include/configs/udoo.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for Udoo board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #include "imx6_spl.h"
  14
  15 /* Provide the MACH_TYPE value that the vendor kernel requires. */
  16 #define CONFIG_MACH_TYPE                4800
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  20
  21 #define CONFIG_MXC_UART_BASE            UART2_BASE
  22
  23 /* SATA Configs */
  24 #define CONFIG_LBA48
  25
  26 /* MMC Configuration */
  27 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  28
  29 #define CONFIG_EXTRA_ENV_SETTINGS \
  30         "console=ttymxc1,115200\0" \
  31         "fdt_high=0xffffffff\0" \
  32         "initrd_high=0xffffffff\0" \
  33         "fdtfile=undefined\0" \
  34         "fdt_addr=0x18000000\0" \
  35         "fdt_addr_r=0x18000000\0" \
  36         "ip_dyn=yes\0" \
  37         "mmcdev=0\0" \
  38         "mmcrootfstype=ext4\0" \
  39         "findfdt="\
  40                 "if test ${board_rev} = MX6Q; then " \
  41                         "setenv fdtfile imx6q-udoo.dtb; fi; " \
  42                 "if test ${board_rev} = MX6DL; then " \
  43                         "setenv fdtfile imx6dl-udoo.dtb; fi; " \
  44                 "if test ${fdtfile} = undefined; then " \
  45                         "echo WARNING: Could not determine dtb to use; fi\0" \
  46         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  47         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  48         "ramdisk_addr_r=0x13000000\0" \
  49         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  50         BOOTENV
  51
  52 #define BOOT_TARGET_DEVICES(func) \
  53         func(MMC, mmc, 0) \
  54         func(SATA, sata, 0) \
  55         func(DHCP, dhcp, na)
  56
  57 #include <config_distro_bootcmd.h>
  58 #include <linux/stringify.h>
  59
  60 /* Physical Memory Map */
  61 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  62
  63 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  64 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  65 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  66
  67 #define CONFIG_SYS_INIT_SP_OFFSET \
  68         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  69 #define CONFIG_SYS_INIT_SP_ADDR \
  70         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  71
  72 /* Environment organization */
  73
  74 #endif                         /* __CONFIG_H * */