Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh
[platform/kernel/u-boot.git] / include / configs / wandboard.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the Wandboard.
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include "mx6_common.h"
12
13 #include "imx6_spl.h"
14
15 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD_IMX6
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
19
20 #define CONFIG_MXC_UART_BASE            UART1_BASE
21
22 /* SATA Configs */
23
24 #ifdef CONFIG_CMD_SATA
25 #define CONFIG_SYS_SATA_MAX_DEVICE      1
26 #define CONFIG_DWC_AHSATA_PORT_ID       0
27 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
28 #define CONFIG_LBA48
29 #endif
30
31 /* MMC Configuration */
32 #define CONFIG_SYS_FSL_USDHC_NUM        2
33 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
34
35 /* USB Configs */
36 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
37 #define CONFIG_MXC_USB_FLAGS            0
38
39 /* Framebuffer */
40 #define CONFIG_VIDEO_BMP_RLE8
41 #define CONFIG_SPLASH_SCREEN
42 #define CONFIG_SPLASH_SCREEN_ALIGN
43 #define CONFIG_BMP_16BPP
44 #define CONFIG_VIDEO_LOGO
45 #define CONFIG_VIDEO_BMP_LOGO
46 #define CONFIG_IMX_HDMI
47 #define CONFIG_IMX_VIDEO_SKIP
48
49 #define CONFIG_EXTRA_ENV_SETTINGS \
50         "console=ttymxc0\0" \
51         "splashpos=m,m\0" \
52         "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
53         "fdtfile=undefined\0" \
54         "fdt_high=0xffffffff\0" \
55         "initrd_high=0xffffffff\0" \
56         "fdt_addr_r=0x18000000\0" \
57         "fdt_addr=0x18000000\0" \
58         "ip_dyn=yes\0" \
59         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
60         "finduuid=part uuid mmc 0:1 uuid\0" \
61         "update_sd_firmware_filename=u-boot.imx\0" \
62         "update_sd_firmware=" \
63                 "if test ${ip_dyn} = yes; then " \
64                         "setenv get_cmd dhcp; " \
65                 "else " \
66                         "setenv get_cmd tftp; " \
67                 "fi; " \
68                 "if mmc dev ${mmcdev}; then "   \
69                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
70                                 "setexpr fw_sz ${filesize} / 0x200; " \
71                                 "setexpr fw_sz ${fw_sz} + 1; "  \
72                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
73                         "fi; "  \
74                 "fi\0" \
75         "findfdt="\
76                 "if test $board_name = D1 && test $board_rev = MX6QP ; then " \
77                         "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
78                 "if test $board_name = D1 && test $board_rev = MX6Q ; then " \
79                         "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
80                 "if test $board_name = D1 && test $board_rev = MX6DL ; then " \
81                         "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
82                 "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
83                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
84                 "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
85                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
86                 "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
87                         "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
88                 "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
89                         "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
90                 "if test $fdtfile = undefined; then " \
91                         "echo WARNING: Could not determine dtb to use; fi; \0" \
92         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
93         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
94         "ramdisk_addr_r=0x13000000\0" \
95         "ramdiskaddr=0x13000000\0" \
96         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
97         BOOTENV
98
99 #define BOOT_TARGET_DEVICES(func) \
100         func(MMC, mmc, 0) \
101         func(MMC, mmc, 1) \
102         func(MMC, mmc, 2) \
103         func(SATA, sata, 0) \
104         func(USB, usb, 0) \
105         func(PXE, pxe, na) \
106         func(DHCP, dhcp, na)
107
108 #include <config_distro_bootcmd.h>
109 #include <linux/stringify.h>
110
111 /* Physical Memory Map */
112 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
113
114 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
115 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
116 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
117
118 #define CONFIG_SYS_INIT_SP_OFFSET \
119         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
120 #define CONFIG_SYS_INIT_SP_ADDR \
121         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
122
123 /* Environment organization */
124
125 #define CONFIG_SYS_MMC_ENV_DEV          0
126
127 #endif                         /* __CONFIG_H * */