imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h
[platform/kernel/u-boot.git] / include / configs / udoo.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2013 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for Udoo board.
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include "mx6_common.h"
12
13 #define CONFIG_MXC_UART_BASE            UART2_BASE
14
15 /* MMC Configuration */
16 #define CFG_SYS_FSL_ESDHC_ADDR  0
17
18 #define CONFIG_EXTRA_ENV_SETTINGS \
19         "console=ttymxc1,115200\0" \
20         "fdt_high=0xffffffff\0" \
21         "initrd_high=0xffffffff\0" \
22         "fdtfile=undefined\0" \
23         "fdt_addr=0x18000000\0" \
24         "fdt_addr_r=0x18000000\0" \
25         "ip_dyn=yes\0" \
26         "mmcdev=2\0" \
27         "mmcrootfstype=ext4\0" \
28         "findfdt="\
29                 "if test ${board_rev} = MX6Q; then " \
30                         "setenv fdtfile imx6q-udoo.dtb; fi; " \
31                 "if test ${board_rev} = MX6DL; then " \
32                         "setenv fdtfile imx6dl-udoo.dtb; fi; " \
33                 "if test ${fdtfile} = undefined; then " \
34                         "echo WARNING: Could not determine dtb to use; fi\0" \
35         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
36         "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
37         "ramdisk_addr_r=0x13000000\0" \
38         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
39         BOOTENV
40
41 #define BOOT_TARGET_DEVICES(func) \
42         func(MMC, mmc, 2) \
43         func(SATA, sata, 0) \
44         func(DHCP, dhcp, na)
45
46 #include <config_distro_bootcmd.h>
47 #include <linux/stringify.h>
48
49 /* Physical Memory Map */
50 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
51
52 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
53 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
54 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
55
56 /* Environment organization */
57
58 #endif                         /* __CONFIG_H * */