include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_MX6
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define MACH_TYPE_UDOO          4800
  19 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  20
  21 #define CONFIG_CMDLINE_TAG
  22 #define CONFIG_SETUP_MEMORY_TAGS
  23 #define CONFIG_INITRD_TAG
  24 #define CONFIG_REVISION_TAG
  25
  26 #define CONFIG_SYS_GENERIC_BOARD
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  30
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_MXC_GPIO
  33
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_MXC_UART_BASE            UART2_BASE
  36
  37 /* SATA Configs */
  38
  39 #define CONFIG_CMD_SATA
  40 #ifdef CONFIG_CMD_SATA
  41 #define CONFIG_DWC_AHSATA
  42 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  43 #define CONFIG_DWC_AHSATA_PORT_ID       0
  44 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  45 #define CONFIG_LBA48
  46 #define CONFIG_LIBATA
  47 #endif
  48
  49 /* Network support */
  50
  51 #define CONFIG_CMD_PING
  52 #define CONFIG_CMD_DHCP
  53 #define CONFIG_CMD_MII
  54 #define CONFIG_CMD_NET
  55 #define CONFIG_FEC_MXC
  56 #define CONFIG_MII
  57 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  58 #define CONFIG_FEC_XCV_TYPE             RGMII
  59 #define CONFIG_ETHPRIME                 "FEC"
  60 #define CONFIG_FEC_MXC_PHYADDR          6
  61 #define CONFIG_PHYLIB
  62 #define CONFIG_PHY_MICREL
  63 #define CONFIG_PHY_MICREL_KSZ9031
  64
  65 /* allow to overwrite serial and ethaddr */
  66 #define CONFIG_ENV_OVERWRITE
  67 #define CONFIG_CONS_INDEX               1
  68 #define CONFIG_BAUDRATE                 115200
  69
  70 /* Command definition */
  71
  72 #define CONFIG_CMD_BMODE
  73 #define CONFIG_CMD_SETEXPR
  74
  75 #define CONFIG_BOOTDELAY                3
  76
  77 #define CONFIG_SYS_MEMTEST_START        0x10000000
  78 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  79 #define CONFIG_LOADADDR                 0x12000000
  80 #define CONFIG_SYS_TEXT_BASE            0x17800000
  81
  82 /* MMC Configuration */
  83 #define CONFIG_FSL_ESDHC
  84 #define CONFIG_FSL_USDHC
  85 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  86
  87 #define CONFIG_MMC
  88 #define CONFIG_CMD_MMC
  89 #define CONFIG_GENERIC_MMC
  90 #define CONFIG_BOUNCE_BUFFER
  91 #define CONFIG_CMD_EXT2
  92 #define CONFIG_CMD_FAT
  93 #define CONFIG_DOS_PARTITION
  94
  95 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
  96
  97 #define CONFIG_EXTRA_ENV_SETTINGS \
  98         "script=boot.scr\0" \
  99         "image=zImage\0" \
 100         "console=ttymxc1\0" \
 101         "splashpos=m,m\0" \
 102         "fdt_high=0xffffffff\0" \
 103         "initrd_high=0xffffffff\0" \
 104         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 105         "fdt_addr=0x18000000\0" \
 106         "boot_fdt=try\0" \
 107         "ip_dyn=yes\0" \
 108         "mmcdev=0\0" \
 109         "mmcpart=1\0" \
 110         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 111         "update_sd_firmware_filename=u-boot.imx\0" \
 112         "update_sd_firmware=" \
 113                 "if test ${ip_dyn} = yes; then " \
 114                         "setenv get_cmd dhcp; " \
 115                 "else " \
 116                         "setenv get_cmd tftp; " \
 117                 "fi; " \
 118                 "if mmc dev ${mmcdev}; then "   \
 119                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 120                                 "setexpr fw_sz ${filesize} / 0x200; " \
 121                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 122                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 123                         "fi; "  \
 124                 "fi\0" \
 125         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 126                 "root=${mmcroot}\0" \
 127         "loadbootscript=" \
 128                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 129         "bootscript=echo Running bootscript from mmc ...; " \
 130                 "source\0" \
 131         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 132         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 133         "mmcboot=echo Booting from mmc ...; " \
 134                 "run mmcargs; " \
 135                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 136                         "if run loadfdt; then " \
 137                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 138                         "else " \
 139                                 "if test ${boot_fdt} = try; then " \
 140                                         "bootz; " \
 141                                 "else " \
 142                                         "echo WARN: Cannot load the DT; " \
 143                                 "fi; " \
 144                         "fi; " \
 145                 "else " \
 146                         "bootz; " \
 147                 "fi;\0" \
 148         "netargs=setenv bootargs console=${console},${baudrate} " \
 149                 "root=/dev/nfs " \
 150         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 151                 "netboot=echo Booting from net ...; " \
 152                 "run netargs; " \
 153                 "if test ${ip_dyn} = yes; then " \
 154                         "setenv get_cmd dhcp; " \
 155                 "else " \
 156                         "setenv get_cmd tftp; " \
 157                 "fi; " \
 158                 "${get_cmd} ${image}; " \
 159                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 160                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 161                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 162                         "else " \
 163                                 "if test ${boot_fdt} = try; then " \
 164                                         "bootz; " \
 165                                 "else " \
 166                                         "echo WARN: Cannot load the DT; " \
 167                                 "fi; " \
 168                         "fi; " \
 169                 "else " \
 170                         "bootz; " \
 171                 "fi;\0"
 172
 173 #define CONFIG_BOOTCOMMAND \
 174            "mmc dev ${mmcdev}; if mmc rescan; then " \
 175                    "if run loadbootscript; then " \
 176                            "run bootscript; " \
 177                    "else " \
 178                            "if run loadimage; then " \
 179                                    "run mmcboot; " \
 180                            "else run netboot; " \
 181                            "fi; " \
 182                    "fi; " \
 183            "else run netboot; fi"
 184
 185 /* Miscellaneous configurable options */
 186 #define CONFIG_SYS_LONGHELP
 187 #define CONFIG_SYS_HUSH_PARSER
 188 #define CONFIG_AUTO_COMPLETE
 189 #define CONFIG_SYS_CBSIZE               256
 190
 191 /* Print Buffer Size */
 192 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 193 #define CONFIG_SYS_MAXARGS             16
 194 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 195
 196 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 197
 198 #define CONFIG_CMDLINE_EDITING
 199
 200 /* Physical Memory Map */
 201 #define CONFIG_NR_DRAM_BANKS            1
 202 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 203
 204 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 205 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 206 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 207
 208 #define CONFIG_SYS_INIT_SP_OFFSET \
 209         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 210 #define CONFIG_SYS_INIT_SP_ADDR \
 211         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 212
 213 /* Environment organization */
 214 #define CONFIG_ENV_SIZE                 (8 * 1024)
 215
 216 #define CONFIG_ENV_IS_IN_MMC
 217 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 218 #define CONFIG_SYS_MMC_ENV_DEV          0
 219
 220 #define CONFIG_OF_LIBFDT
 221 #define CONFIG_CMD_BOOTZ
 222
 223 #ifndef CONFIG_SYS_DCACHE_OFF
 224 #define CONFIG_CMD_CACHE
 225 #endif
 226
 227 #endif                         /* __CONFIG_H * */