include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Panasonic Corporation
   3  * Copyright (C) 2015-2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /* U-Boot - Common settings for UniPhier Family */
  10
  11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  12 #define __CONFIG_UNIPHIER_COMMON_H__
  13
  14 #define CONFIG_ARMV7_PSCI
  15 #define CONFIG_ARMV7_PSCI_1_0
  16 #define CONFIG_ARMV7_PSCI_NR_CPUS   4
  17
  18 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  19
  20 #define CONFIG_SMC911X
  21
  22 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  23 #define CONFIG_SMC911X_BASE     0
  24 #define CONFIG_SMC911X_32_BIT
  25
  26 /*-----------------------------------------------------------------------
  27  * MMU and Cache Setting
  28  *----------------------------------------------------------------------*/
  29
  30 /* Comment out the following to enable L1 cache */
  31 /* #define CONFIG_SYS_ICACHE_OFF */
  32 /* #define CONFIG_SYS_DCACHE_OFF */
  33
  34 #ifdef CONFIG_CACHE_UNIPHIER
  35 #define CONFIG_SYS_CACHELINE_SIZE       128
  36 #else
  37 #define CONFIG_SYS_CACHELINE_SIZE       32
  38 #endif
  39
  40 #define CONFIG_DISPLAY_CPUINFO
  41 #define CONFIG_DISPLAY_BOARDINFO
  42 #define CONFIG_MISC_INIT_F
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_BOARD_EARLY_INIT_R
  45 #define CONFIG_BOARD_LATE_INIT
  46
  47 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  48
  49 #define CONFIG_TIMESTAMP
  50
  51 /* FLASH related */
  52 #define CONFIG_MTD_DEVICE
  53
  54 /*
  55  * uncomment the following to disable FLASH related code.
  56  */
  57 /* #define CONFIG_SYS_NO_FLASH */
  58
  59 #define CONFIG_FLASH_CFI_DRIVER
  60 #define CONFIG_SYS_FLASH_CFI
  61
  62 #define CONFIG_SYS_MAX_FLASH_SECT       256
  63 #define CONFIG_SYS_MONITOR_BASE         0
  64 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  65 #define CONFIG_SYS_FLASH_BASE           0
  66
  67 /*
  68  * flash_toggle does not work for out supoort card.
  69  * We need to use flash_status_poll.
  70  */
  71 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  72
  73 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  74
  75 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  76
  77 /* serial console configuration */
  78 #define CONFIG_BAUDRATE                 115200
  79
  80 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  81 #define CONFIG_USE_ARCH_MEMSET
  82 #define CONFIG_USE_ARCH_MEMCPY
  83 #endif
  84
  85 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  86
  87 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  88 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  89 /* Print Buffer Size */
  90 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  91 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  92 /* Boot Argument Buffer Size */
  93 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  94
  95 #define CONFIG_CONS_INDEX               1
  96
  97 /* #define CONFIG_ENV_IS_NOWHERE */
  98 /* #define CONFIG_ENV_IS_IN_NAND */
  99 #define CONFIG_ENV_IS_IN_MMC
 100 #define CONFIG_ENV_OFFSET                       0x80000
 101 #define CONFIG_ENV_SIZE                         0x2000
 102 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
 103
 104 #define CONFIG_SYS_MMC_ENV_DEV          0
 105 #define CONFIG_SYS_MMC_ENV_PART         1
 106
 107 #ifdef CONFIG_ARM64
 108 #define CPU_RELEASE_ADDR                        0x80000000
 109 #define COUNTER_FREQUENCY                       50000000
 110 #define CONFIG_GICV3
 111 #define GICD_BASE                               0x5fe00000
 112 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 113 #define GICR_BASE                               0x5fe40000
 114 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 115 #define GICR_BASE                               0x5fe80000
 116 #endif
 117 #else
 118 /* Time clock 1MHz */
 119 #define CONFIG_SYS_TIMER_RATE                   1000000
 120 #endif
 121
 122
 123 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 124 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 125 #define CONFIG_SYS_NAND_ONFI_DETECTION
 126
 127 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 128
 129 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 130 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 131 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 132 #else
 133 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 134 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 135 #endif
 136
 137 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 138
 139 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 140 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 141
 142 /* USB */
 143 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 144 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 145 #define CONFIG_FAT_WRITE
 146 #define CONFIG_DOS_PARTITION
 147
 148 /* SD/MMC */
 149 #define CONFIG_SUPPORT_EMMC_BOOT
 150 #define CONFIG_GENERIC_MMC
 151
 152 /* memtest works on */
 153 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 154 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 155
 156 /*
 157  * Network Configuration
 158  */
 159 #define CONFIG_SERVERIP                 192.168.11.1
 160 #define CONFIG_IPADDR                   192.168.11.10
 161 #define CONFIG_GATEWAYIP                192.168.11.1
 162 #define CONFIG_NETMASK                  255.255.255.0
 163
 164 #define CONFIG_LOADADDR                 0x84000000
 165 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 166
 167 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 168
 169 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 170
 171 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 172 #define CONFIG_NFSBOOTCOMMAND                                           \
 173         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 174         "nfsroot=$serverip:$rootpath "                                  \
 175         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 176                 "run __nfsboot"
 177
 178 #ifdef CONFIG_FIT
 179 #define CONFIG_BOOTFILE                 "fitImage"
 180 #define LINUXBOOT_ENV_SETTINGS \
 181         "fit_addr=0x00100000\0" \
 182         "fit_addr_r=0x84100000\0" \
 183         "fit_size=0x00f00000\0" \
 184         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 185                 "bootm $fit_addr\0" \
 186         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 187                 "bootm $fit_addr_r\0" \
 188         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 189                 "bootm $fit_addr_r\0" \
 190         "__nfsboot=run tftpboot\0"
 191 #else
 192 #ifdef CONFIG_ARM64
 193 #define CONFIG_BOOTFILE                 "Image"
 194 #define LINUXBOOT_CMD                   "booti"
 195 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 196 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 197 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 198 #else
 199 #define CONFIG_BOOTFILE                 "zImage"
 200 #define LINUXBOOT_CMD                   "bootz"
 201 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 202 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 203 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 204 #endif
 205 #define LINUXBOOT_ENV_SETTINGS \
 206         "fdt_addr=0x00100000\0" \
 207         "fdt_addr_r=0x84100000\0" \
 208         "fdt_size=0x00008000\0" \
 209         "kernel_addr=0x00200000\0" \
 210         KERNEL_ADDR_R \
 211         KERNEL_SIZE \
 212         RAMDISK_ADDR \
 213         "ramdisk_addr_r=0x84a00000\0" \
 214         "ramdisk_size=0x00600000\0" \
 215         "ramdisk_file=rootfs.cpio.uboot\0" \
 216         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 217                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 218         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 219                 "setexpr kernel_size $kernel_size / 4 &&" \
 220                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 221                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 222                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 223                 "run boot_common\0" \
 224         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 225                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 226                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 227                 "run boot_common\0" \
 228         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 229                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 230                 "tftpboot $fdt_addr_r $fdt_file &&" \
 231                 "run boot_common\0" \
 232         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 233                 "tftpboot $fdt_addr_r $fdt_file &&" \
 234                 "setenv ramdisk_addr_r - &&" \
 235                 "run boot_common\0"
 236 #endif
 237
 238 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 239         "netdev=eth0\0"                                         \
 240         "verify=n\0"                                            \
 241         "nor_base=0x42000000\0"                                 \
 242         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 243                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 244                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 245                 "tftpboot $tmp_addr u-boot.bin\0"               \
 246         "emmcupdate=mmcsetn &&"                                 \
 247                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 248                 "tftpboot u-boot-spl.bin &&"                    \
 249                 "mmc write $loadaddr 0 80 &&"                   \
 250                 "tftpboot u-boot.bin &&"                        \
 251                 "mmc write $loadaddr 80 780\0"                  \
 252         "nandupdate=nand erase 0 0x00100000 &&"                 \
 253                 "tftpboot u-boot-spl.bin &&"                    \
 254                 "nand write $loadaddr 0 0x00010000 &&"          \
 255                 "tftpboot u-boot.bin &&"                        \
 256                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 257         LINUXBOOT_ENV_SETTINGS
 258
 259 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 260
 261 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 262 #define CONFIG_NR_DRAM_BANKS            2
 263 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 264 #define CONFIG_SYS_MEM_TOP_HIDE         64
 265
 266 #if defined(CONFIG_ARM64)
 267 #define CONFIG_SPL_TEXT_BASE            0x30000000
 268 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 269         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 270         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 271 #define CONFIG_SPL_TEXT_BASE            0x00040000
 272 #else
 273 #define CONFIG_SPL_TEXT_BASE            0x00100000
 274 #endif
 275
 276 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 277 #define CONFIG_SPL_STACK                (0x30014c00)
 278 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 279 #define CONFIG_SPL_STACK                (0x3001c000)
 280 #else
 281 #define CONFIG_SPL_STACK                (0x00100000)
 282 #endif
 283 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 284
 285 #define CONFIG_PANIC_HANG
 286
 287 #define CONFIG_SPL_FRAMEWORK
 288 #define CONFIG_SPL_SERIAL_SUPPORT
 289 #define CONFIG_SPL_NOR_SUPPORT
 290 #ifdef CONFIG_ARM64
 291 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 292 #else
 293 #define CONFIG_SPL_NAND_SUPPORT
 294 #define CONFIG_SPL_MMC_SUPPORT
 295 #endif
 296
 297 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* for mem_malloc_init */
 298 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 299
 300 #define CONFIG_SPL_BOARD_INIT
 301
 302 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 303
 304 /* subtract sizeof(struct image_header) */
 305 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 306 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 307
 308 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 309 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 310 #define CONFIG_SPL_MAX_SIZE                     0x10000
 311 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 312 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 313 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 314 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 315 #endif
 316 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 317
 318 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */