include/configs/wandboard.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Wandboard.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #include "imx6_spl.h"
  14
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD_IMX6
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  19
  20 #define CONFIG_MXC_UART
  21 #define CONFIG_MXC_UART_BASE            UART1_BASE
  22
  23 /* SATA Configs */
  24
  25 #ifdef CONFIG_CMD_SATA
  26 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  27 #define CONFIG_DWC_AHSATA_PORT_ID       0
  28 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  29 #define CONFIG_LBA48
  30 #endif
  31
  32 #define CONFIG_SYS_MEMTEST_START        0x10000000
  33 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  34
  35 /* MMC Configuration */
  36 #define CONFIG_SYS_FSL_USDHC_NUM        2
  37 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  38
  39 /* USB Configs */
  40 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  41 #define CONFIG_MXC_USB_FLAGS            0
  42
  43 /* Framebuffer */
  44 #define CONFIG_VIDEO_BMP_RLE8
  45 #define CONFIG_SPLASH_SCREEN
  46 #define CONFIG_SPLASH_SCREEN_ALIGN
  47 #define CONFIG_BMP_16BPP
  48 #define CONFIG_VIDEO_LOGO
  49 #define CONFIG_VIDEO_BMP_LOGO
  50 #define CONFIG_IMX_HDMI
  51 #define CONFIG_IMX_VIDEO_SKIP
  52
  53 #define CONFIG_EXTRA_ENV_SETTINGS \
  54         "console=ttymxc0\0" \
  55         "splashpos=m,m\0" \
  56         "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
  57         "fdtfile=undefined\0" \
  58         "fdt_high=0xffffffff\0" \
  59         "initrd_high=0xffffffff\0" \
  60         "fdt_addr_r=0x18000000\0" \
  61         "fdt_addr=0x18000000\0" \
  62         "ip_dyn=yes\0" \
  63         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  64         "finduuid=part uuid mmc 0:1 uuid\0" \
  65         "update_sd_firmware_filename=u-boot.imx\0" \
  66         "update_sd_firmware=" \
  67                 "if test ${ip_dyn} = yes; then " \
  68                         "setenv get_cmd dhcp; " \
  69                 "else " \
  70                         "setenv get_cmd tftp; " \
  71                 "fi; " \
  72                 "if mmc dev ${mmcdev}; then "   \
  73                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  74                                 "setexpr fw_sz ${filesize} / 0x200; " \
  75                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  76                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  77                         "fi; "  \
  78                 "fi\0" \
  79         "findfdt="\
  80                 "if test $board_name = D1 && test $board_rev = MX6QP ; then " \
  81                         "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
  82                 "if test $board_name = D1 && test $board_rev = MX6Q ; then " \
  83                         "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
  84                 "if test $board_name = D1 && test $board_rev = MX6DL ; then " \
  85                         "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
  86                 "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
  87                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
  88                 "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
  89                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
  90                 "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
  91                         "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
  92                 "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
  93                         "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
  94                 "if test $fdtfile = undefined; then " \
  95                         "echo WARNING: Could not determine dtb to use; fi; \0" \
  96         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  97         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  98         "ramdisk_addr_r=0x13000000\0" \
  99         "ramdiskaddr=0x13000000\0" \
 100         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 101         BOOTENV
 102
 103 #define BOOT_TARGET_DEVICES(func) \
 104         func(MMC, mmc, 0) \
 105         func(MMC, mmc, 1) \
 106         func(MMC, mmc, 2) \
 107         func(SATA, sata, 0) \
 108         func(USB, usb, 0) \
 109         func(PXE, pxe, na) \
 110         func(DHCP, dhcp, na)
 111
 112 #include <config_distro_bootcmd.h>
 113
 114 /* Physical Memory Map */
 115 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 116
 117 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 118 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 119 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 120
 121 #define CONFIG_SYS_INIT_SP_OFFSET \
 122         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 123 #define CONFIG_SYS_INIT_SP_ADDR \
 124         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 125
 126 /* Environment organization */
 127
 128 #define CONFIG_SYS_MMC_ENV_DEV          0
 129
 130 #endif                         /* __CONFIG_H * */