include/configs/usbarmory.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * USB armory MkI board configuration settings
   4  * http://inversepath.com/usbarmory
   5  *
   6  * Copyright (C) 2015, Inverse Path
   7  * Andrej Rosano <andrej@inversepath.com>
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_FSL_CLK
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 /* U-Boot environment */
  18
  19 /* U-Boot general configurations */
  20 #define CONFIG_SYS_CBSIZE       512
  21
  22 /* UART */
  23 #define CONFIG_MXC_UART_BASE    UART1_BASE
  24
  25 /* SD/MMC */
  26 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  27 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  28
  29 /* USB */
  30 #define CONFIG_MXC_USB_PORT     1
  31 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  32 #define CONFIG_MXC_USB_FLAGS    0
  33
  34 /* Fuse */
  35 #define CONFIG_FSL_IIM
  36
  37 /* U-Boot memory offsets */
  38 #define CONFIG_LOADADDR         0x72000000
  39 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  40
  41 /* Linux boot */
  42 #define CONFIG_HOSTNAME         "usbarmory"
  43 #define CONFIG_BOOTCOMMAND                                              \
  44         "run distro_bootcmd; "                                          \
  45         "setenv bootargs console=${console} ${bootargs_default}; "      \
  46         "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "              \
  47         "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "             \
  48         "bootz ${kernel_addr_r} - ${fdt_addr_r}"
  49
  50 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
  51
  52 #include <config_distro_bootcmd.h>
  53
  54 #define MEM_LAYOUT_ENV_SETTINGS                 \
  55         "kernel_addr_r=0x70800000\0"            \
  56         "fdt_addr_r=0x71000000\0"               \
  57         "scriptaddr=0x70800000\0"               \
  58         "pxefile_addr_r=0x70800000\0"           \
  59         "ramdisk_addr_r=0x73000000\0"
  60
  61 #define CONFIG_EXTRA_ENV_SETTINGS                               \
  62         MEM_LAYOUT_ENV_SETTINGS                                 \
  63         "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0"    \
  64         "fdtfile=imx53-usbarmory.dtb\0"                         \
  65         "console=ttymxc0,115200\0"                              \
  66         BOOTENV
  67
  68 #ifndef CONFIG_CMDLINE
  69 #define USBARMORY_FIT_PATH      "/boot/usbarmory.itb"
  70 #define USBARMORY_FIT_ADDR      "0x70800000"
  71 #endif
  72
  73 /* Physical Memory Map */
  74 #define PHYS_SDRAM                      CSD0_BASE_ADDR
  75 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  76
  77 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  78 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  79 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  80
  81 #define CONFIG_SYS_INIT_SP_OFFSET \
  82         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  83 #define CONFIG_SYS_INIT_SP_ADDR \
  84         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  85
  86 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  87
  88 #endif                          /* __CONFIG_H */