include/configs/vf610twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale Vybrid vf610twr board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <config_cmd_default.h>
  14
  15 #define CONFIG_VF610
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define CONFIG_MACH_TYPE                4146
  21
  22 #define CONFIG_SKIP_LOWLEVEL_INIT
  23
  24 /* Enable passing of ATAGs */
  25 #define CONFIG_CMDLINE_TAG
  26
  27 #define CONFIG_CMD_FUSE
  28 #ifdef CONFIG_CMD_FUSE
  29 #define CONFIG_MXC_OCOTP
  30 #endif
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  34
  35 #define CONFIG_BOARD_EARLY_INIT_F
  36
  37 #define CONFIG_FSL_LPUART
  38 #define LPUART_BASE                     UART1_BASE
  39
  40 /* Allow to overwrite serial and ethaddr */
  41 #define CONFIG_ENV_OVERWRITE
  42 #define CONFIG_SYS_UART_PORT            (1)
  43 #define CONFIG_BAUDRATE                 115200
  44
  45 #undef CONFIG_CMD_IMLS
  46
  47 #define CONFIG_MMC
  48 #define CONFIG_FSL_ESDHC
  49 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  50 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  51
  52 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  53
  54 #define CONFIG_CMD_MMC
  55 #define CONFIG_GENERIC_MMC
  56 #define CONFIG_CMD_FAT
  57 #define CONFIG_DOS_PARTITION
  58
  59 #define CONFIG_CMD_PING
  60 #define CONFIG_CMD_DHCP
  61 #define CONFIG_CMD_MII
  62 #define CONFIG_CMD_NET
  63 #define CONFIG_FEC_MXC
  64 #define CONFIG_MII
  65 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  66 #define CONFIG_FEC_XCV_TYPE             RMII
  67 #define CONFIG_FEC_MXC_PHYADDR          0
  68 #define CONFIG_PHYLIB
  69 #define CONFIG_PHY_MICREL
  70
  71 /* QSPI Configs*/
  72 #define CONFIG_FSL_QSPI
  73
  74 #ifdef CONFIG_FSL_QSPI
  75 #define CONFIG_CMD_SF
  76 #define CONFIG_SPI_FLASH
  77 #define CONFIG_SPI_FLASH_SPANSION
  78 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  79 #define FSL_QSPI_FLASH_NUM              2
  80 #define CONFIG_SYS_FSL_QSPI_LE
  81 #endif
  82
  83 /* I2C Configs */
  84 #define CONFIG_CMD_I2C
  85 #define CONFIG_SYS_I2C
  86 #define CONFIG_SYS_I2C_MXC
  87 #define CONFIG_SYS_SPD_BUS_NUM          0
  88
  89 #define CONFIG_BOOTDELAY                3
  90
  91 #define CONFIG_LOADADDR                 0x82000000
  92 #define CONFIG_SYS_TEXT_BASE            0x3f008000
  93
  94 #define CONFIG_EXTRA_ENV_SETTINGS \
  95         "script=boot.scr\0" \
  96         "image=zImage\0" \
  97         "console=ttyLP1\0" \
  98         "fdt_high=0xffffffff\0" \
  99         "initrd_high=0xffffffff\0" \
 100         "fdt_file=vf610-twr.dtb\0" \
 101         "fdt_addr=0x81000000\0" \
 102         "boot_fdt=try\0" \
 103         "ip_dyn=yes\0" \
 104         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 105         "mmcpart=1\0" \
 106         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 107         "update_sd_firmware_filename=u-boot.imx\0" \
 108         "update_sd_firmware=" \
 109                 "if test ${ip_dyn} = yes; then " \
 110                         "setenv get_cmd dhcp; " \
 111                 "else " \
 112                         "setenv get_cmd tftp; " \
 113                 "fi; " \
 114                 "if mmc dev ${mmcdev}; then "   \
 115                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 116                                 "setexpr fw_sz ${filesize} / 0x200; " \
 117                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 118                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 119                         "fi; "  \
 120                 "fi\0" \
 121         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 122                 "root=${mmcroot}\0" \
 123         "loadbootscript=" \
 124                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 125         "bootscript=echo Running bootscript from mmc ...; " \
 126                 "source\0" \
 127         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 128         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 129         "mmcboot=echo Booting from mmc ...; " \
 130                 "run mmcargs; " \
 131                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 132                         "if run loadfdt; then " \
 133                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 134                         "else " \
 135                                 "if test ${boot_fdt} = try; then " \
 136                                         "bootz; " \
 137                                 "else " \
 138                                         "echo WARN: Cannot load the DT; " \
 139                                 "fi; " \
 140                         "fi; " \
 141                 "else " \
 142                         "bootz; " \
 143                 "fi;\0" \
 144         "netargs=setenv bootargs console=${console},${baudrate} " \
 145                 "root=/dev/nfs " \
 146         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 147                 "netboot=echo Booting from net ...; " \
 148                 "run netargs; " \
 149                 "if test ${ip_dyn} = yes; then " \
 150                         "setenv get_cmd dhcp; " \
 151                 "else " \
 152                         "setenv get_cmd tftp; " \
 153                 "fi; " \
 154                 "${get_cmd} ${image}; " \
 155                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 156                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 157                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 158                         "else " \
 159                                 "if test ${boot_fdt} = try; then " \
 160                                         "bootz; " \
 161                                 "else " \
 162                                         "echo WARN: Cannot load the DT; " \
 163                                 "fi; " \
 164                         "fi; " \
 165                 "else " \
 166                         "bootz; " \
 167                 "fi;\0"
 168
 169 #define CONFIG_BOOTCOMMAND \
 170            "mmc dev ${mmcdev}; if mmc rescan; then " \
 171                    "if run loadbootscript; then " \
 172                            "run bootscript; " \
 173                    "else " \
 174                            "if run loadimage; then " \
 175                                    "run mmcboot; " \
 176                            "else run netboot; " \
 177                            "fi; " \
 178                    "fi; " \
 179            "else run netboot; fi"
 180
 181 /* Miscellaneous configurable options */
 182 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 183 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 184 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 185 #undef CONFIG_AUTO_COMPLETE
 186 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 187 #define CONFIG_SYS_PBSIZE               \
 188                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 189 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 190 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 191
 192 #define CONFIG_CMD_MEMTEST
 193 #define CONFIG_SYS_MEMTEST_START        0x80010000
 194 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 195
 196 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 197
 198 /*
 199  * Stack sizes
 200  * The stack sizes are set up in start.S using the settings below
 201  */
 202 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 203
 204 /* Physical memory map */
 205 #define CONFIG_NR_DRAM_BANKS            1
 206 #define PHYS_SDRAM                      (0x80000000)
 207 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 208
 209 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 210 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 211 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 212
 213 #define CONFIG_SYS_INIT_SP_OFFSET \
 214         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 215 #define CONFIG_SYS_INIT_SP_ADDR \
 216         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 217
 218 /* FLASH and environment organization */
 219 #define CONFIG_SYS_NO_FLASH
 220
 221 #define CONFIG_ENV_SIZE                 (8 * 1024)
 222 #define CONFIG_ENV_IS_IN_MMC
 223
 224 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 225 #define CONFIG_SYS_MMC_ENV_DEV          0
 226
 227 #define CONFIG_OF_LIBFDT
 228 #define CONFIG_CMD_BOOTZ
 229
 230 #endif