include/configs/vexpress_aemv8a.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuration for Versatile Express. Parts were derived from other ARM
   4  *   configurations.
   5  */
   6
   7 #ifndef __VEXPRESS_AEMV8A_H
   8 #define __VEXPRESS_AEMV8A_H
   9
  10 #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
  11 #ifndef CONFIG_SEMIHOSTING
  12 #error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
  13 #endif
  14 #define CONFIG_ARMV8_SWITCH_TO_EL1
  15 #endif
  16
  17 #define CONFIG_REMAKE_ELF
  18
  19 /* Link Definitions */
  20 #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
  21         defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
  22 /* ATF loads u-boot here for BASE_FVP model */
  23 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
  24 #elif CONFIG_TARGET_VEXPRESS64_JUNO
  25 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  26 #endif
  27
  28 #define CONFIG_SYS_BOOTM_LEN (64 << 20)      /* Increase max gunzip size */
  29
  30 /* CS register bases for the original memory map. */
  31 #define V2M_PA_CS0                      0x00000000
  32 #define V2M_PA_CS1                      0x14000000
  33 #define V2M_PA_CS2                      0x18000000
  34 #define V2M_PA_CS3                      0x1c000000
  35 #define V2M_PA_CS4                      0x0c000000
  36 #define V2M_PA_CS5                      0x10000000
  37
  38 #define V2M_PERIPH_OFFSET(x)            (x << 16)
  39 #define V2M_SYSREGS                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
  40 #define V2M_SYSCTL                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
  41 #define V2M_SERIAL_BUS_PCI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
  42
  43 #define V2M_BASE                        0x80000000
  44
  45 /* Common peripherals relative to CS7. */
  46 #define V2M_AACI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
  47 #define V2M_MMCI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
  48 #define V2M_KMI0                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
  49 #define V2M_KMI1                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
  50
  51 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
  52 #define V2M_UART0                       0x7ff80000
  53 #define V2M_UART1                       0x7ff70000
  54 #else /* Not Juno */
  55 #define V2M_UART0                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
  56 #define V2M_UART1                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
  57 #define V2M_UART2                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
  58 #define V2M_UART3                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
  59 #endif
  60
  61 #define V2M_WDT                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
  62
  63 #define V2M_TIMER01                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
  64 #define V2M_TIMER23                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
  65
  66 #define V2M_SERIAL_BUS_DVI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
  67 #define V2M_RTC                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
  68
  69 #define V2M_CF                          (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
  70
  71 #define V2M_CLCD                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
  72
  73 /* System register offsets. */
  74 #define V2M_SYS_CFGDATA                 (V2M_SYSREGS + 0x0a0)
  75 #define V2M_SYS_CFGCTRL                 (V2M_SYSREGS + 0x0a4)
  76 #define V2M_SYS_CFGSTAT                 (V2M_SYSREGS + 0x0a8)
  77
  78 /* Generic Timer Definitions */
  79 #define COUNTER_FREQUENCY               (0x1800000)     /* 24MHz */
  80
  81 /* Generic Interrupt Controller Definitions */
  82 #ifdef CONFIG_GICV3
  83 #define GICD_BASE                       (0x2f000000)
  84 #define GICR_BASE                       (0x2f100000)
  85 #else
  86
  87 #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
  88         defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
  89 #define GICD_BASE                       (0x2f000000)
  90 #define GICC_BASE                       (0x2c000000)
  91 #elif CONFIG_TARGET_VEXPRESS64_JUNO
  92 #define GICD_BASE                       (0x2C010000)
  93 #define GICC_BASE                       (0x2C02f000)
  94 #endif
  95 #endif /* !CONFIG_GICV3 */
  96
  97 /* Size of malloc() pool */
  98 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (8 << 20))
  99
 100 #ifndef CONFIG_TARGET_VEXPRESS64_JUNO
 101 /* The Vexpress64 simulators use SMSC91C111 */
 102 #define CONFIG_SMC91111                 1
 103 #define CONFIG_SMC91111_BASE            (0x01A000000)
 104 #endif
 105
 106 /* PL011 Serial Configuration */
 107 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 108 #define CONFIG_PL011_CLOCK              7273800
 109 #else
 110 #define CONFIG_PL011_CLOCK              24000000
 111 #endif
 112
 113 /*#define CONFIG_MENU_SHOW*/
 114
 115 /* BOOTP options */
 116 #define CONFIG_BOOTP_BOOTFILESIZE
 117
 118 /* Miscellaneous configurable options */
 119 #define CONFIG_SYS_LOAD_ADDR            (V2M_BASE + 0x10000000)
 120
 121 /* Physical Memory Map */
 122 #define PHYS_SDRAM_1                    (V2M_BASE)      /* SDRAM Bank #1 */
 123 /* Top 16MB reserved for secure world use */
 124 #define DRAM_SEC_SIZE           0x01000000
 125 #define PHYS_SDRAM_1_SIZE       0x80000000 - DRAM_SEC_SIZE
 126 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
 127
 128 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 129 #define PHYS_SDRAM_2                    (0x880000000)
 130 #define PHYS_SDRAM_2_SIZE               0x180000000
 131 #endif
 132
 133 /* Enable memtest */
 134 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
 135 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
 136
 137 /* Initial environment variables */
 138 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 139 /*
 140  * Defines where the kernel and FDT exist in NOR flash and where it will
 141  * be copied into DRAM
 142  */
 143 #define CONFIG_EXTRA_ENV_SETTINGS       \
 144                                 "kernel_name=norkern\0" \
 145                                 "kernel_alt_name=Image\0"       \
 146                                 "kernel_addr=0x80080000\0" \
 147                                 "initrd_name=ramdisk.img\0"     \
 148                                 "initrd_addr=0x84000000\0"      \
 149                                 "fdtfile=board.dtb\0" \
 150                                 "fdt_alt_name=juno\0" \
 151                                 "fdt_addr=0x83000000\0" \
 152                                 "fdt_high=0xffffffffffffffff\0" \
 153                                 "initrd_high=0xffffffffffffffff\0" \
 154
 155 /* Copy the kernel and FDT to DRAM memory and boot */
 156 #define CONFIG_BOOTCOMMAND      "afs load ${kernel_name} ${kernel_addr} ; " \
 157                                 "if test $? -eq 1; then "\
 158                                 "  echo Loading ${kernel_alt_name} instead of "\
 159                                 "${kernel_name}; "\
 160                                 "  afs load ${kernel_alt_name} ${kernel_addr};"\
 161                                 "fi ; "\
 162                                 "afs load  ${fdtfile} ${fdt_addr} ; " \
 163                                 "if test $? -eq 1; then "\
 164                                 "  echo Loading ${fdt_alt_name} instead of "\
 165                                 "${fdtfile}; "\
 166                                 "  afs load ${fdt_alt_name} ${fdt_addr}; "\
 167                                 "fi ; "\
 168                                 "fdt addr ${fdt_addr}; fdt resize; " \
 169                                 "if afs load  ${initrd_name} ${initrd_addr} ; "\
 170                                 "then "\
 171                                 "  setenv initrd_param ${initrd_addr}; "\
 172                                 "  else setenv initrd_param -; "\
 173                                 "fi ; " \
 174                                 "booti ${kernel_addr} ${initrd_param} ${fdt_addr}"
 175
 176
 177 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
 178 #define CONFIG_EXTRA_ENV_SETTINGS       \
 179                                 "kernel_name=Image\0"           \
 180                                 "kernel_addr=0x80080000\0"      \
 181                                 "initrd_name=ramdisk.img\0"     \
 182                                 "initrd_addr=0x88000000\0"      \
 183                                 "fdtfile=devtree.dtb\0"         \
 184                                 "fdt_addr=0x83000000\0"         \
 185                                 "fdt_high=0xffffffffffffffff\0" \
 186                                 "initrd_high=0xffffffffffffffff\0"
 187
 188 #define CONFIG_BOOTCOMMAND      "smhload ${kernel_name} ${kernel_addr}; " \
 189                                 "smhload ${fdtfile} ${fdt_addr}; " \
 190                                 "smhload ${initrd_name} ${initrd_addr} "\
 191                                 "initrd_end; " \
 192                                 "fdt addr ${fdt_addr}; fdt resize; " \
 193                                 "fdt chosen ${initrd_addr} ${initrd_end}; " \
 194                                 "booti $kernel_addr - $fdt_addr"
 195
 196
 197 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
 198 #define CONFIG_EXTRA_ENV_SETTINGS       \
 199                                 "kernel_addr=0x80080000\0"      \
 200                                 "initrd_addr=0x84000000\0"      \
 201                                 "fdt_addr=0x83000000\0"         \
 202                                 "fdt_high=0xffffffffffffffff\0" \
 203                                 "initrd_high=0xffffffffffffffff\0"
 204
 205 #define CONFIG_BOOTCOMMAND      "booti $kernel_addr $initrd_addr $fdt_addr"
 206
 207
 208 #endif
 209
 210 /* Monitor Command Prompt */
 211 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 212 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 213
 214 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 215 #define CONFIG_SYS_FLASH_BASE           0x08000000
 216 /* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
 217 #define CONFIG_SYS_MAX_FLASH_SECT       259
 218 /* Store environment at top of flash in the same location as blank.img */
 219 /* in the Juno firmware. */
 220 #define CONFIG_ENV_ADDR                 0x0BFC0000
 221 #define CONFIG_ENV_SECT_SIZE            0x00010000
 222 #else
 223 #define CONFIG_SYS_FLASH_BASE           0x0C000000
 224 /* 256 x 256KiB sectors */
 225 #define CONFIG_SYS_MAX_FLASH_SECT       256
 226 /* Store environment at top of flash */
 227 #define CONFIG_ENV_ADDR                 0x0FFC0000
 228 #define CONFIG_ENV_SECT_SIZE            0x00040000
 229 #endif
 230
 231 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 232 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 233
 234 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* flinfo indicates empty blocks */
 235 #define FLASH_MAX_SECTOR_SIZE           0x00040000
 236 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 237
 238 #endif /* __VEXPRESS_AEMV8A_H */