include/configs/uniphier.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2012-2015 Panasonic Corporation
   4  * Copyright (C) 2015-2016 Socionext Inc.
   5  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   6  */
   7
   8 /* U-Boot - Common settings for UniPhier Family */
   9
  10 #ifndef __CONFIG_UNIPHIER_H__
  11 #define __CONFIG_UNIPHIER_H__
  12
  13 #ifndef CONFIG_SPL_BUILD
  14 #include <config_distro_bootcmd.h>
  15
  16 #ifdef CONFIG_CMD_MMC
  17 #define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0) func(MMC, mmc, 1)
  18 #else
  19 #define BOOT_TARGET_DEVICE_MMC(func)
  20 #endif
  21
  22 #ifdef CONFIG_CMD_UBIFS
  23 #define BOOT_TARGET_DEVICE_UBIFS(func)  func(UBIFS, ubifs, 0)
  24 #else
  25 #define BOOT_TARGET_DEVICE_UBIFS(func)
  26 #endif
  27
  28 #ifdef CONFIG_CMD_USB
  29 #define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  30 #else
  31 #define BOOT_TARGET_DEVICE_USB(func)
  32 #endif
  33
  34 #define BOOT_TARGET_DEVICES(func)       \
  35         BOOT_TARGET_DEVICE_MMC(func)    \
  36         BOOT_TARGET_DEVICE_UBIFS(func)  \
  37         BOOT_TARGET_DEVICE_USB(func)
  38 #else
  39 #define BOOTENV
  40 #endif
  41
  42 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  43
  44 #define CONFIG_TIMESTAMP
  45
  46 #define CONFIG_SYS_MONITOR_BASE         0
  47 #define CONFIG_SYS_MONITOR_LEN          0x00200000      /* 2MB */
  48
  49 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  50 /* Boot Argument Buffer Size */
  51 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  52
  53 #if !defined(CONFIG_ARM64)
  54 /* Time clock 1MHz */
  55 #define CONFIG_SYS_TIMER_RATE                   1000000
  56 #endif
  57
  58 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
  59 #define CONFIG_SYS_NAND_ONFI_DETECTION
  60 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
  61 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
  62 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
  63
  64 /*
  65  * Network Configuration
  66  */
  67 #define CONFIG_SERVERIP                 192.168.11.1
  68 #define CONFIG_IPADDR                   192.168.11.10
  69 #define CONFIG_GATEWAYIP                192.168.11.1
  70 #define CONFIG_NETMASK                  255.255.255.0
  71
  72 #define CONFIG_SYS_LOAD_ADDR            0x85000000
  73 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  74
  75 #if defined(CONFIG_ARM64)
  76 /* ARM Trusted Firmware */
  77 #define BOOT_IMAGES \
  78         "second_image=unph_bl.bin\0" \
  79         "third_image=fip.bin\0"
  80 #else
  81 #define BOOT_IMAGES \
  82         "second_image=u-boot-spl.bin\0" \
  83         "third_image=u-boot.bin\0"
  84 #endif
  85
  86 #define CONFIG_ROOTPATH                 "/nfs/root/path"
  87 #define CONFIG_NFSBOOTCOMMAND                                           \
  88         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
  89         "nfsroot=$serverip:$rootpath "                                  \
  90         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
  91                 "run __nfsboot"
  92
  93 #ifdef CONFIG_FIT
  94 #define CONFIG_BOOTFILE                 "fitImage"
  95 #define KERNEL_ADDR_R_OFFSET            "0x05100000"
  96 #define LINUXBOOT_ENV_SETTINGS \
  97         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
  98                 "bootm $kernel_addr_r\0" \
  99         "__nfsboot=run tftpboot\0"
 100 #else
 101 #ifdef CONFIG_ARM64
 102 #define CONFIG_BOOTFILE                 "Image"
 103 #define LINUXBOOT_CMD                   "booti"
 104 #define KERNEL_ADDR_R_OFFSET            "0x02080000"
 105 #else
 106 #define CONFIG_BOOTFILE                 "zImage"
 107 #define LINUXBOOT_CMD                   "bootz"
 108 #define KERNEL_ADDR_R_OFFSET            "0x00208000"
 109 #endif
 110 #define LINUXBOOT_ENV_SETTINGS \
 111         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
 112                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 113         "tftpboot=tftpboot $kernel_addr_r $bootfile && " \
 114                 "tftpboot $fdt_addr_r $fdtfile &&" \
 115                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 116                 "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
 117                 "run boot_common\0" \
 118         "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
 119                 "tftpboot $fdt_addr_r $fdtfile &&" \
 120                 "setenv ramdisk_addr_r - &&" \
 121                 "run boot_common\0"
 122 #endif
 123
 124 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 125         "fdt_addr_r_offset=0x05100000\0" \
 126         "kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
 127         "ramdisk_addr_r_offset=0x06000000\0" \
 128         "ramdisk_file=rootfs.cpio.gz\0" \
 129         "netdev=eth0\0"                                         \
 130         "initrd_high=0xffffffffffffffff\0"                      \
 131         "loadaddr_offset=0x05000000\0" \
 132         "script=boot.scr\0" \
 133         "scriptaddr=0x85000000\0"                               \
 134         "nor_base=0x42000000\0"                                 \
 135         "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
 136         "nandboot=run bootcmd_ubifs0\0" \
 137         "norboot=run tftpboot\0" \
 138         "sdboot=sdsetn && run bootcmd_mmc${sd_first_dev}\0" \
 139         "usbboot=run bootcmd_usb0\0" \
 140         "emmcscript=setenv devtype mmc && " \
 141                 "mmcsetn && " \
 142                 "setenv devnum ${mmc_first_dev} && " \
 143                 "run loadscript_fat\0" \
 144         "nandscript=echo Running ${script} from ubi ... && " \
 145                 "ubi part UBI && " \
 146                 "ubifsmount ubi0:boot && " \
 147                 "ubifsload ${loadaddr} ${script} && " \
 148                 "source $loadaddr\0" \
 149         "sdscript=setenv devtype mmc && " \
 150                 "sdsetn && " \
 151                 "setenv devnum ${sd_first_dev} && " \
 152                 "run loadscript_fat\0" \
 153         "norscript=echo Running ${script} from tftp ... && " \
 154                 "tftpboot ${script} &&" \
 155                 "source $loadaddr\0" \
 156         "usbscript=usb start && " \
 157                 "setenv devtype usb && " \
 158                 "setenv devnum 0 && " \
 159                 "run loadscript_fat\0" \
 160         "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
 161                 "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
 162                 "source $loadaddr\0" \
 163         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 164                 "tftpboot $tmp_addr $second_image && " \
 165                 "setexpr tmp_addr $nor_base + 0x70000 && " \
 166                 "tftpboot $tmp_addr $third_image\0" \
 167         "emmcupdate=mmcsetn &&"                                 \
 168                 "mmc dev $mmc_first_dev &&"                     \
 169                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 170                 "tftpboot $second_image && " \
 171                 "mmc write $loadaddr 0 100 && " \
 172                 "tftpboot $third_image && " \
 173                 "mmc write $loadaddr 100 f00\0" \
 174         "nandupdate=nand erase 0 0x00100000 &&"                 \
 175                 "tftpboot $second_image && " \
 176                 "nand write $loadaddr 0 0x00020000 && " \
 177                 "tftpboot $third_image && " \
 178                 "nand write $loadaddr 0x00020000 0x001e0000\0" \
 179         "sdupdate=sdsetn &&" \
 180                 "mmc dev $sd_first_dev &&" \
 181                 "tftpboot $second_image && " \
 182                 "mmc write $loadaddr 0 100 && " \
 183                 "tftpboot $third_image && " \
 184                 "mmc write $loadaddr 100 f00\0" \
 185         "usbupdate=usb start &&" \
 186                 "tftpboot $second_image && " \
 187                 "usb write $loadaddr 0 100 && " \
 188                 "tftpboot $third_image && " \
 189                 "usb write $loadaddr 100 f00\0" \
 190         BOOT_IMAGES \
 191         LINUXBOOT_ENV_SETTINGS \
 192         BOOTENV
 193
 194 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 195
 196 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 197
 198 /* only for SPL */
 199 #define CONFIG_SPL_STACK                (0x00100000)
 200
 201 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x20000
 202
 203 /* subtract sizeof(struct image_header) */
 204 #define CONFIG_SYS_UBOOT_BASE                   (0x130000 - 0x40)
 205
 206 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 207 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 208 #define CONFIG_SPL_MAX_SIZE                     0x10000
 209 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 210
 211 #define CONFIG_SPL_PAD_TO                       0x20000
 212
 213 #endif /* __CONFIG_UNIPHIER_H__ */