include/configs/vf610twr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale Vybrid vf610twr board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <linux/stringify.h>
  13
  14 #define CONFIG_SYS_FSL_CLK
  15
  16 /* NAND support */
  17 #define CONFIG_SYS_NAND_ONFI_DETECTION
  18
  19 #ifdef CONFIG_CMD_NAND
  20 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  21 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  22
  23 /* Dynamic MTD partition support */
  24 #endif
  25
  26 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  27 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  28
  29 #define CONFIG_FEC_MXC
  30 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  31 #define CONFIG_FEC_XCV_TYPE             RMII
  32 #define CONFIG_FEC_MXC_PHYADDR          0
  33
  34 /* I2C Configs */
  35 #define CONFIG_SYS_SPD_BUS_NUM          0
  36
  37 /* We boot from the gfxRAM area of the OCRAM. */
  38 #define CONFIG_BOARD_SIZE_LIMIT         520192
  39
  40 /*
  41  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
  42  * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
  43  * DDR3. Hence, limit the memory range for image processing to 112MB
  44  * using bootm_size. All of the following must be within this range.
  45  * We have the default load at 32MB into DDR (for the kernel), FDT at
  46  * 64MB and the ramdisk 512KB above that (allowing for hopefully never
  47  * seen large trees). This allows a reasonable split between ramdisk
  48  * and kernel size, where the ram disk can be a bit larger.
  49  */
  50 #define MEM_LAYOUT_ENV_SETTINGS \
  51         "bootm_size=0x07000000\0" \
  52         "loadaddr=0x82000000\0" \
  53         "kernel_addr_r=0x82000000\0" \
  54         "fdt_addr=0x84000000\0" \
  55         "fdt_addr_r=0x84000000\0" \
  56         "rdaddr=0x84080000\0" \
  57         "ramdisk_addr_r=0x84080000\0"
  58
  59 #define CONFIG_EXTRA_ENV_SETTINGS \
  60         MEM_LAYOUT_ENV_SETTINGS \
  61         "script=boot.scr\0" \
  62         "image=zImage\0" \
  63         "console=ttyLP1\0" \
  64         "fdt_file=vf610-twr.dtb\0" \
  65         "boot_fdt=try\0" \
  66         "ip_dyn=yes\0" \
  67         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  68         "mmcpart=1\0" \
  69         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  70         "update_sd_firmware_filename=u-boot.imx\0" \
  71         "update_sd_firmware=" \
  72                 "if test ${ip_dyn} = yes; then " \
  73                         "setenv get_cmd dhcp; " \
  74                 "else " \
  75                         "setenv get_cmd tftp; " \
  76                 "fi; " \
  77                 "if mmc dev ${mmcdev}; then "   \
  78                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  79                                 "setexpr fw_sz ${filesize} / 0x200; " \
  80                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  81                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  82                         "fi; "  \
  83                 "fi\0" \
  84         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  85                 "root=${mmcroot}\0" \
  86         "loadbootscript=" \
  87                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  88         "bootscript=echo Running bootscript from mmc ...; " \
  89                 "source\0" \
  90         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  91         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  92         "mmcboot=echo Booting from mmc ...; " \
  93                 "run mmcargs; " \
  94                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  95                         "if run loadfdt; then " \
  96                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  97                         "else " \
  98                                 "if test ${boot_fdt} = try; then " \
  99                                         "bootz; " \
 100                                 "else " \
 101                                         "echo WARN: Cannot load the DT; " \
 102                                 "fi; " \
 103                         "fi; " \
 104                 "else " \
 105                         "bootz; " \
 106                 "fi;\0" \
 107         "netargs=setenv bootargs console=${console},${baudrate} " \
 108                 "root=/dev/nfs " \
 109         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 110                 "netboot=echo Booting from net ...; " \
 111                 "run netargs; " \
 112                 "if test ${ip_dyn} = yes; then " \
 113                         "setenv get_cmd dhcp; " \
 114                 "else " \
 115                         "setenv get_cmd tftp; " \
 116                 "fi; " \
 117                 "${get_cmd} ${image}; " \
 118                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 119                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 120                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 121                         "else " \
 122                                 "if test ${boot_fdt} = try; then " \
 123                                         "bootz; " \
 124                                 "else " \
 125                                         "echo WARN: Cannot load the DT; " \
 126                                 "fi; " \
 127                         "fi; " \
 128                 "else " \
 129                         "bootz; " \
 130                 "fi;\0"
 131
 132 #define CONFIG_BOOTCOMMAND \
 133            "mmc dev ${mmcdev}; if mmc rescan; then " \
 134                    "if run loadbootscript; then " \
 135                            "run bootscript; " \
 136                    "else " \
 137                            "if run loadimage; then " \
 138                                    "run mmcboot; " \
 139                            "else run netboot; " \
 140                            "fi; " \
 141                    "fi; " \
 142            "else run netboot; fi"
 143
 144 /* Miscellaneous configurable options */
 145
 146 /* Physical memory map */
 147 #define PHYS_SDRAM                      (0x80000000)
 148 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 149
 150 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 151 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 152 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 153
 154 #define CONFIG_SYS_INIT_SP_OFFSET \
 155         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 156 #define CONFIG_SYS_INIT_SP_ADDR \
 157         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 158
 159 #ifdef CONFIG_ENV_IS_IN_NAND
 160 #define CONFIG_ENV_RANGE                (512 * 1024)
 161 #endif
 162
 163 #endif