include/configs/vf610twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale Vybrid vf610twr board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 #define CONFIG_VF610
  15
  16 #define CONFIG_SYS_GENERIC_BOARD
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define CONFIG_MACH_TYPE                4146
  21
  22 #define CONFIG_SKIP_LOWLEVEL_INIT
  23
  24 /* Enable passing of ATAGs */
  25 #define CONFIG_CMDLINE_TAG
  26
  27 #define CONFIG_CMD_FUSE
  28 #ifdef CONFIG_CMD_FUSE
  29 #define CONFIG_MXC_OCOTP
  30 #endif
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  34
  35 #define CONFIG_BOARD_EARLY_INIT_F
  36
  37 #define CONFIG_FSL_LPUART
  38 #define LPUART_BASE                     UART1_BASE
  39
  40 /* Allow to overwrite serial and ethaddr */
  41 #define CONFIG_ENV_OVERWRITE
  42 #define CONFIG_SYS_UART_PORT            (1)
  43 #define CONFIG_BAUDRATE                 115200
  44
  45 /* NAND support */
  46 #define CONFIG_CMD_NAND
  47 #define CONFIG_CMD_NAND_TRIMFFS
  48 #define CONFIG_SYS_NAND_ONFI_DETECTION
  49
  50 #ifdef CONFIG_CMD_NAND
  51 #define CONFIG_USE_ARCH_MEMCPY
  52 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  53 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  54
  55 /* UBI */
  56 #define CONFIG_CMD_UBI
  57 #define CONFIG_CMD_UBIFS
  58 #define CONFIG_RBTREE
  59 #define CONFIG_LZO
  60
  61 /* Dynamic MTD partition support */
  62 #define CONFIG_CMD_MTDPARTS
  63 #define CONFIG_MTD_PARTITIONS
  64 #define CONFIG_MTD_DEVICE
  65 #define MTDIDS_DEFAULT                  "nand0=fsl_nfc"
  66 #define MTDPARTS_DEFAULT                "mtdparts=fsl_nfc:"             \
  67                                         "128k(vf-bcb)ro,"               \
  68                                         "1408k(u-boot)ro,"              \
  69                                         "512k(u-boot-env),"             \
  70                                         "4m(kernel),"                   \
  71                                         "512k(fdt),"            \
  72                                         "-(rootfs)"
  73 #endif
  74
  75 #define CONFIG_MMC
  76 #define CONFIG_FSL_ESDHC
  77 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  78 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  79
  80 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  81
  82 #define CONFIG_CMD_MMC
  83 #define CONFIG_GENERIC_MMC
  84 #define CONFIG_CMD_FAT
  85 #define CONFIG_DOS_PARTITION
  86
  87 #define CONFIG_CMD_PING
  88 #define CONFIG_CMD_DHCP
  89 #define CONFIG_CMD_MII
  90 #define CONFIG_FEC_MXC
  91 #define CONFIG_MII
  92 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  93 #define CONFIG_FEC_XCV_TYPE             RMII
  94 #define CONFIG_FEC_MXC_PHYADDR          0
  95 #define CONFIG_PHYLIB
  96 #define CONFIG_PHY_MICREL
  97
  98 /* QSPI Configs*/
  99 #define CONFIG_FSL_QSPI
 100
 101 #ifdef CONFIG_FSL_QSPI
 102 #define CONFIG_CMD_SF
 103 #define CONFIG_SPI_FLASH_SPANSION
 104 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 105 #define FSL_QSPI_FLASH_NUM              2
 106 #define CONFIG_SYS_FSL_QSPI_LE
 107 #endif
 108
 109 /* I2C Configs */
 110 #define CONFIG_CMD_I2C
 111 #define CONFIG_SYS_I2C
 112 #define CONFIG_SYS_I2C_MXC
 113 #define CONFIG_SYS_SPD_BUS_NUM          0
 114
 115 #define CONFIG_BOOTDELAY                3
 116
 117 #define CONFIG_LOADADDR                 0x82000000
 118
 119 /* We boot from the gfxRAM area of the OCRAM. */
 120 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 121 #define CONFIG_BOARD_SIZE_LIMIT         524288
 122
 123 #define CONFIG_EXTRA_ENV_SETTINGS \
 124         "script=boot.scr\0" \
 125         "image=zImage\0" \
 126         "console=ttyLP1\0" \
 127         "fdt_high=0xffffffff\0" \
 128         "initrd_high=0xffffffff\0" \
 129         "fdt_file=vf610-twr.dtb\0" \
 130         "fdt_addr=0x81000000\0" \
 131         "boot_fdt=try\0" \
 132         "ip_dyn=yes\0" \
 133         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 134         "mmcpart=1\0" \
 135         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 136         "update_sd_firmware_filename=u-boot.imx\0" \
 137         "update_sd_firmware=" \
 138                 "if test ${ip_dyn} = yes; then " \
 139                         "setenv get_cmd dhcp; " \
 140                 "else " \
 141                         "setenv get_cmd tftp; " \
 142                 "fi; " \
 143                 "if mmc dev ${mmcdev}; then "   \
 144                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 145                                 "setexpr fw_sz ${filesize} / 0x200; " \
 146                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 147                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 148                         "fi; "  \
 149                 "fi\0" \
 150         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 151                 "root=${mmcroot}\0" \
 152         "loadbootscript=" \
 153                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 154         "bootscript=echo Running bootscript from mmc ...; " \
 155                 "source\0" \
 156         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 157         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 158         "mmcboot=echo Booting from mmc ...; " \
 159                 "run mmcargs; " \
 160                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 161                         "if run loadfdt; then " \
 162                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 163                         "else " \
 164                                 "if test ${boot_fdt} = try; then " \
 165                                         "bootz; " \
 166                                 "else " \
 167                                         "echo WARN: Cannot load the DT; " \
 168                                 "fi; " \
 169                         "fi; " \
 170                 "else " \
 171                         "bootz; " \
 172                 "fi;\0" \
 173         "netargs=setenv bootargs console=${console},${baudrate} " \
 174                 "root=/dev/nfs " \
 175         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 176                 "netboot=echo Booting from net ...; " \
 177                 "run netargs; " \
 178                 "if test ${ip_dyn} = yes; then " \
 179                         "setenv get_cmd dhcp; " \
 180                 "else " \
 181                         "setenv get_cmd tftp; " \
 182                 "fi; " \
 183                 "${get_cmd} ${image}; " \
 184                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 185                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 186                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 187                         "else " \
 188                                 "if test ${boot_fdt} = try; then " \
 189                                         "bootz; " \
 190                                 "else " \
 191                                         "echo WARN: Cannot load the DT; " \
 192                                 "fi; " \
 193                         "fi; " \
 194                 "else " \
 195                         "bootz; " \
 196                 "fi;\0"
 197
 198 #define CONFIG_BOOTCOMMAND \
 199            "mmc dev ${mmcdev}; if mmc rescan; then " \
 200                    "if run loadbootscript; then " \
 201                            "run bootscript; " \
 202                    "else " \
 203                            "if run loadimage; then " \
 204                                    "run mmcboot; " \
 205                            "else run netboot; " \
 206                            "fi; " \
 207                    "fi; " \
 208            "else run netboot; fi"
 209
 210 /* Miscellaneous configurable options */
 211 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 212 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 213 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 214 #undef CONFIG_AUTO_COMPLETE
 215 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 216 #define CONFIG_SYS_PBSIZE               \
 217                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 218 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 219 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 220
 221 #define CONFIG_CMD_MEMTEST
 222 #define CONFIG_SYS_MEMTEST_START        0x80010000
 223 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 224
 225 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 226
 227 /*
 228  * Stack sizes
 229  * The stack sizes are set up in start.S using the settings below
 230  */
 231 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 232
 233 /* Physical memory map */
 234 #define CONFIG_NR_DRAM_BANKS            1
 235 #define PHYS_SDRAM                      (0x80000000)
 236 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 237
 238 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 239 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 240 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 241
 242 #define CONFIG_SYS_INIT_SP_OFFSET \
 243         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 244 #define CONFIG_SYS_INIT_SP_ADDR \
 245         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 246
 247 /* FLASH and environment organization */
 248 #define CONFIG_SYS_NO_FLASH
 249
 250 #ifdef CONFIG_ENV_IS_IN_MMC
 251 #define CONFIG_ENV_SIZE                 (8 * 1024)
 252
 253 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 254 #define CONFIG_SYS_MMC_ENV_DEV          0
 255 #endif
 256
 257 #ifdef CONFIG_ENV_IS_IN_NAND
 258 #define CONFIG_ENV_SIZE                 (64 * 2048)
 259 #define CONFIG_ENV_SECT_SIZE            (64 * 2048)
 260 #define CONFIG_ENV_RANGE                (512 * 1024)
 261 #define CONFIG_ENV_OFFSET               0x180000
 262 #endif
 263
 264 #define CONFIG_OF_LIBFDT
 265 #define CONFIG_CMD_BOOTZ
 266
 267 #endif