Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
[platform/kernel/u-boot.git] / include / configs / verdin-imx8mm.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2020 Toradex
4  */
5
6 #ifndef __VERDIN_IMX8MM_H
7 #define __VERDIN_IMX8MM_H
8
9 #include <asm/arch/imx-regs.h>
10 #include <linux/sizes.h>
11
12 #define CONFIG_SPL_MAX_SIZE             (148 * 1024)
13 #define CONFIG_SYS_MONITOR_LEN          SZ_512K
14 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
15 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
16 #define CONFIG_SYS_UBOOT_BASE   \
17         (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
18
19 #ifdef CONFIG_SPL_BUILD
20 #define CONFIG_SPL_STACK                0x920000
21 #define CONFIG_SPL_BSS_START_ADDR       0x910000
22 #define CONFIG_SPL_BSS_MAX_SIZE         SZ_8K   /* 8 KB */
23 #define CONFIG_SYS_SPL_MALLOC_START     0x42200000
24 #define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_512K /* 512 KB */
25
26 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
27 #define CONFIG_MALLOC_F_ADDR            0x930000
28 /* For RAW image gives a error info not panic */
29 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
30 #endif
31
32 #define MEM_LAYOUT_ENV_SETTINGS \
33         "fdt_addr_r=0x44000000\0" \
34         "kernel_addr_r=0x42000000\0" \
35         "ramdisk_addr_r=0x46400000\0" \
36         "scriptaddr=0x46000000\0"
37
38 #define CONFIG_LOADADDR         0x40480000
39 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
40
41 /* Enable Distro Boot */
42 #ifndef CONFIG_SPL_BUILD
43 #define BOOT_TARGET_DEVICES(func) \
44         func(MMC, mmc, 1) \
45         func(MMC, mmc, 0) \
46         func(DHCP, dhcp, na)
47 #include <config_distro_bootcmd.h>
48 #undef CONFIG_ISO_PARTITION
49 #else
50 #define BOOTENV
51 #endif
52
53 /* Initial environment variables */
54 #define CONFIG_EXTRA_ENV_SETTINGS \
55         BOOTENV \
56         MEM_LAYOUT_ENV_SETTINGS \
57         "bootcmd_mfg=fastboot 0\0" \
58         "console=ttymxc0\0" \
59         "fdt_addr=0x43000000\0" \
60         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
61         "initrd_addr=0x43800000\0" \
62         "initrd_high=0xffffffffffffffff\0" \
63         "kernel_image=Image\0" \
64         "netargs=setenv bootargs console=${console},${baudrate} " \
65                 "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
66                 "\0" \
67         "nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
68                 "tftp ${fdt_addr} verdin/${fdtfile}; " \
69                 "booti ${loadaddr} - ${fdt_addr}\0" \
70         "setup=setenv setupargs console=${console},${baudrate} " \
71                 "console=tty1 consoleblank=0 earlycon\0" \
72         "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
73                 "if test \"$confirm\" = \"y\"; then " \
74                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
75                 "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x2 " \
76                 "${blkcnt}; fi\0"
77
78 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
79 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
80 #define CONFIG_SYS_INIT_SP_OFFSET \
81         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
82 #define CONFIG_SYS_INIT_SP_ADDR \
83         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
84
85 #if defined(CONFIG_ENV_IS_IN_MMC)
86 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
87 #endif
88
89 /* Size of malloc() pool */
90 #define CONFIG_SYS_MALLOC_LEN           SZ_32M
91 #define CONFIG_SYS_SDRAM_BASE           0x40000000
92
93 /* SDRAM configuration */
94 #define PHYS_SDRAM                      0x40000000
95 #define PHYS_SDRAM_SIZE                 SZ_2G /* 2GB DDR */
96
97 /* UART */
98 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
99
100 /* Monitor Command Prompt */
101 #define CONFIG_SYS_CBSIZE               SZ_2K
102 #define CONFIG_SYS_MAXARGS              64
103 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
104 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
105                                         sizeof(CONFIG_SYS_PROMPT) + 16)
106 /* USDHC */
107 #define CONFIG_FSL_USDHC
108 #define CONFIG_SYS_FSL_USDHC_NUM        2
109 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
110 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
111 #define CONFIG_SYS_I2C_SPEED            100000
112
113 /* ENET */
114 #define CONFIG_ETHPRIME                 "FEC"
115 #define CONFIG_FEC_XCV_TYPE             RGMII
116 #define CONFIG_FEC_MXC_PHYADDR          7
117 #define FEC_QUIRK_ENET_MAC
118 #define IMX_FEC_BASE                    0x30BE0000
119
120 #endif /*_VERDIN_IMX8MM_H */
121