2 * Copyright (C) 2016 samtec automotive software & electronics gmbh
4 * Configuration settings for the Samtec VIN|ING 2000 board.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include "mx6_common.h"
18 /* Size of malloc() pool */
19 #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
21 #define CONFIG_BOARD_EARLY_INIT_F
23 #define CONFIG_MXC_UART
24 #define CONFIG_MXC_UART_BASE UART1_BASE
26 #define BOOT_TARGET_DEVICES(func) \
32 #include <config_distro_bootcmd.h>
34 /* Miscellaneous configurable options */
35 #define CONFIG_SYS_MEMTEST_START 0x80000000
36 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
38 #define CONFIG_STACKSIZE SZ_128K
40 /* Physical Memory Map */
41 #define CONFIG_NR_DRAM_BANKS 1
42 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
44 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
45 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
46 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
48 #define CONFIG_SYS_INIT_SP_OFFSET \
49 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
50 #define CONFIG_SYS_INIT_SP_ADDR \
51 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
53 /* MMC Configuration */
54 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
57 #define CONFIG_SYS_I2C
58 #define CONFIG_SYS_I2C_MXC
59 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
60 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
61 #define CONFIG_SYS_I2C_SPEED 100000
65 #define CONFIG_POWER_I2C
66 #define CONFIG_POWER_PFUZE100
67 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
70 #define CONFIG_FEC_MXC
73 #define IMX_FEC_BASE ENET_BASE_ADDR
74 #define CONFIG_FEC_MXC_PHYADDR 0x0
76 #define CONFIG_FEC_XCV_TYPE RMII
77 #define CONFIG_ETHPRIME "FEC"
80 #define CONFIG_PHY_ATHEROS
83 #define CONFIG_USB_EHCI
84 #define CONFIG_USB_EHCI_MX6
85 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
86 #define CONFIG_USB_HOST_ETHER
87 #define CONFIG_USB_ETHER_ASIX
88 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
89 #define CONFIG_MXC_USB_FLAGS 0
90 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
93 #define CONFIG_CMD_PCI
95 #define CONFIG_PCI_SCAN_SHOW
96 #define CONFIG_PCIE_IMX
97 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6)
100 #define CONFIG_IMX_THERMAL
102 #define CONFIG_PWM_IMX
103 #define CONFIG_IMX6_PWM_PER_CLK 66000000
104 #define CONFIG_BOARD_LATE_INIT
106 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
107 #define CONFIG_ENV_OFFSET (8 * SZ_64K)
108 #define CONFIG_ENV_SIZE SZ_8K
109 #define CONFIG_ENV_OFFSET_REDUND (9 * SZ_64K)
110 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
111 #define CONFIG_ENV_IS_IN_MMC
113 #ifdef CONFIG_ENV_IS_IN_MMC
114 #define CONFIG_SUPPORT_EMMC_BOOT
115 #define CONFIG_EFI_PARTITION
116 #define CONFIG_DOS_PARTITION
117 #define CONFIG_SUPPORT_EMMC_RPMB
118 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC4 eMMC */
119 /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */
120 #define CONFIG_SYS_MMC_ENV_PART 1 /* boot0 */
123 #endif /* __CONFIG_H */