include/configs/vf610twr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale Vybrid vf610twr board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12
  13 #define CONFIG_SYS_FSL_CLK
  14
  15 #define CONFIG_MACH_TYPE                4146
  16
  17 #define CONFIG_SKIP_LOWLEVEL_INIT
  18
  19 /* Enable passing of ATAGs */
  20 #define CONFIG_CMDLINE_TAG
  21
  22 #ifdef CONFIG_CMD_FUSE
  23 #define CONFIG_MXC_OCOTP
  24 #endif
  25
  26 /* Size of malloc() pool */
  27 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  28
  29 /* Allow to overwrite serial and ethaddr */
  30 #define CONFIG_ENV_OVERWRITE
  31
  32 /* NAND support */
  33 #define CONFIG_SYS_NAND_ONFI_DETECTION
  34
  35 #ifdef CONFIG_CMD_NAND
  36 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  37 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  38
  39 /* Dynamic MTD partition support */
  40 #endif
  41
  42 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  43 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  44
  45 #define CONFIG_FEC_MXC
  46 #define CONFIG_MII
  47 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  48 #define CONFIG_FEC_XCV_TYPE             RMII
  49 #define CONFIG_FEC_MXC_PHYADDR          0
  50
  51 /* QSPI Configs*/
  52
  53 #ifdef CONFIG_FSL_QSPI
  54 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  55 #define FSL_QSPI_FLASH_NUM              2
  56 #define CONFIG_SYS_FSL_QSPI_LE
  57 #endif
  58
  59 /* I2C Configs */
  60 #define CONFIG_SYS_I2C
  61 #define CONFIG_SYS_I2C_MXC
  62 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  63 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  64 #define CONFIG_SYS_SPD_BUS_NUM          0
  65
  66
  67 #define CONFIG_SYS_LOAD_ADDR            0x82000000
  68
  69 /* We boot from the gfxRAM area of the OCRAM. */
  70 #define CONFIG_BOARD_SIZE_LIMIT         520192
  71
  72 /*
  73  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
  74  * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
  75  * DDR3. Hence, limit the memory range for image processing to 112MB
  76  * using bootm_size. All of the following must be within this range.
  77  * We have the default load at 32MB into DDR (for the kernel), FDT at
  78  * 64MB and the ramdisk 512KB above that (allowing for hopefully never
  79  * seen large trees). This allows a reasonable split between ramdisk
  80  * and kernel size, where the ram disk can be a bit larger.
  81  */
  82 #define MEM_LAYOUT_ENV_SETTINGS \
  83         "bootm_size=0x07000000\0" \
  84         "loadaddr=0x82000000\0" \
  85         "kernel_addr_r=0x82000000\0" \
  86         "fdt_addr=0x84000000\0" \
  87         "fdt_addr_r=0x84000000\0" \
  88         "rdaddr=0x84080000\0" \
  89         "ramdisk_addr_r=0x84080000\0"
  90
  91 #define CONFIG_EXTRA_ENV_SETTINGS \
  92         MEM_LAYOUT_ENV_SETTINGS \
  93         "script=boot.scr\0" \
  94         "image=zImage\0" \
  95         "console=ttyLP1\0" \
  96         "fdt_file=vf610-twr.dtb\0" \
  97         "boot_fdt=try\0" \
  98         "ip_dyn=yes\0" \
  99         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 100         "mmcpart=1\0" \
 101         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 102         "update_sd_firmware_filename=u-boot.imx\0" \
 103         "update_sd_firmware=" \
 104                 "if test ${ip_dyn} = yes; then " \
 105                         "setenv get_cmd dhcp; " \
 106                 "else " \
 107                         "setenv get_cmd tftp; " \
 108                 "fi; " \
 109                 "if mmc dev ${mmcdev}; then "   \
 110                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 111                                 "setexpr fw_sz ${filesize} / 0x200; " \
 112                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 113                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 114                         "fi; "  \
 115                 "fi\0" \
 116         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 117                 "root=${mmcroot}\0" \
 118         "loadbootscript=" \
 119                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 120         "bootscript=echo Running bootscript from mmc ...; " \
 121                 "source\0" \
 122         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 123         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 124         "mmcboot=echo Booting from mmc ...; " \
 125                 "run mmcargs; " \
 126                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 127                         "if run loadfdt; then " \
 128                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 129                         "else " \
 130                                 "if test ${boot_fdt} = try; then " \
 131                                         "bootz; " \
 132                                 "else " \
 133                                         "echo WARN: Cannot load the DT; " \
 134                                 "fi; " \
 135                         "fi; " \
 136                 "else " \
 137                         "bootz; " \
 138                 "fi;\0" \
 139         "netargs=setenv bootargs console=${console},${baudrate} " \
 140                 "root=/dev/nfs " \
 141         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 142                 "netboot=echo Booting from net ...; " \
 143                 "run netargs; " \
 144                 "if test ${ip_dyn} = yes; then " \
 145                         "setenv get_cmd dhcp; " \
 146                 "else " \
 147                         "setenv get_cmd tftp; " \
 148                 "fi; " \
 149                 "${get_cmd} ${image}; " \
 150                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 151                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 152                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 153                         "else " \
 154                                 "if test ${boot_fdt} = try; then " \
 155                                         "bootz; " \
 156                                 "else " \
 157                                         "echo WARN: Cannot load the DT; " \
 158                                 "fi; " \
 159                         "fi; " \
 160                 "else " \
 161                         "bootz; " \
 162                 "fi;\0"
 163
 164 #define CONFIG_BOOTCOMMAND \
 165            "mmc dev ${mmcdev}; if mmc rescan; then " \
 166                    "if run loadbootscript; then " \
 167                            "run bootscript; " \
 168                    "else " \
 169                            "if run loadimage; then " \
 170                                    "run mmcboot; " \
 171                            "else run netboot; " \
 172                            "fi; " \
 173                    "fi; " \
 174            "else run netboot; fi"
 175
 176 /* Miscellaneous configurable options */
 177
 178 #define CONFIG_SYS_MEMTEST_START        0x80010000
 179 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 180
 181 /* Physical memory map */
 182 #define CONFIG_NR_DRAM_BANKS            1
 183 #define PHYS_SDRAM                      (0x80000000)
 184 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 185
 186 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 187 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 188 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 189
 190 #define CONFIG_SYS_INIT_SP_OFFSET \
 191         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 192 #define CONFIG_SYS_INIT_SP_ADDR \
 193         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 194
 195 #ifdef CONFIG_ENV_IS_IN_MMC
 196 #define CONFIG_ENV_SIZE                 (8 * 1024)
 197
 198 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 199 #define CONFIG_SYS_MMC_ENV_DEV          0
 200 #endif
 201
 202 #ifdef CONFIG_ENV_IS_IN_NAND
 203 #define CONFIG_ENV_SIZE                 (64 * 2048)
 204 #define CONFIG_ENV_SECT_SIZE            (64 * 2048)
 205 #define CONFIG_ENV_RANGE                (512 * 1024)
 206 #define CONFIG_ENV_OFFSET               0x180000
 207 #endif
 208
 209 #endif