include/configs/wandboard.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Wandboard.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #include "imx6_spl.h"
  14
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD_IMX6
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  19
  20 #define CONFIG_MXC_UART
  21 #define CONFIG_MXC_UART_BASE            UART1_BASE
  22
  23 /* SATA Configs */
  24
  25 #ifdef CONFIG_CMD_SATA
  26 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  27 #define CONFIG_DWC_AHSATA_PORT_ID       0
  28 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  29 #define CONFIG_LBA48
  30 #endif
  31
  32 #define CONFIG_SYS_MEMTEST_START        0x10000000
  33 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  34
  35 /* I2C Configs */
  36 #define CONFIG_SYS_I2C
  37 #define CONFIG_SYS_I2C_MXC
  38 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  39 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  40 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  41 #define CONFIG_SYS_I2C_SPEED            100000
  42
  43 /* PMIC */
  44 #define CONFIG_POWER
  45 #define CONFIG_POWER_I2C
  46 #define CONFIG_POWER_PFUZE100
  47 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  48
  49 /* MMC Configuration */
  50 #define CONFIG_SYS_FSL_USDHC_NUM        2
  51 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  52
  53 /* USB Configs */
  54 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  55 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  56 #define CONFIG_MXC_USB_FLAGS            0
  57
  58 /* Ethernet Configuration */
  59 #define CONFIG_FEC_MXC
  60 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  61 #define CONFIG_FEC_XCV_TYPE             RGMII
  62 #define CONFIG_ETHPRIME                 "FEC"
  63 #define CONFIG_FEC_MXC_PHYADDR          1
  64 #define CONFIG_PHY_ATHEROS
  65
  66 /* Framebuffer */
  67 #ifdef CONFIG_VIDEO
  68 #define CONFIG_VIDEO_IPUV3
  69 #define CONFIG_VIDEO_BMP_RLE8
  70 #define CONFIG_SPLASH_SCREEN
  71 #define CONFIG_SPLASH_SCREEN_ALIGN
  72 #define CONFIG_BMP_16BPP
  73 #define CONFIG_VIDEO_LOGO
  74 #define CONFIG_VIDEO_BMP_LOGO
  75 #define CONFIG_IMX_HDMI
  76 #define CONFIG_IMX_VIDEO_SKIP
  77 #endif
  78
  79 #define CONFIG_EXTRA_ENV_SETTINGS \
  80         "console=ttymxc0\0" \
  81         "splashpos=m,m\0" \
  82         "fdtfile=undefined\0" \
  83         "fdt_high=0xffffffff\0" \
  84         "initrd_high=0xffffffff\0" \
  85         "fdt_addr_r=0x18000000\0" \
  86         "fdt_addr=0x18000000\0" \
  87         "ip_dyn=yes\0" \
  88         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  89         "finduuid=part uuid mmc 0:1 uuid\0" \
  90         "update_sd_firmware_filename=u-boot.imx\0" \
  91         "update_sd_firmware=" \
  92                 "if test ${ip_dyn} = yes; then " \
  93                         "setenv get_cmd dhcp; " \
  94                 "else " \
  95                         "setenv get_cmd tftp; " \
  96                 "fi; " \
  97                 "if mmc dev ${mmcdev}; then "   \
  98                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  99                                 "setexpr fw_sz ${filesize} / 0x200; " \
 100                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 101                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 102                         "fi; "  \
 103                 "fi\0" \
 104         "findfdt="\
 105                 "if test $board_name = D1 && test $board_rev = MX6QP ; then " \
 106                         "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
 107                 "if test $board_name = D1 && test $board_rev = MX6Q ; then " \
 108                         "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
 109                 "if test $board_name = D1 && test $board_rev = MX6DL ; then " \
 110                         "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
 111                 "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 112                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
 113                 "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
 114                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
 115                 "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
 116                         "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
 117                 "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
 118                         "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 119                 "if test $fdtfile = undefined; then " \
 120                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 121         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 122         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 123         "ramdisk_addr_r=0x13000000\0" \
 124         "ramdiskaddr=0x13000000\0" \
 125         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 126         BOOTENV
 127
 128 #define BOOT_TARGET_DEVICES(func) \
 129         func(MMC, mmc, 0) \
 130         func(MMC, mmc, 1) \
 131         func(SATA, sata, 0) \
 132         func(USB, usb, 0) \
 133         func(PXE, pxe, na) \
 134         func(DHCP, dhcp, na)
 135
 136 #include <config_distro_bootcmd.h>
 137
 138 /* Physical Memory Map */
 139 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 140
 141 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 142 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 143 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 144
 145 #define CONFIG_SYS_INIT_SP_OFFSET \
 146         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 147 #define CONFIG_SYS_INIT_SP_ADDR \
 148         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 149
 150 /* Environment organization */
 151 #define CONFIG_ENV_SIZE                 (8 * 1024)
 152
 153 #define CONFIG_ENV_OFFSET               (768 * 1024)
 154 #define CONFIG_SYS_MMC_ENV_DEV          0
 155
 156 #endif                         /* __CONFIG_H * */