include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/imx-common/gpio.h>
  15 #include <linux/sizes.h>
  16
  17 #define CONFIG_MX6
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DISPLAY_BOARDINFO
  20
  21 #define MACH_TYPE_UDOO          4800
  22 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  23
  24 #define CONFIG_CMDLINE_TAG
  25 #define CONFIG_SETUP_MEMORY_TAGS
  26 #define CONFIG_INITRD_TAG
  27 #define CONFIG_REVISION_TAG
  28
  29 #define CONFIG_SYS_GENERIC_BOARD
  30
  31 /* Size of malloc() pool */
  32 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  33
  34 #define CONFIG_BOARD_EARLY_INIT_F
  35 #define CONFIG_MXC_GPIO
  36
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE            UART2_BASE
  39
  40 /* SATA Configs */
  41
  42 #define CONFIG_CMD_SATA
  43 #ifdef CONFIG_CMD_SATA
  44 #define CONFIG_DWC_AHSATA
  45 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  46 #define CONFIG_DWC_AHSATA_PORT_ID       0
  47 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  48 #define CONFIG_LBA48
  49 #define CONFIG_LIBATA
  50 #endif
  51
  52 /* Network support */
  53
  54 #define CONFIG_CMD_PING
  55 #define CONFIG_CMD_DHCP
  56 #define CONFIG_CMD_MII
  57 #define CONFIG_CMD_NET
  58 #define CONFIG_FEC_MXC
  59 #define CONFIG_MII
  60 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  61 #define CONFIG_FEC_XCV_TYPE             RGMII
  62 #define CONFIG_ETHPRIME                 "FEC"
  63 #define CONFIG_FEC_MXC_PHYADDR          6
  64 #define CONFIG_PHYLIB
  65 #define CONFIG_PHY_MICREL
  66 #define CONFIG_PHY_MICREL_KSZ9031
  67
  68 /* allow to overwrite serial and ethaddr */
  69 #define CONFIG_ENV_OVERWRITE
  70 #define CONFIG_CONS_INDEX               1
  71 #define CONFIG_BAUDRATE                 115200
  72
  73 /* Command definition */
  74 #include <config_cmd_default.h>
  75
  76 #undef CONFIG_CMD_IMLS
  77
  78 #define CONFIG_CMD_BMODE
  79 #define CONFIG_CMD_SETEXPR
  80
  81 #define CONFIG_BOOTDELAY                3
  82
  83 #define CONFIG_SYS_MEMTEST_START        0x10000000
  84 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  85 #define CONFIG_LOADADDR                 0x12000000
  86 #define CONFIG_SYS_TEXT_BASE            0x17800000
  87
  88 /* MMC Configuration */
  89 #define CONFIG_FSL_ESDHC
  90 #define CONFIG_FSL_USDHC
  91 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  92
  93 #define CONFIG_MMC
  94 #define CONFIG_CMD_MMC
  95 #define CONFIG_GENERIC_MMC
  96 #define CONFIG_BOUNCE_BUFFER
  97 #define CONFIG_CMD_EXT2
  98 #define CONFIG_CMD_FAT
  99 #define CONFIG_DOS_PARTITION
 100
 101 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
 102
 103 #define CONFIG_EXTRA_ENV_SETTINGS \
 104         "script=boot.scr\0" \
 105         "image=zImage\0" \
 106         "console=ttymxc1\0" \
 107         "splashpos=m,m\0" \
 108         "fdt_high=0xffffffff\0" \
 109         "initrd_high=0xffffffff\0" \
 110         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 111         "fdt_addr=0x18000000\0" \
 112         "boot_fdt=try\0" \
 113         "ip_dyn=yes\0" \
 114         "mmcdev=0\0" \
 115         "mmcpart=1\0" \
 116         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 117         "update_sd_firmware_filename=u-boot.imx\0" \
 118         "update_sd_firmware=" \
 119                 "if test ${ip_dyn} = yes; then " \
 120                         "setenv get_cmd dhcp; " \
 121                 "else " \
 122                         "setenv get_cmd tftp; " \
 123                 "fi; " \
 124                 "if mmc dev ${mmcdev}; then "   \
 125                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 126                                 "setexpr fw_sz ${filesize} / 0x200; " \
 127                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 128                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 129                         "fi; "  \
 130                 "fi\0" \
 131         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 132                 "root=${mmcroot}\0" \
 133         "loadbootscript=" \
 134                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 135         "bootscript=echo Running bootscript from mmc ...; " \
 136                 "source\0" \
 137         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 138         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 139         "mmcboot=echo Booting from mmc ...; " \
 140                 "run mmcargs; " \
 141                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 142                         "if run loadfdt; then " \
 143                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 144                         "else " \
 145                                 "if test ${boot_fdt} = try; then " \
 146                                         "bootz; " \
 147                                 "else " \
 148                                         "echo WARN: Cannot load the DT; " \
 149                                 "fi; " \
 150                         "fi; " \
 151                 "else " \
 152                         "bootz; " \
 153                 "fi;\0" \
 154         "netargs=setenv bootargs console=${console},${baudrate} " \
 155                 "root=/dev/nfs " \
 156         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 157                 "netboot=echo Booting from net ...; " \
 158                 "run netargs; " \
 159                 "if test ${ip_dyn} = yes; then " \
 160                         "setenv get_cmd dhcp; " \
 161                 "else " \
 162                         "setenv get_cmd tftp; " \
 163                 "fi; " \
 164                 "${get_cmd} ${image}; " \
 165                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 166                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 167                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 168                         "else " \
 169                                 "if test ${boot_fdt} = try; then " \
 170                                         "bootz; " \
 171                                 "else " \
 172                                         "echo WARN: Cannot load the DT; " \
 173                                 "fi; " \
 174                         "fi; " \
 175                 "else " \
 176                         "bootz; " \
 177                 "fi;\0"
 178
 179 #define CONFIG_BOOTCOMMAND \
 180            "mmc dev ${mmcdev}; if mmc rescan; then " \
 181                    "if run loadbootscript; then " \
 182                            "run bootscript; " \
 183                    "else " \
 184                            "if run loadimage; then " \
 185                                    "run mmcboot; " \
 186                            "else run netboot; " \
 187                            "fi; " \
 188                    "fi; " \
 189            "else run netboot; fi"
 190
 191 /* Miscellaneous configurable options */
 192 #define CONFIG_SYS_LONGHELP
 193 #define CONFIG_SYS_HUSH_PARSER
 194 #define CONFIG_SYS_PROMPT              "=> "
 195 #define CONFIG_AUTO_COMPLETE
 196 #define CONFIG_SYS_CBSIZE               256
 197
 198 /* Print Buffer Size */
 199 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 200 #define CONFIG_SYS_MAXARGS             16
 201 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 202
 203 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 204
 205 #define CONFIG_CMDLINE_EDITING
 206
 207 /* Physical Memory Map */
 208 #define CONFIG_NR_DRAM_BANKS            1
 209 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 210
 211 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 212 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 213 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 214
 215 #define CONFIG_SYS_INIT_SP_OFFSET \
 216         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 217 #define CONFIG_SYS_INIT_SP_ADDR \
 218         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 219
 220 /* FLASH and environment organization */
 221 #define CONFIG_SYS_NO_FLASH
 222
 223 #define CONFIG_ENV_SIZE                 (8 * 1024)
 224
 225 #define CONFIG_ENV_IS_IN_MMC
 226 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 227 #define CONFIG_SYS_MMC_ENV_DEV          0
 228
 229 #define CONFIG_OF_LIBFDT
 230 #define CONFIG_CMD_BOOTZ
 231
 232 #ifndef CONFIG_SYS_DCACHE_OFF
 233 #define CONFIG_CMD_CACHE
 234 #endif
 235
 236 #endif                         /* __CONFIG_H * */