include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Panasonic Corporation
   3  * Copyright (C) 2015-2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /* U-Boot - Common settings for UniPhier Family */
  10
  11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  12 #define __CONFIG_UNIPHIER_COMMON_H__
  13
  14 #define CONFIG_ARMV7_PSCI_1_0
  15
  16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  17
  18 /*-----------------------------------------------------------------------
  19  * MMU and Cache Setting
  20  *----------------------------------------------------------------------*/
  21
  22 /* Comment out the following to enable L1 cache */
  23 /* #define CONFIG_SYS_ICACHE_OFF */
  24 /* #define CONFIG_SYS_DCACHE_OFF */
  25
  26 #define CONFIG_DISPLAY_CPUINFO
  27 #define CONFIG_DISPLAY_BOARDINFO
  28 #define CONFIG_BOARD_LATE_INIT
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  31
  32 #define CONFIG_TIMESTAMP
  33
  34 /* FLASH related */
  35 #define CONFIG_MTD_DEVICE
  36
  37 #define CONFIG_SMC911X_32_BIT
  38 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  39 #define CONFIG_SMC911X_BASE     0
  40
  41 #ifdef CONFIG_MICRO_SUPPORT_CARD
  42 #define CONFIG_SMC911X
  43 #else
  44 #define CONFIG_SYS_NO_FLASH
  45 #endif
  46
  47 #define CONFIG_FLASH_CFI_DRIVER
  48 #define CONFIG_SYS_FLASH_CFI
  49
  50 #define CONFIG_SYS_MAX_FLASH_SECT       256
  51 #define CONFIG_SYS_MONITOR_BASE         0
  52 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  53 #define CONFIG_SYS_FLASH_BASE           0
  54
  55 /*
  56  * flash_toggle does not work for our support card.
  57  * We need to use flash_status_poll.
  58  */
  59 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  60
  61 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  62
  63 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  64
  65 /* serial console configuration */
  66 #define CONFIG_BAUDRATE                 115200
  67
  68 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  69 #define CONFIG_USE_ARCH_MEMSET
  70 #define CONFIG_USE_ARCH_MEMCPY
  71 #endif
  72
  73 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  74
  75 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  76 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  77 /* Print Buffer Size */
  78 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  79 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  80 /* Boot Argument Buffer Size */
  81 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  82
  83 #define CONFIG_CONS_INDEX               1
  84
  85 /* #define CONFIG_ENV_IS_NOWHERE */
  86 /* #define CONFIG_ENV_IS_IN_NAND */
  87 #define CONFIG_ENV_IS_IN_MMC
  88 #define CONFIG_ENV_OFFSET                       0x80000
  89 #define CONFIG_ENV_SIZE                         0x2000
  90 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  91
  92 #define CONFIG_SYS_MMC_ENV_DEV          0
  93 #define CONFIG_SYS_MMC_ENV_PART         1
  94
  95 #ifdef CONFIG_ARM64
  96 #define CPU_RELEASE_ADDR                        0x80000000
  97 #define COUNTER_FREQUENCY                       50000000
  98 #define CONFIG_GICV3
  99 #define GICD_BASE                               0x5fe00000
 100 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 101 #define GICR_BASE                               0x5fe40000
 102 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 103 #define GICR_BASE                               0x5fe80000
 104 #endif
 105 #else
 106 /* Time clock 1MHz */
 107 #define CONFIG_SYS_TIMER_RATE                   1000000
 108 #endif
 109
 110
 111 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 112 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 113 #define CONFIG_SYS_NAND_ONFI_DETECTION
 114
 115 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 116
 117 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 118 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 119 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 120 #else
 121 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 122 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 123 #endif
 124
 125 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 126
 127 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 128 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 129
 130 /* USB */
 131 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 132 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 133 #define CONFIG_FAT_WRITE
 134 #define CONFIG_DOS_PARTITION
 135
 136 /* SD/MMC */
 137 #define CONFIG_SUPPORT_EMMC_BOOT
 138 #define CONFIG_GENERIC_MMC
 139
 140 /* memtest works on */
 141 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 142 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 143
 144 /*
 145  * Network Configuration
 146  */
 147 #define CONFIG_SERVERIP                 192.168.11.1
 148 #define CONFIG_IPADDR                   192.168.11.10
 149 #define CONFIG_GATEWAYIP                192.168.11.1
 150 #define CONFIG_NETMASK                  255.255.255.0
 151
 152 #define CONFIG_LOADADDR                 0x84000000
 153 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 154
 155 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 156
 157 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 158
 159 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 160 #define CONFIG_NFSBOOTCOMMAND                                           \
 161         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 162         "nfsroot=$serverip:$rootpath "                                  \
 163         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 164                 "run __nfsboot"
 165
 166 #ifdef CONFIG_FIT
 167 #define CONFIG_BOOTFILE                 "fitImage"
 168 #define LINUXBOOT_ENV_SETTINGS \
 169         "fit_addr=0x00100000\0" \
 170         "fit_addr_r=0x84100000\0" \
 171         "fit_size=0x00f00000\0" \
 172         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 173                 "bootm $fit_addr\0" \
 174         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 175                 "bootm $fit_addr_r\0" \
 176         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 177                 "bootm $fit_addr_r\0" \
 178         "__nfsboot=run tftpboot\0"
 179 #else
 180 #ifdef CONFIG_ARM64
 181 #define CONFIG_BOOTFILE                 "Image"
 182 #define LINUXBOOT_CMD                   "booti"
 183 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 184 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 185 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 186 #else
 187 #define CONFIG_BOOTFILE                 "zImage"
 188 #define LINUXBOOT_CMD                   "bootz"
 189 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 190 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 191 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 192 #endif
 193 #define LINUXBOOT_ENV_SETTINGS \
 194         "fdt_addr=0x00100000\0" \
 195         "fdt_addr_r=0x84100000\0" \
 196         "fdt_size=0x00008000\0" \
 197         "kernel_addr=0x00200000\0" \
 198         KERNEL_ADDR_R \
 199         KERNEL_SIZE \
 200         RAMDISK_ADDR \
 201         "ramdisk_addr_r=0x84a00000\0" \
 202         "ramdisk_size=0x00600000\0" \
 203         "ramdisk_file=rootfs.cpio.uboot\0" \
 204         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 205                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 206         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 207                 "setexpr kernel_size $kernel_size / 4 &&" \
 208                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 209                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 210                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 211                 "run boot_common\0" \
 212         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 213                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 214                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 215                 "run boot_common\0" \
 216         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 217                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 218                 "tftpboot $fdt_addr_r $fdt_file &&" \
 219                 "run boot_common\0" \
 220         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 221                 "tftpboot $fdt_addr_r $fdt_file &&" \
 222                 "setenv ramdisk_addr_r - &&" \
 223                 "run boot_common\0"
 224 #endif
 225
 226 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 227         "netdev=eth0\0"                                         \
 228         "verify=n\0"                                            \
 229         "nor_base=0x42000000\0"                                 \
 230         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 231                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 232                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 233                 "tftpboot $tmp_addr u-boot.bin\0"               \
 234         "emmcupdate=mmcsetn &&"                                 \
 235                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 236                 "tftpboot u-boot-spl.bin &&"                    \
 237                 "mmc write $loadaddr 0 80 &&"                   \
 238                 "tftpboot u-boot.bin &&"                        \
 239                 "mmc write $loadaddr 80 780\0"                  \
 240         "nandupdate=nand erase 0 0x00100000 &&"                 \
 241                 "tftpboot u-boot-spl.bin &&"                    \
 242                 "nand write $loadaddr 0 0x00010000 &&"          \
 243                 "tftpboot u-boot.bin &&"                        \
 244                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 245         LINUXBOOT_ENV_SETTINGS
 246
 247 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 248
 249 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 250 #define CONFIG_NR_DRAM_BANKS            2
 251 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 252 #define CONFIG_SYS_MEM_TOP_HIDE         64
 253
 254 #if defined(CONFIG_ARM64)
 255 #define CONFIG_SPL_TEXT_BASE            0x30000000
 256 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 257         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 258         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 259 #define CONFIG_SPL_TEXT_BASE            0x00040000
 260 #else
 261 #define CONFIG_SPL_TEXT_BASE            0x00100000
 262 #endif
 263
 264 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 265 #define CONFIG_SPL_STACK                (0x30014c00)
 266 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 267 #define CONFIG_SPL_STACK                (0x3001c000)
 268 #else
 269 #define CONFIG_SPL_STACK                (0x00100000)
 270 #endif
 271 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 272
 273 #define CONFIG_PANIC_HANG
 274
 275 #define CONFIG_SPL_FRAMEWORK
 276 #ifdef CONFIG_ARM64
 277 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 278 #endif
 279
 280 #define CONFIG_SPL_BOARD_INIT
 281
 282 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 283
 284 /* subtract sizeof(struct image_header) */
 285 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 286 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 287
 288 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 289 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 290 #define CONFIG_SPL_MAX_SIZE                     0x10000
 291 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 292 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 293 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 294 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 295 #endif
 296 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 297
 298 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */