include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /* U-Boot - Common settings for UniPhier Family */
   8
   9 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  10 #define __CONFIG_UNIPHIER_COMMON_H__
  11
  12 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  13
  14 #define CONFIG_SMC911X
  15
  16 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  17 #define CONFIG_SMC911X_BASE     0
  18 #define CONFIG_SMC911X_32_BIT
  19
  20 /*-----------------------------------------------------------------------
  21  * MMU and Cache Setting
  22  *----------------------------------------------------------------------*/
  23
  24 /* Comment out the following to enable L1 cache */
  25 /* #define CONFIG_SYS_ICACHE_OFF */
  26 /* #define CONFIG_SYS_DCACHE_OFF */
  27
  28 #define CONFIG_SYS_CACHELINE_SIZE       32
  29
  30 #define CONFIG_DISPLAY_CPUINFO
  31 #define CONFIG_DISPLAY_BOARDINFO
  32 #define CONFIG_MISC_INIT_F
  33 #define CONFIG_BOARD_EARLY_INIT_F
  34 #define CONFIG_BOARD_EARLY_INIT_R
  35 #define CONFIG_BOARD_LATE_INIT
  36
  37 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  38
  39 #define CONFIG_TIMESTAMP
  40
  41 /* FLASH related */
  42 #define CONFIG_MTD_DEVICE
  43
  44 /*
  45  * uncomment the following to disable FLASH related code.
  46  */
  47 /* #define CONFIG_SYS_NO_FLASH */
  48
  49 #define CONFIG_FLASH_CFI_DRIVER
  50 #define CONFIG_SYS_FLASH_CFI
  51
  52 #define CONFIG_SYS_MAX_FLASH_SECT       256
  53 #define CONFIG_SYS_MONITOR_BASE         0
  54 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  55 #define CONFIG_SYS_FLASH_BASE           0
  56
  57 /*
  58  * flash_toggle does not work for out supoort card.
  59  * We need to use flash_status_poll.
  60  */
  61 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  62
  63 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  64
  65 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  66
  67 /* serial console configuration */
  68 #define CONFIG_BAUDRATE                 115200
  69
  70 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  71 #define CONFIG_USE_ARCH_MEMSET
  72 #define CONFIG_USE_ARCH_MEMCPY
  73 #endif
  74
  75 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  76
  77 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  78 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  79 /* Print Buffer Size */
  80 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  81 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  82 /* Boot Argument Buffer Size */
  83 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  84
  85 #define CONFIG_CONS_INDEX               1
  86
  87 /* #define CONFIG_ENV_IS_NOWHERE */
  88 /* #define CONFIG_ENV_IS_IN_NAND */
  89 #define CONFIG_ENV_IS_IN_MMC
  90 #define CONFIG_ENV_OFFSET                       0x80000
  91 #define CONFIG_ENV_SIZE                         0x2000
  92 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  93
  94 #define CONFIG_SYS_MMC_ENV_DEV          0
  95 #define CONFIG_SYS_MMC_ENV_PART         1
  96
  97 #ifdef CONFIG_ARM64
  98 #define CPU_RELEASE_ADDR                        0x80000000
  99 #define COUNTER_FREQUENCY                       50000000
 100 #define CONFIG_GICV3
 101 #define GICD_BASE                               0x5fe00000
 102 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 103 #define GICR_BASE                               0x5fe40000
 104 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 105 #define GICR_BASE                               0x5fe80000
 106 #endif
 107 #else
 108 /* Time clock 1MHz */
 109 #define CONFIG_SYS_TIMER_RATE                   1000000
 110 #endif
 111
 112
 113 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 114 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 115 #define CONFIG_SYS_NAND_ONFI_DETECTION
 116
 117 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 118
 119 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 120 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 121 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 122 #else
 123 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 124 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 125 #endif
 126
 127 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 128
 129 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 130 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 131
 132 /* USB */
 133 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 134 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 135 #define CONFIG_FAT_WRITE
 136 #define CONFIG_DOS_PARTITION
 137
 138 /* SD/MMC */
 139 #define CONFIG_SUPPORT_EMMC_BOOT
 140 #define CONFIG_GENERIC_MMC
 141
 142 /* memtest works on */
 143 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 144 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 145
 146 /*
 147  * Network Configuration
 148  */
 149 #define CONFIG_SERVERIP                 192.168.11.1
 150 #define CONFIG_IPADDR                   192.168.11.10
 151 #define CONFIG_GATEWAYIP                192.168.11.1
 152 #define CONFIG_NETMASK                  255.255.255.0
 153
 154 #define CONFIG_LOADADDR                 0x84000000
 155 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 156
 157 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 158
 159 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 160
 161 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 162 #define CONFIG_NFSBOOTCOMMAND                                           \
 163         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 164         "nfsroot=$serverip:$rootpath "                                  \
 165         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 166                 "run __nfsboot"
 167
 168 #ifdef CONFIG_FIT
 169 #define CONFIG_BOOTFILE                 "fitImage"
 170 #define LINUXBOOT_ENV_SETTINGS \
 171         "fit_addr=0x00100000\0" \
 172         "fit_addr_r=0x84100000\0" \
 173         "fit_size=0x00f00000\0" \
 174         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 175                 "bootm $fit_addr\0" \
 176         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 177                 "bootm $fit_addr_r\0" \
 178         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 179                 "bootm $fit_addr_r\0" \
 180         "__nfsboot=run tftpboot\0"
 181 #else
 182 #ifdef CONFIG_ARM64
 183 #define CONFIG_CMD_BOOTI
 184 #define CONFIG_BOOTFILE                 "Image"
 185 #define LINUXBOOT_CMD                   "booti"
 186 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 187 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 188 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 189 #else
 190 #define CONFIG_BOOTFILE                 "zImage"
 191 #define LINUXBOOT_CMD                   "bootz"
 192 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 193 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 194 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 195 #endif
 196 #define LINUXBOOT_ENV_SETTINGS \
 197         "fdt_addr=0x00100000\0" \
 198         "fdt_addr_r=0x84100000\0" \
 199         "fdt_size=0x00008000\0" \
 200         "kernel_addr=0x00200000\0" \
 201         KERNEL_ADDR_R \
 202         KERNEL_SIZE \
 203         RAMDISK_ADDR \
 204         "ramdisk_addr_r=0x84a00000\0" \
 205         "ramdisk_size=0x00600000\0" \
 206         "ramdisk_file=rootfs.cpio.uboot\0" \
 207         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 208                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 209         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 210                 "setexpr kernel_size $kernel_size / 4 &&" \
 211                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 212                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 213                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 214                 "run boot_common\0" \
 215         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 216                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 217                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 218                 "run boot_common\0" \
 219         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 220                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 221                 "tftpboot $fdt_addr_r $fdt_file &&" \
 222                 "run boot_common\0" \
 223         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 224                 "tftpboot $fdt_addr_r $fdt_file &&" \
 225                 "setenv ramdisk_addr_r - &&" \
 226                 "run boot_common\0"
 227 #endif
 228
 229 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 230         "netdev=eth0\0"                                         \
 231         "verify=n\0"                                            \
 232         "nor_base=0x42000000\0"                                 \
 233         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 234                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 235                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 236                 "tftpboot $tmp_addr u-boot.bin\0"               \
 237         "emmcupdate=mmcsetn &&"                                 \
 238                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 239                 "tftpboot u-boot-spl.bin &&"                    \
 240                 "mmc write $loadaddr 0 80 &&"                   \
 241                 "tftpboot u-boot.bin &&"                        \
 242                 "mmc write $loadaddr 80 780\0"                  \
 243         "nandupdate=nand erase 0 0x00100000 &&"                 \
 244                 "tftpboot u-boot-spl.bin &&"                    \
 245                 "nand write $loadaddr 0 0x00010000 &&"          \
 246                 "tftpboot u-boot.bin &&"                        \
 247                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 248         LINUXBOOT_ENV_SETTINGS
 249
 250 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 251
 252 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 253 #define CONFIG_NR_DRAM_BANKS            2
 254 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 255 #define CONFIG_SYS_MEM_TOP_HIDE         64
 256
 257 #if defined(CONFIG_ARM64)
 258 #define CONFIG_SPL_TEXT_BASE            0x30000000
 259 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 260         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 261         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 262 #define CONFIG_SPL_TEXT_BASE            0x00040000
 263 #else
 264 #define CONFIG_SPL_TEXT_BASE            0x00100000
 265 #endif
 266
 267 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 268 #define CONFIG_SPL_STACK                (0x30014c00)
 269 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 270 #define CONFIG_SPL_STACK                (0x3001c000)
 271 #else
 272 #define CONFIG_SPL_STACK                (0x00100000)
 273 #endif
 274 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 275
 276 #define CONFIG_PANIC_HANG
 277
 278 #define CONFIG_SPL_FRAMEWORK
 279 #define CONFIG_SPL_SERIAL_SUPPORT
 280 #define CONFIG_SPL_NOR_SUPPORT
 281 #ifdef CONFIG_ARM64
 282 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 283 #else
 284 #define CONFIG_SPL_NAND_SUPPORT
 285 #define CONFIG_SPL_MMC_SUPPORT
 286 #endif
 287
 288 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* for mem_malloc_init */
 289 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 290
 291 #define CONFIG_SPL_BOARD_INIT
 292
 293 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 294
 295 /* subtract sizeof(struct image_header) */
 296 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 297 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 298
 299 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 300 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 301 #define CONFIG_SPL_MAX_SIZE                     0x10000
 302 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 303 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 304 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 305 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 306 #endif
 307 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 308
 309 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */