include/configs/u8500_href.h

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2009
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * High Level Configuration Options
  12  * (easy to change)
  13  */
  14 #define CONFIG_U8500
  15
  16 #define CONFIG_SYS_MEMTEST_START        0x00000000
  17 #define CONFIG_SYS_MEMTEST_END  0x1FFFFFFF
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 /*
  23  * Size of malloc() pool
  24  */
  25 #ifdef CONFIG_BOOT_SRAM
  26 #define CONFIG_ENV_SIZE         (32*1024)
  27 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 64*1024)
  28 #else
  29 #define CONFIG_ENV_SIZE         (128*1024)
  30 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 256*1024)
  31 #endif
  32
  33 /*
  34  * PL011 Configuration
  35  */
  36 #define CONFIG_PL011_SERIAL
  37 #define CONFIG_PL011_SERIAL_RLCR
  38 #define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
  39
  40 /*
  41  * U8500 UART registers base for 3 serial devices
  42  */
  43 #define CFG_UART0_BASE          0x80120000
  44 #define CFG_UART1_BASE          0x80121000
  45 #define CFG_UART2_BASE          0x80007000
  46 #define CFG_SERIAL0             CFG_UART0_BASE
  47 #define CFG_SERIAL1             CFG_UART1_BASE
  48 #define CFG_SERIAL2             CFG_UART2_BASE
  49 #define CONFIG_PL011_CLOCK      38400000
  50 #define CONFIG_PL01x_PORTS      { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
  51                                   (void *)CFG_SERIAL2 }
  52 #define CONFIG_CONS_INDEX       2
  53 #define CONFIG_BAUDRATE         115200
  54
  55 /*
  56  * Devices and file systems
  57  */
  58 #define CONFIG_MMC
  59 #define CONFIG_GENERIC_MMC
  60 #define CONFIG_DOS_PARTITION
  61
  62 /*
  63  * Commands
  64  */
  65 #define CONFIG_CMD_MEMORY
  66 #define CONFIG_CMD_BOOTD
  67 #define CONFIG_CMD_BDI
  68 #define CONFIG_CMD_IMI
  69 #define CONFIG_CMD_MISC
  70 #define CONFIG_CMD_RUN
  71 #define CONFIG_CMD_ECHO
  72 #define CONFIG_CMD_CONSOLE
  73 #define CONFIG_CMD_LOADS
  74 #define CONFIG_CMD_LOADB
  75 #define CONFIG_CMD_MMC
  76 #define CONFIG_CMD_FAT
  77 #define CONFIG_CMD_EXT2
  78 #define CONFIG_CMD_SOURCE
  79 #define CONFIG_CMD_I2C
  80
  81 #ifndef CONFIG_BOOTDELAY
  82 #define CONFIG_BOOTDELAY        1
  83 #endif
  84 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
  85
  86 #undef CONFIG_BOOTARGS
  87 #define CONFIG_BOOTCOMMAND      "run emmcboot"
  88
  89 #define CONFIG_EXTRA_ENV_SETTINGS \
  90         "verify=n\0"                                                    \
  91         "loadaddr=0x00100000\0"                                         \
  92         "console=ttyAMA2,115200n8\0"                                    \
  93         "memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M "          \
  94                 "pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0"    \
  95         "memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M "          \
  96                 "pmem=22M@172M mem=30M@194M mem_mali=32M@224M "         \
  97                 "pmem_hwb=54M@256M mem=202M@310M\0"                     \
  98         "commonargs=setenv bootargs cachepolicy=writealloc noinitrd "   \
  99                 "init=init "                                            \
 100                 "board_id=${board_id} "                                 \
 101                 "logo.${logo} "                                         \
 102                 "startup_graphics=${startup_graphics}\0"                \
 103         "emmcargs=setenv bootargs ${bootargs} "                         \
 104                 "root=/dev/mmcblk0p2 "                                  \
 105                 "rootdelay=1\0"                                         \
 106         "addcons=setenv bootargs ${bootargs} "                          \
 107                 "console=${console}\0"                                  \
 108         "emmcboot=echo Booting from eMMC ...; "                         \
 109                 "run commonargs emmcargs addcons memargs;"              \
 110                 "mmc read 0 ${loadaddr} 0xA0000 0x4000;"                \
 111                 "bootm ${loadaddr}\0"                                   \
 112         "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;"         \
 113                 "source ${loadaddr}\0"                                  \
 114         "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0"      \
 115         "usbtty=cdc_acm\0"                                              \
 116         "stdout=serial,usbtty\0"                                        \
 117         "stdin=serial,usbtty\0"                                         \
 118         "stderr=serial,usbtty\0"
 119
 120 /*
 121  * Miscellaneous configurable options
 122  */
 123
 124 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 125 #define CONFIG_SYS_PROMPT       "U8500 $ "      /* Monitor Command Prompt   */
 126 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size  */
 127
 128 /* Print Buffer Size */
 129 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 130                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 131 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
 132 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 133
 134 #define CONFIG_SYS_LOAD_ADDR            0x00100000 /* default load address */
 135 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 136
 137 #define CONFIG_SYS_HUSH_PARSER
 138 #define CONFIG_CMDLINE_EDITING
 139
 140 #define CONFIG_SETUP_MEMORY_TAGS        2
 141 #define CONFIG_INITRD_TAG
 142 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs  */
 143
 144 /*
 145  * I2C
 146  */
 147 #define CONFIG_U8500_I2C
 148 #undef  CONFIG_HARD_I2C                 /* I2C with hardware support */
 149 #define CONFIG_I2C_MULTI_BUS
 150 #define CONFIG_SYS_I2C_SPEED            100000
 151 #define CONFIG_SYS_I2C_SLAVE            0       /* slave addr of controller */
 152 #define CONFIG_SYS_U8500_I2C0_BASE              0x80004000
 153 #define CONFIG_SYS_U8500_I2C1_BASE              0x80122000
 154 #define CONFIG_SYS_U8500_I2C2_BASE              0x80128000
 155 #define CONFIG_SYS_U8500_I2C3_BASE              0x80110000
 156 #define CONFIG_SYS_U8500_I2C_BUS_MAX            4
 157
 158 #define CONFIG_SYS_I2C_GPIOE_ADDR       0x42    /* GPIO expander chip addr */
 159 #define CONFIG_TC35892_GPIO
 160
 161 /*
 162  * Physical Memory Map
 163  */
 164 #define CONFIG_NR_DRAM_BANKS            1
 165 #define PHYS_SDRAM_1                    0x00000000      /* DDR-SDRAM Bank #1 */
 166 #define PHYS_SDRAM_SIZE_1               0x20000000      /* 512 MB */
 167
 168 /*
 169  * additions for new relocation code
 170  */
 171 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 172 #define CONFIG_SYS_INIT_RAM_SIZE        0x100000
 173 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_SDRAM_BASE + \
 174                                          CONFIG_SYS_INIT_RAM_SIZE - \
 175                                          GENERATED_GBL_DATA_SIZE)
 176 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_GBL_DATA_OFFSET
 177
 178 /* landing address before relocation */
 179 #ifndef CONFIG_SYS_TEXT_BASE
 180 #define CONFIG_SYS_TEXT_BASE            0x0
 181 #endif
 182
 183 /*
 184  * MMC related configs
 185  * NB Only externa SD slot is currently supported
 186  */
 187 #define MMC_BLOCK_SIZE                  512
 188 #define CONFIG_ARM_PL180_MMCI
 189 #define CONFIG_ARM_PL180_MMCI_BASE      0x80126000      /* MMC base for 8500  */
 190 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
 191 #define CONFIG_MMC_DEV_NUM              1
 192
 193 #define CONFIG_CMD_ENV
 194 #define CONFIG_CMD_SAVEENV      /* CMD_ENV is obsolete but used in env_emmc.c */
 195 #define CONFIG_ENV_IS_IN_MMC
 196 #define CONFIG_ENV_OFFSET               0x13F80000
 197 #define CONFIG_SYS_MMC_ENV_DEV          0               /* SLOT2: eMMC */
 198
 199 /*
 200  * FLASH and environment organization
 201  */
 202 #define CONFIG_SYS_NO_FLASH
 203
 204 /*
 205  * base register values for U8500
 206  */
 207 #define CFG_PRCMU_BASE          0x80157000      /* Power, reset and clock
 208                                                    management unit */
 209 #define CFG_FSMC_BASE           0x80000000      /* FSMC Controller */
 210
 211 #endif  /* __CONFIG_H */