1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2012-2015 Panasonic Corporation
4 * Copyright (C) 2015-2016 Socionext Inc.
5 * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
8 /* U-Boot - Common settings for UniPhier Family */
10 #ifndef __CONFIG_UNIPHIER_COMMON_H__
11 #define __CONFIG_UNIPHIER_COMMON_H__
13 #ifndef CONFIG_SPL_BUILD
14 #include <config_distro_bootcmd.h>
17 #define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
19 #define BOOT_TARGET_DEVICE_MMC(func)
22 #ifdef CONFIG_CMD_UBIFS
23 #define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
25 #define BOOT_TARGET_DEVICE_UBIFS(func)
29 #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
31 #define BOOT_TARGET_DEVICE_USB(func)
34 #define BOOT_TARGET_DEVICES(func) \
35 BOOT_TARGET_DEVICE_MMC(func) \
36 BOOT_TARGET_DEVICE_UBIFS(func) \
37 BOOT_TARGET_DEVICE_USB(func)
42 #define CONFIG_ARMV7_PSCI_1_0
44 /*-----------------------------------------------------------------------
45 * MMU and Cache Setting
46 *----------------------------------------------------------------------*/
48 /* Comment out the following to enable L1 cache */
49 /* #define CONFIG_SYS_ICACHE_OFF */
50 /* #define CONFIG_SYS_DCACHE_OFF */
52 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
54 #define CONFIG_TIMESTAMP
58 #define CONFIG_SYS_MAX_FLASH_SECT 256
59 #define CONFIG_SYS_MONITOR_BASE 0
60 #define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */
61 #define CONFIG_SYS_FLASH_BASE 0
64 * flash_toggle does not work for our support card.
65 * We need to use flash_status_poll.
67 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
69 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
71 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
73 /* serial console configuration */
75 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
76 /* Boot Argument Buffer Size */
77 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
79 #define CONFIG_ENV_OFFSET 0x100000
80 #define CONFIG_ENV_SIZE 0x2000
81 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
83 #define CONFIG_SYS_MMC_ENV_DEV 0
84 #define CONFIG_SYS_MMC_ENV_PART 1
86 #if !defined(CONFIG_ARM64)
88 #define CONFIG_SYS_TIMER_RATE 1000000
91 #define CONFIG_SYS_MAX_NAND_DEVICE 1
92 #define CONFIG_SYS_NAND_ONFI_DETECTION
93 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000
94 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000
95 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
97 /* memtest works on */
98 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
99 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
102 * Network Configuration
104 #define CONFIG_SERVERIP 192.168.11.1
105 #define CONFIG_IPADDR 192.168.11.10
106 #define CONFIG_GATEWAYIP 192.168.11.1
107 #define CONFIG_NETMASK 255.255.255.0
109 #define CONFIG_LOADADDR 0x85000000
110 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
111 #define CONFIG_SYS_BOOTM_LEN (32 << 20)
113 #if defined(CONFIG_ARM64)
114 /* ARM Trusted Firmware */
115 #define BOOT_IMAGES \
116 "second_image=unph_bl.bin\0" \
117 "third_image=fip.bin\0"
119 #define BOOT_IMAGES \
120 "second_image=u-boot-spl.bin\0" \
121 "third_image=u-boot.bin\0"
124 #define CONFIG_ROOTPATH "/nfs/root/path"
125 #define CONFIG_NFSBOOTCOMMAND \
126 "setenv bootargs $bootargs root=/dev/nfs rw " \
127 "nfsroot=$serverip:$rootpath " \
128 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
132 #define CONFIG_BOOTFILE "fitImage"
133 #define LINUXBOOT_ENV_SETTINGS \
134 "kernel_addr_r=0x85100000\0" \
135 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
136 "bootm $kernel_addr_r\0" \
137 "__nfsboot=run tftpboot\0"
140 #define CONFIG_BOOTFILE "Image"
141 #define LINUXBOOT_CMD "booti"
142 #define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
144 #define CONFIG_BOOTFILE "zImage"
145 #define LINUXBOOT_CMD "bootz"
146 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
148 #define LINUXBOOT_ENV_SETTINGS \
149 "fdt_addr_r=0x85100000\0" \
151 "ramdisk_addr_r=0x86000000\0" \
152 "ramdisk_file=rootfs.cpio.gz\0" \
153 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
154 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
155 "tftpboot=tftpboot $kernel_addr_r $bootfile && " \
156 "tftpboot $fdt_addr_r $fdtfile &&" \
157 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
158 "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
159 "run boot_common\0" \
160 "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
161 "tftpboot $fdt_addr_r $fdtfile &&" \
162 "setenv ramdisk_addr_r - &&" \
166 #define CONFIG_EXTRA_ENV_SETTINGS \
168 "initrd_high=0xffffffffffffffff\0" \
169 "script=boot.scr\0" \
170 "scriptaddr=0x85000000\0" \
171 "nor_base=0x42000000\0" \
172 "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
173 "nandboot=run bootcmd_ubifs0\0" \
174 "norboot=run tftpboot\0" \
175 "usbboot=run bootcmd_usb0\0" \
176 "emmcscript=setenv devtype mmc && " \
178 "setenv devnum ${mmc_first_dev} && " \
179 "run loadscript_fat\0" \
180 "nandscript=echo Running ${script} from ubi ... && " \
182 "ubifsmount ubi0:boot && " \
183 "ubifsload ${loadaddr} ${script} && " \
185 "norscript=echo Running ${script} from tftp ... && " \
186 "tftpboot ${script} &&" \
188 "usbscript=usb start && " \
189 "setenv devtype usb && " \
190 "setenv devnum 0 && " \
191 "run loadscript_fat\0" \
192 "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
193 "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
195 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
196 "tftpboot $tmp_addr $second_image && " \
197 "setexpr tmp_addr $nor_base + 0x70000 && " \
198 "tftpboot $tmp_addr $third_image\0" \
199 "emmcupdate=mmcsetn &&" \
200 "mmc dev $mmc_first_dev &&" \
201 "mmc partconf $mmc_first_dev 0 1 1 &&" \
202 "tftpboot $second_image && " \
203 "mmc write $loadaddr 0 100 && " \
204 "tftpboot $third_image && " \
205 "mmc write $loadaddr 100 f00\0" \
206 "nandupdate=nand erase 0 0x00100000 &&" \
207 "tftpboot $second_image && " \
208 "nand write $loadaddr 0 0x00020000 && " \
209 "tftpboot $third_image && " \
210 "nand write $loadaddr 0x00020000 0x001e0000\0" \
211 "usbupdate=usb start &&" \
212 "tftpboot $second_image && " \
213 "usb write $loadaddr 0 100 && " \
214 "tftpboot $third_image && " \
215 "usb write $loadaddr 100 f00\0" \
217 LINUXBOOT_ENV_SETTINGS \
220 #define CONFIG_SYS_BOOTMAPSZ 0x20000000
222 #define CONFIG_SYS_SDRAM_BASE 0x80000000
224 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
227 #if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
228 defined(CONFIG_ARCH_UNIPHIER_SLD8)
231 #define CONFIG_SPL_STACK (0x00200000)
233 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
235 /* subtract sizeof(struct image_header) */
236 #define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40)
238 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
239 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000
240 #define CONFIG_SPL_MAX_SIZE 0x10000
241 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000
243 #define CONFIG_SPL_PAD_TO 0x20000
245 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */