include/configs/udoo.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for Udoo board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #include "imx6_spl.h"
  14
  15 /* Provide the MACH_TYPE value that the vendor kernel requires. */
  16 #define CONFIG_MACH_TYPE                4800
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  20
  21 #define CONFIG_MXC_UART
  22 #define CONFIG_MXC_UART_BASE            UART2_BASE
  23
  24 /* SATA Configs */
  25
  26 #ifdef CONFIG_CMD_SATA
  27 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  28 #define CONFIG_DWC_AHSATA_PORT_ID       0
  29 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  30 #define CONFIG_LBA48
  31 #endif
  32
  33 /* Network support */
  34
  35 #define CONFIG_FEC_MXC
  36 #define CONFIG_MII
  37 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  38 #define CONFIG_FEC_XCV_TYPE             RGMII
  39 #define CONFIG_ETHPRIME                 "FEC"
  40 #define CONFIG_FEC_MXC_PHYADDR          6
  41
  42 #define CONFIG_SYS_MEMTEST_START        0x10000000
  43 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  44
  45 /* MMC Configuration */
  46 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  47
  48 #define CONFIG_EXTRA_ENV_SETTINGS \
  49         "script=boot.scr\0" \
  50         "image=zImage\0" \
  51         "console=ttymxc1\0" \
  52         "splashpos=m,m\0" \
  53         "fdt_high=0xffffffff\0" \
  54         "initrd_high=0xffffffff\0" \
  55         "fdt_file=undefined\0" \
  56         "fdt_addr=0x18000000\0" \
  57         "boot_fdt=try\0" \
  58         "ip_dyn=yes\0" \
  59         "mmcdev=0\0" \
  60         "mmcpart=1\0" \
  61         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  62         "update_sd_firmware_filename=u-boot.imx\0" \
  63         "update_sd_firmware=" \
  64                 "if test ${ip_dyn} = yes; then " \
  65                         "setenv get_cmd dhcp; " \
  66                 "else " \
  67                         "setenv get_cmd tftp; " \
  68                 "fi; " \
  69                 "if mmc dev ${mmcdev}; then "   \
  70                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  71                                 "setexpr fw_sz ${filesize} / 0x200; " \
  72                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  73                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  74                         "fi; "  \
  75                 "fi\0" \
  76         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  77                 "root=${mmcroot}\0" \
  78         "loadbootscript=" \
  79                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  80         "bootscript=echo Running bootscript from mmc ...; " \
  81                 "source\0" \
  82         "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  83         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  84         "mmcboot=echo Booting from mmc ...; " \
  85                 "run mmcargs; " \
  86                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  87                         "if run loadfdt; then " \
  88                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  89                         "else " \
  90                                 "if test ${boot_fdt} = try; then " \
  91                                         "bootz; " \
  92                                 "else " \
  93                                         "echo WARN: Cannot load the DT; " \
  94                                 "fi; " \
  95                         "fi; " \
  96                 "else " \
  97                         "bootz; " \
  98                 "fi;\0" \
  99         "netargs=setenv bootargs console=${console},${baudrate} " \
 100                 "root=/dev/nfs " \
 101         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 102                 "netboot=echo Booting from net ...; " \
 103                 "run netargs; " \
 104                 "if test ${ip_dyn} = yes; then " \
 105                         "setenv get_cmd dhcp; " \
 106                 "else " \
 107                         "setenv get_cmd tftp; " \
 108                 "fi; " \
 109                 "${get_cmd} ${image}; " \
 110                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 111                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 112                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 113                         "else " \
 114                                 "if test ${boot_fdt} = try; then " \
 115                                         "bootz; " \
 116                                 "else " \
 117                                         "echo WARN: Cannot load the DT; " \
 118                                 "fi; " \
 119                         "fi; " \
 120                 "else " \
 121                         "bootz; " \
 122                 "fi;\0" \
 123                 "findfdt=" \
 124                         "if test $board_rev = MX6Q ; then " \
 125                                 "setenv fdt_file imx6q-udoo.dtb; fi; " \
 126                         "if test $board_rev = MX6DL ; then " \
 127                                 "setenv fdt_file imx6dl-udoo.dtb; fi; " \
 128                         "if test $fdt_file = undefined; then " \
 129                                 "echo WARNING: Could not determine dtb to use; fi; \0"
 130
 131 #define CONFIG_BOOTCOMMAND \
 132            "run findfdt; " \
 133            "mmc dev ${mmcdev}; if mmc rescan; then " \
 134                    "if run loadbootscript; then " \
 135                            "run bootscript; " \
 136                    "else " \
 137                            "if run loadimage; then " \
 138                                    "run mmcboot; " \
 139                            "else run netboot; " \
 140                            "fi; " \
 141                    "fi; " \
 142            "else run netboot; fi"
 143
 144 /* Physical Memory Map */
 145 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 146
 147 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 148 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 149 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 150
 151 #define CONFIG_SYS_INIT_SP_OFFSET \
 152         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 153 #define CONFIG_SYS_INIT_SP_ADDR \
 154         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 155
 156 /* Environment organization */
 157 #define CONFIG_ENV_SIZE                 (8 * 1024)
 158
 159 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 160 #define CONFIG_SYS_MMC_ENV_DEV          0
 161
 162 #endif                         /* __CONFIG_H * */