "fi\0" \
 136         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 137                 "root=${mmcroot}\0" \
 138         "loadbootscript=" \
 139                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 140         "bootscript=echo Running bootscript from mmc ...; " \
 141                 "source\0" \
 142         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 143         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 144         "mmcboot=echo Booting from mmc ...; " \
 145                 "run mmcargs; " \
 146                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 147                         "if run loadfdt; then " \
 148                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 149                         "else " \
 150                                 "if test ${boot_fdt} = try; then " \
 151                                         "bootm; " \
 152                                 "else " \
 153                                         "echo WARN: Cannot load the DT; " \
 154                                 "fi; " \
 155                         "fi; " \
 156                 "else " \
 157                         "bootm; " \
 158                 "fi;\0" \
 159         "netargs=setenv bootargs console=${console},${baudrate} " \
 160                 "root=/dev/nfs " \
 161         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 162                 "netboot=echo Booting from net ...; " \
 163                 "run netargs; " \
 164                 "if test ${ip_dyn} = yes; then " \
 165                         "setenv get_cmd dhcp; " \
 166                 "else " \
 167                         "setenv get_cmd tftp; " \
 168                 "fi; " \
 169                 "${get_cmd} ${uimage}; " \
 170                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 171                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 172                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 173                         "else " \
 174                                 "if test ${boot_fdt} = try; then " \
 175                                         "bootm; " \
 176                                 "else " \
 177                                         "echo WARN: Cannot load the DT; " \
 178                                 "fi; " \
 179                         "fi; " \
 180                 "else " \
 181                         "bootm; " \
 182                 "fi;\0"
 183
 184 #define CONFIG_BOOTCOMMAND \
 185            "mmc dev ${mmcdev}; if mmc rescan; then " \
 186                    "if run loadbootscript; then " \
 187                            "run bootscript; " \
 188                    "else " \
 189                            "if run loaduimage; then " \
 190                                    "run mmcboot; " \
 191                            "else run netboot; " \
 192                            "fi; " \
 193                    "fi; " \
 194            "else run netboot; fi"
 195
 196 /* Miscellaneous configurable options */
 197 #define CONFIG_SYS_LONGHELP
 198 #define CONFIG_SYS_HUSH_PARSER
 199 #define CONFIG_AUTO_COMPLETE
 200 #define CONFIG_SYS_CBSIZE               256
 201
 202 /* Print Buffer Size */
 203 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 204 #define CONFIG_SYS_MAXARGS             16
 205 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 206
 207 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 208
 209 #define CONFIG_CMDLINE_EDITING
 210
 211 /* Physical Memory Map */
 212 #define CONFIG_NR_DRAM_BANKS            1
 213 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 214
 215 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 216 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 217 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 218
 219 #define CONFIG_SYS_INIT_SP_OFFSET \
 220         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 221 #define CONFIG_SYS_INIT_SP_ADDR \
 222         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 223
 224 /* FLASH and environment organization */
 225 #define CONFIG_SYS_NO_FLASH
 226
 227 #define CONFIG_ENV_SIZE                 (8 * 1024)
 228
 229 #define CONFIG_ENV_IS_IN_MMC
 230 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 231 #define CONFIG_SYS_MMC_ENV_DEV          0
 232
 233 #define CONFIG_OF_LIBFDT
 234 #define CONFIG_CMD_BOOTZ
 235
 236 #ifndef CONFIG_SYS_DCACHE_OFF
 237 #define CONFIG_CMD_CACHE
 238 #endif
 239
 240 #endif                         /* __CONFIG_H * */