include/configs/ve8313.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006.
   3  *
   4  * (C) Copyright 2010
   5  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 /*
  10  * ve8313 board configuration file
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_E300             1
  20 #define CONFIG_MPC831x          1
  21 #define CONFIG_MPC8313          1
  22 #define CONFIG_VE8313           1
  23
  24 #ifndef CONFIG_SYS_TEXT_BASE
  25 #define CONFIG_SYS_TEXT_BASE    0xfe000000
  26 #endif
  27
  28 #define CONFIG_PCI_INDIRECT_BRIDGE 1
  29 #define CONFIG_FSL_ELBC         1
  30
  31 /*
  32  * On-board devices
  33  *
  34  */
  35 #define CONFIG_83XX_CLKIN       32000000        /* in Hz */
  36
  37 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
  38
  39 #define CONFIG_SYS_IMMR         0xE0000000
  40
  41 #define CONFIG_SYS_MEMTEST_START        0x00001000
  42 #define CONFIG_SYS_MEMTEST_END          0x07000000
  43
  44 #define CONFIG_SYS_ACR_PIPE_DEP         3       /* Arbiter pipeline depth */
  45 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count */
  46
  47 /*
  48  * Device configurations
  49  */
  50
  51 /*
  52  * DDR Setup
  53  */
  54 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
  55 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  56 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  57
  58 /*
  59  * Manually set up DDR parameters, as this board does not
  60  * have the SPD connected to I2C.
  61  */
  62 #define CONFIG_SYS_DDR_SIZE     128     /* MB */
  63 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
  64                                 | CSCONFIG_AP \
  65                                 | CSCONFIG_ODT_RD_NEVER \
  66                                 | CSCONFIG_ODT_WR_ALL \
  67                                 | CSCONFIG_ROW_BIT_13 \
  68                                 | CSCONFIG_COL_BIT_10)
  69                                 /* 0x80840102 */
  70
  71 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
  72 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
  73                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
  74                                 | (3 << TIMING_CFG0_RRT_SHIFT) \
  75                                 | (2 << TIMING_CFG0_WWT_SHIFT) \
  76                                 | (7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
  77                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
  78                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
  79                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
  80                                 /* 0x0e720802 */
  81 #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
  82                                 | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
  83                                 | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
  84                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
  85                                 | (6 << TIMING_CFG1_REFREC_SHIFT) \
  86                                 | (2 << TIMING_CFG1_WRREC_SHIFT) \
  87                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
  88                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
  89                                 /* 0x26256222 */
  90 #define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
  91                                 | (5 << TIMING_CFG2_CPO_SHIFT) \
  92                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
  93                                 | (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
  94                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
  95                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
  96                                 | (7 << TIMING_CFG2_FOUR_ACT_SHIFT))
  97                                 /* 0x029028c7 */
  98 #define CONFIG_SYS_DDR_INTERVAL ((0x320 << SDRAM_INTERVAL_REFINT_SHIFT) \
  99                                 | (0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 100                                 /* 0x03202000 */
 101 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 102                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 103                                 | SDRAM_CFG_DBW_32)
 104                                 /* 0x43080000 */
 105 #define CONFIG_SYS_SDRAM_CFG2   0x00401000
 106 #define CONFIG_SYS_DDR_MODE     ((0x4440 << SDRAM_MODE_ESD_SHIFT) \
 107                                 | (0x0232 << SDRAM_MODE_SD_SHIFT))
 108                                 /* 0x44400232 */
 109 #define CONFIG_SYS_DDR_MODE_2   0x8000C000
 110
 111 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 112                                 /*0x02000000*/
 113 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
 114                                 | DDRCDR_PZ_NOMZ \
 115                                 | DDRCDR_NZ_NOMZ \
 116                                 | DDRCDR_M_ODR)
 117                                 /* 0x73000002 */
 118
 119 /*
 120  * FLASH on the Local Bus
 121  */
 122 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 123 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 124 #define CONFIG_SYS_FLASH_BASE           0xFE000000
 125 #define CONFIG_SYS_FLASH_SIZE           32      /* size in MB */
 126 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* display empty sectors */
 127 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* buffer up multiple bytes */
 128
 129 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE \
 130                                         | BR_PS_16      /* 16 bit */ \
 131                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 132                                         | BR_V)         /* valid */
 133 #define CONFIG_SYS_NOR_OR_PRELIM        (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 134                                         | OR_GPCM_CSNT \
 135                                         | OR_GPCM_ACS_DIV4 \
 136                                         | OR_GPCM_SCY_5 \
 137                                         | OR_GPCM_TRLX_SET \
 138                                         | OR_GPCM_EAD)
 139                                         /* 0xfe000c55 */
 140
 141 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 142 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
 143
 144 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 145 #define CONFIG_SYS_MAX_FLASH_SECT       256             /* sectors per dev */
 146
 147 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 148 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 149
 150 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 151
 152 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 153 #define CONFIG_SYS_RAMBOOT
 154 #endif
 155
 156 #define CONFIG_SYS_INIT_RAM_LOCK        1
 157 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000 /* Initial RAM address */
 158 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 159
 160 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 161                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 162 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 163
 164 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 165 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024)
 166 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
 167
 168 /*
 169  * Local Bus LCRR and LBCR regs
 170  */
 171 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_3
 172 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_2
 173
 174 #define CONFIG_SYS_LBC_LBCR     0x00040000
 175
 176 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 177
 178 /*
 179  * NAND settings
 180  */
 181 #define CONFIG_SYS_NAND_BASE            0x61000000
 182 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 183 #define CONFIG_CMD_NAND 1
 184 #define CONFIG_NAND_FSL_ELBC 1
 185 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 186
 187 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE \
 188                                         | BR_PS_8               \
 189                                         | BR_DECC_CHK_GEN       \
 190                                         | BR_MS_FCM             \
 191                                         | BR_V) /* valid */
 192                                         /* 0x61000c21 */
 193 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB \
 194                                         | OR_FCM_BCTLD \
 195                                         | OR_FCM_CHT \
 196                                         | OR_FCM_SCY_2 \
 197                                         | OR_FCM_RST \
 198                                         | OR_FCM_TRLX)
 199                                         /* 0xffff90ac */
 200
 201 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 202 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 203 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 204 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 205
 206 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 207 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 208
 209 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 210 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 211
 212 /* CS2 NvRAM */
 213 #define CONFIG_SYS_BR2_PRELIM   (0x60000000 \
 214                                 | BR_PS_8 \
 215                                 | BR_V)
 216                                 /* 0x60000801 */
 217 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_128KB \
 218                                 | OR_GPCM_CSNT \
 219                                 | OR_GPCM_XACS \
 220                                 | OR_GPCM_SCY_3 \
 221                                 | OR_GPCM_TRLX_SET \
 222                                 | OR_GPCM_EHTR_SET \
 223                                 | OR_GPCM_EAD)
 224                                 /* 0xfffe0937 */
 225 /* local bus read write buffer mapping SRAM@0x64000000 */
 226 #define CONFIG_SYS_BR3_PRELIM   (0x62000000 \
 227                                 | BR_PS_16 \
 228                                 | BR_V)
 229                                 /* 0x62001001 */
 230
 231 #define CONFIG_SYS_OR3_PRELIM   (OR_AM_32MB \
 232                                 | OR_GPCM_CSNT \
 233                                 | OR_GPCM_XACS \
 234                                 | OR_GPCM_SCY_15 \
 235                                 | OR_GPCM_TRLX_SET \
 236                                 | OR_GPCM_EHTR_SET \
 237                                 | OR_GPCM_EAD)
 238                                 /* 0xfe0009f7 */
 239
 240 /*
 241  * Serial Port
 242  */
 243 #define CONFIG_CONS_INDEX       1
 244 #define CONFIG_SYS_NS16550_SERIAL
 245 #define CONFIG_SYS_NS16550_REG_SIZE     1
 246 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 247
 248 #define CONFIG_SYS_BAUDRATE_TABLE       \
 249         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 250
 251 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 252 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 253
 254 #if defined(CONFIG_PCI)
 255 /*
 256  * General PCI
 257  * Addresses are mapped 1-1.
 258  */
 259 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 260 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 261 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 262 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 263 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 264 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 265 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 266 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 267 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 268
 269 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
 270 #endif
 271
 272 /*
 273  * TSEC
 274  */
 275 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 276
 277 #define CONFIG_TSEC1
 278 #ifdef CONFIG_TSEC1
 279 #define CONFIG_HAS_ETH0
 280 #define CONFIG_TSEC1_NAME       "TSEC1"
 281 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 282 #define TSEC1_PHY_ADDR          0x01
 283 #define TSEC1_FLAGS             0
 284 #define TSEC1_PHYIDX            0
 285 #endif
 286
 287 /* Options are: TSEC[0-1] */
 288 #define CONFIG_ETHPRIME                 "TSEC1"
 289
 290 /*
 291  * Environment
 292  */
 293 #define CONFIG_ENV_IS_IN_FLASH  1
 294 #define CONFIG_ENV_ADDR         \
 295                         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 296 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 297 #define CONFIG_ENV_SIZE         0x4000
 298 /* Address and size of Redundant Environment Sector */
 299 #define CONFIG_ENV_OFFSET_REDUND        \
 300                         (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
 301 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 302
 303 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 304 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 305
 306 /*
 307  * BOOTP options
 308  */
 309 #define CONFIG_BOOTP_BOOTFILESIZE
 310 #define CONFIG_BOOTP_BOOTPATH
 311 #define CONFIG_BOOTP_GATEWAY
 312 #define CONFIG_BOOTP_HOSTNAME
 313
 314 /*
 315  * Command line configuration.
 316  */
 317 #define CONFIG_CMD_PCI
 318
 319 #define CONFIG_CMDLINE_EDITING 1
 320 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 321
 322 /*
 323  * Miscellaneous configurable options
 324  */
 325 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 326 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 327 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 328
 329 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 330 #define CONFIG_SYS_MAXARGS      16              /* max number of cmd args */
 331 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
 332
 333 /*
 334  * For booting Linux, the board info and command line data
 335  * have to be in the first 256 MB of memory, since this is
 336  * the maximum mapped by the Linux kernel during initialization.
 337  */
 338                                 /* Initial Memory map for Linux*/
 339 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 340
 341 /* 0x64050000 */
 342 #define CONFIG_SYS_HRCW_LOW (\
 343         0x20000000 /* reserved, must be set */ |\
 344         HRCWL_DDRCM |\
 345         HRCWL_CSB_TO_CLKIN_4X1 | \
 346         HRCWL_CORE_TO_CSB_2_5X1)
 347
 348 /* 0xa0600004 */
 349 #define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \
 350         HRCWH_PCI_ARBITER_ENABLE | \
 351         HRCWH_CORE_ENABLE | \
 352         HRCWH_FROM_0X00000100 | \
 353         HRCWH_BOOTSEQ_DISABLE |\
 354         HRCWH_SW_WATCHDOG_DISABLE |\
 355         HRCWH_ROM_LOC_LOCAL_16BIT | \
 356         HRCWH_TSEC1M_IN_MII | \
 357         HRCWH_BIG_ENDIAN | \
 358         HRCWH_LALE_EARLY)
 359
 360 /* System IO Config */
 361 #define CONFIG_SYS_SICRH        (0x01000000 | \
 362                                 SICRH_ETSEC2_B | \
 363                                 SICRH_ETSEC2_C | \
 364                                 SICRH_ETSEC2_D | \
 365                                 SICRH_ETSEC2_E | \
 366                                 SICRH_ETSEC2_F | \
 367                                 SICRH_ETSEC2_G | \
 368                                 SICRH_TSOBI1 | \
 369                                 SICRH_TSOBI2)
 370                                 /* 0x010fff03 */
 371 #define CONFIG_SYS_SICRL        (SICRL_LBC | \
 372                                 SICRL_SPI_A | \
 373                                 SICRL_SPI_B | \
 374                                 SICRL_SPI_C | \
 375                                 SICRL_SPI_D | \
 376                                 SICRL_ETSEC2_A)
 377                                 /* 0x33fc0003) */
 378
 379 #define CONFIG_SYS_HID0_INIT    0x000000000
 380 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 381                                  HID0_ENABLE_INSTRUCTION_CACHE)
 382
 383 #define CONFIG_SYS_HID2 HID2_HBE
 384
 385 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 386
 387 /* DDR @ 0x00000000 */
 388 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
 389 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 390                                 | BATU_BL_256M \
 391                                 | BATU_VS \
 392                                 | BATU_VP)
 393
 394 #if defined(CONFIG_PCI)
 395 /* PCI @ 0x80000000 */
 396 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
 397 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 398                                 | BATU_BL_256M \
 399                                 | BATU_VS \
 400                                 | BATU_VP)
 401 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 402                                 | BATL_PP_RW \
 403                                 | BATL_CACHEINHIBIT \
 404                                 | BATL_GUARDEDSTORAGE)
 405 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 406                                 | BATU_BL_256M \
 407                                 | BATU_VS \
 408                                 | BATU_VP)
 409 #else
 410 #define CONFIG_SYS_IBAT1L       (0)
 411 #define CONFIG_SYS_IBAT1U       (0)
 412 #define CONFIG_SYS_IBAT2L       (0)
 413 #define CONFIG_SYS_IBAT2U       (0)
 414 #endif
 415
 416 /* PCI2 not supported on 8313 */
 417 #define CONFIG_SYS_IBAT3L       (0)
 418 #define CONFIG_SYS_IBAT3U       (0)
 419 #define CONFIG_SYS_IBAT4L       (0)
 420 #define CONFIG_SYS_IBAT4U       (0)
 421
 422 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 423 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 424                                 | BATL_PP_RW \
 425                                 | BATL_CACHEINHIBIT \
 426                                 | BATL_GUARDEDSTORAGE)
 427 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 428                                 | BATU_BL_256M \
 429                                 | BATU_VS \
 430                                 | BATU_VP)
 431
 432 /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 433 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 434 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 435
 436 /*  FPGA, SRAM, NAND @ 0x60000000 */
 437 #define CONFIG_SYS_IBAT7L       (0x60000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 438 #define CONFIG_SYS_IBAT7U       (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 439
 440 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 441 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 442 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 443 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 444 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 445 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 446 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 447 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 448 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 449 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 450 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 451 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 452 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 453 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 454 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 455 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 456
 457 #define CONFIG_NETDEV           eth0
 458
 459 #define CONFIG_HOSTNAME         ve8313
 460 #define CONFIG_UBOOTPATH        ve8313/u-boot.bin
 461
 462 #define CONFIG_EXTRA_ENV_SETTINGS \
 463         "netdev=" __stringify(CONFIG_NETDEV) "\0"                       \
 464         "ethprime=" __stringify(CONFIG_TSEC1_NAME) "\0"                 \
 465         "u-boot=" __stringify(CONFIG_UBOOTPATH) "\0"                    \
 466         "u-boot_addr_r=100000\0"                                        \
 467         "load=tftp ${u-boot_addr_r} ${u-boot}\0"                        \
 468         "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE)        \
 469                 " +${filesize};"        \
 470         "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};"    \
 471         "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE)     \
 472         " ${filesize};"                                                 \
 473         "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \
 474
 475 #endif  /* __CONFIG_H */