include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define MACH_TYPE_UDOO          4800
  15 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_MXC_UART_BASE            UART2_BASE
  24
  25 /* SATA Configs */
  26
  27 #define CONFIG_CMD_SATA
  28 #ifdef CONFIG_CMD_SATA
  29 #define CONFIG_DWC_AHSATA
  30 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  31 #define CONFIG_DWC_AHSATA_PORT_ID       0
  32 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  33 #define CONFIG_LBA48
  34 #define CONFIG_LIBATA
  35 #endif
  36
  37 /* Network support */
  38
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_DHCP
  41 #define CONFIG_CMD_MII
  42 #define CONFIG_CMD_NET
  43 #define CONFIG_FEC_MXC
  44 #define CONFIG_MII
  45 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  46 #define CONFIG_FEC_XCV_TYPE             RGMII
  47 #define CONFIG_ETHPRIME                 "FEC"
  48 #define CONFIG_FEC_MXC_PHYADDR          6
  49 #define CONFIG_PHYLIB
  50 #define CONFIG_PHY_MICREL
  51 #define CONFIG_PHY_MICREL_KSZ9031
  52
  53 /* Command definition */
  54 #define CONFIG_CMD_BMODE
  55 #define CONFIG_CMD_SETEXPR
  56
  57 #define CONFIG_SYS_MEMTEST_START        0x10000000
  58 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  59
  60 /* MMC Configuration */
  61 #define CONFIG_FSL_ESDHC
  62 #define CONFIG_FSL_USDHC
  63 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  64
  65 #define CONFIG_MMC
  66 #define CONFIG_CMD_MMC
  67 #define CONFIG_GENERIC_MMC
  68 #define CONFIG_BOUNCE_BUFFER
  69 #define CONFIG_CMD_EXT2
  70 #define CONFIG_CMD_FAT
  71 #define CONFIG_DOS_PARTITION
  72
  73 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
  74
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         "script=boot.scr\0" \
  77         "image=zImage\0" \
  78         "console=ttymxc1\0" \
  79         "splashpos=m,m\0" \
  80         "fdt_high=0xffffffff\0" \
  81         "initrd_high=0xffffffff\0" \
  82         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  83         "fdt_addr=0x18000000\0" \
  84         "boot_fdt=try\0" \
  85         "ip_dyn=yes\0" \
  86         "mmcdev=0\0" \
  87         "mmcpart=1\0" \
  88         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  89         "update_sd_firmware_filename=u-boot.imx\0" \
  90         "update_sd_firmware=" \
  91                 "if test ${ip_dyn} = yes; then " \
  92                         "setenv get_cmd dhcp; " \
  93                 "else " \
  94                         "setenv get_cmd tftp; " \
  95                 "fi; " \
  96                 "if mmc dev ${mmcdev}; then "   \
  97                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  98                                 "setexpr fw_sz ${filesize} / 0x200; " \
  99                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 100                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 101                         "fi; "  \
 102                 "fi\0" \
 103         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 104                 "root=${mmcroot}\0" \
 105         "loadbootscript=" \
 106                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 107         "bootscript=echo Running bootscript from mmc ...; " \
 108                 "source\0" \
 109         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 110         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 111         "mmcboot=echo Booting from mmc ...; " \
 112                 "run mmcargs; " \
 113                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 114                         "if run loadfdt; then " \
 115                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 116                         "else " \
 117                                 "if test ${boot_fdt} = try; then " \
 118                                         "bootz; " \
 119                                 "else " \
 120                                         "echo WARN: Cannot load the DT; " \
 121                                 "fi; " \
 122                         "fi; " \
 123                 "else " \
 124                         "bootz; " \
 125                 "fi;\0" \
 126         "netargs=setenv bootargs console=${console},${baudrate} " \
 127                 "root=/dev/nfs " \
 128         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 129                 "netboot=echo Booting from net ...; " \
 130                 "run netargs; " \
 131                 "if test ${ip_dyn} = yes; then " \
 132                         "setenv get_cmd dhcp; " \
 133                 "else " \
 134                         "setenv get_cmd tftp; " \
 135                 "fi; " \
 136                 "${get_cmd} ${image}; " \
 137                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 138                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 139                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 140                         "else " \
 141                                 "if test ${boot_fdt} = try; then " \
 142                                         "bootz; " \
 143                                 "else " \
 144                                         "echo WARN: Cannot load the DT; " \
 145                                 "fi; " \
 146                         "fi; " \
 147                 "else " \
 148                         "bootz; " \
 149                 "fi;\0"
 150
 151 #define CONFIG_BOOTCOMMAND \
 152            "mmc dev ${mmcdev}; if mmc rescan; then " \
 153                    "if run loadbootscript; then " \
 154                            "run bootscript; " \
 155                    "else " \
 156                            "if run loadimage; then " \
 157                                    "run mmcboot; " \
 158                            "else run netboot; " \
 159                            "fi; " \
 160                    "fi; " \
 161            "else run netboot; fi"
 162
 163 /* Print Buffer Size */
 164 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 165
 166 /* Physical Memory Map */
 167 #define CONFIG_NR_DRAM_BANKS            1
 168 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 169
 170 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 171 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 172 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 173
 174 #define CONFIG_SYS_INIT_SP_OFFSET \
 175         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 176 #define CONFIG_SYS_INIT_SP_ADDR \
 177         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 178
 179 /* Environment organization */
 180 #define CONFIG_ENV_SIZE                 (8 * 1024)
 181
 182 #define CONFIG_ENV_IS_IN_MMC
 183 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 184 #define CONFIG_SYS_MMC_ENV_DEV          0
 185
 186 #define CONFIG_OF_LIBFDT
 187 #define CONFIG_CMD_BOOTZ
 188
 189 #ifndef CONFIG_SYS_DCACHE_OFF
 190 #define CONFIG_CMD_CACHE
 191 #endif
 192
 193 #endif                         /* __CONFIG_H * */