mmc: move more driver config options to Kconfig
[platform/kernel/u-boot.git] / include / configs / tricorder.h
1 /*
2  * (C) Copyright 2006-2008
3  * Texas Instruments.
4  * Richard Woodruff <r-woodruff2@ti.com>
5  * Syed Mohammed Khasim <x0khasim@ti.com>
6  *
7  * (C) Copyright 2012
8  * Corscience GmbH & Co. KG
9  * Thomas Weber <weber@corscience.de>
10  *
11  * Configuration settings for the Tricorder board.
12  *
13  * SPDX-License-Identifier:     GPL-2.0+
14  */
15
16 #ifndef __CONFIG_H
17 #define __CONFIG_H
18
19 /* High Level Configuration Options */
20 #define CONFIG_SYS_THUMB_BUILD
21 #define CONFIG_OMAP                     /* in a TI OMAP core */
22 /* Common ARM Erratas */
23 #define CONFIG_ARM_ERRATA_454179
24 #define CONFIG_ARM_ERRATA_430973
25 #define CONFIG_ARM_ERRATA_621766
26
27 #define CONFIG_MACH_TYPE                MACH_TYPE_TRICORDER
28 /*
29  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
30  * 64 bytes before this address should be set aside for u-boot.img's
31  * header. That is 0x800FFFC0--0x80100000 should not be used for any
32  * other needs.
33  */
34 #define CONFIG_SYS_TEXT_BASE            0x80100000
35
36 #define CONFIG_SDRC                     /* The chip has SDRC controller */
37
38 #include <asm/arch/cpu.h>               /* get chip and board defs */
39 #include <asm/arch/omap.h>
40
41 /* Clock Defines */
42 #define V_OSCK                          26000000 /* Clock output from T2 */
43 #define V_SCLK                          (V_OSCK >> 1)
44
45 #define CONFIG_MISC_INIT_R
46
47 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
48 #define CONFIG_SETUP_MEMORY_TAGS
49 #define CONFIG_INITRD_TAG
50 #define CONFIG_REVISION_TAG
51
52 /* Size of malloc() pool */
53 #define CONFIG_SYS_MALLOC_LEN           (1024*1024)
54
55 /* Hardware drivers */
56
57 /* GPIO support */
58 #define CONFIG_OMAP_GPIO
59
60 /* GPIO banks */
61 #define CONFIG_OMAP3_GPIO_2             /* GPIO32..63 are in GPIO bank 2 */
62
63 /* LED support */
64 #define CONFIG_STATUS_LED
65 #define CONFIG_BOARD_SPECIFIC_LED
66 #define CONFIG_CMD_LED                  /* LED command */
67 #define STATUS_LED_BIT                  (1 << 0)
68 #define STATUS_LED_STATE                STATUS_LED_ON
69 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
70 #define STATUS_LED_BIT1                 (1 << 1)
71 #define STATUS_LED_STATE1               STATUS_LED_ON
72 #define STATUS_LED_PERIOD1              (CONFIG_SYS_HZ / 2)
73 #define STATUS_LED_BIT2                 (1 << 2)
74 #define STATUS_LED_STATE2               STATUS_LED_ON
75 #define STATUS_LED_PERIOD2              (CONFIG_SYS_HZ / 2)
76
77 /* NS16550 Configuration */
78 #define CONFIG_SYS_NS16550_SERIAL
79 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
80 #define CONFIG_SYS_NS16550_CLK          48000000 /* 48MHz (APLL96/2) */
81
82 /* select serial console configuration */
83 #define CONFIG_CONS_INDEX               3
84 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
85 #define CONFIG_SERIAL3                  3
86 #define CONFIG_BAUDRATE                 115200
87 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
88                                         115200}
89
90 /* MMC */
91 #define CONFIG_GENERIC_MMC
92 #define CONFIG_DOS_PARTITION
93
94 /* I2C */
95 #define CONFIG_SYS_I2C
96 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
97 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
98 #define CONFIG_SYS_I2C_OMAP34XX
99  
100
101 /* EEPROM */
102 #define CONFIG_CMD_EEPROM
103 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
104 #define CONFIG_SYS_EEPROM_BUS_NUM       1
105
106 /* TWL4030 */
107 #define CONFIG_TWL4030_POWER
108 #define CONFIG_TWL4030_LED
109
110 /* Board NAND Info */
111 #define CONFIG_SYS_NO_FLASH             /* no NOR flash */
112 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
113 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
114 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:" \
115                                                 "128k(SPL)," \
116                                                 "1m(u-boot)," \
117                                                 "384k(u-boot-env1)," \
118                                                 "1152k(mtdoops)," \
119                                                 "384k(u-boot-env2)," \
120                                                 "5m(kernel)," \
121                                                 "2m(fdt)," \
122                                                 "-(ubi)"
123
124 #define CONFIG_NAND_OMAP_GPMC
125 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
126                                                         /* to access nand */
127 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
128                                                         /* to access nand at */
129                                                         /* CS0 */
130 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
131                                                         /* devices */
132 #define CONFIG_BCH
133 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
134 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
135
136 /* commands to include */
137 #define CONFIG_CMD_MTDPARTS             /* Enable MTD parts commands */
138 #define CONFIG_CMD_NAND                 /* NAND support */
139 #define CONFIG_CMD_NAND_LOCK_UNLOCK     /* nand (un)lock commands */
140 #define CONFIG_CMD_UBIFS                /* UBIFS commands */
141 #define CONFIG_LZO                      /* LZO is needed for UBIFS */
142
143 #undef CONFIG_CMD_JFFS2                 /* JFFS2 Support */
144
145 /* needed for ubi */
146 #define CONFIG_RBTREE
147 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
148 #define CONFIG_MTD_PARTITIONS
149
150 /* Environment information (this is the common part) */
151
152
153 /* hang() the board on panic() */
154 #define CONFIG_PANIC_HANG
155
156 /* environment placement (for NAND), is different for FLASHCARD but does not
157  * harm there */
158 #define CONFIG_ENV_OFFSET               0x120000    /* env start */
159 #define CONFIG_ENV_OFFSET_REDUND        0x2A0000    /* redundant env start */
160 #define CONFIG_ENV_SIZE                 (16 << 10)  /* use 16KiB for env */
161 #define CONFIG_ENV_RANGE                (384 << 10) /* allow badblocks in env */
162
163 /* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend
164  * value can not be used here! */
165 #define CONFIG_LOADADDR         0x82000000
166
167 #define CONFIG_COMMON_ENV_SETTINGS \
168         "console=ttyO2,115200n8\0" \
169         "mmcdev=0\0" \
170         "vram=3M\0" \
171         "defaultdisplay=lcd\0" \
172         "kernelopts=mtdoops.mtddev=3\0" \
173         "mtdparts=" MTDPARTS_DEFAULT "\0" \
174         "mtdids=" MTDIDS_DEFAULT "\0" \
175         "commonargs=" \
176                 "setenv bootargs console=${console} " \
177                 "${mtdparts} " \
178                 "${kernelopts} " \
179                 "vt.global_cursor_default=0 " \
180                 "vram=${vram} " \
181                 "omapdss.def_disp=${defaultdisplay}\0"
182
183 #define CONFIG_BOOTCOMMAND "run autoboot"
184
185 /* specific environment settings for different use cases
186  * FLASHCARD: used to run a rdimage from sdcard to program the device
187  * 'NORMAL': used to boot kernel from sdcard, nand, ...
188  *
189  * The main aim for the FLASHCARD skin is to have an embedded environment
190  * which will not be influenced by any data already on the device.
191  */
192 #ifdef CONFIG_FLASHCARD
193
194 #define CONFIG_ENV_IS_NOWHERE
195
196 /* the rdaddr is 16 MiB before the loadaddr */
197 #define CONFIG_ENV_RDADDR       "rdaddr=0x81000000\0"
198
199 #define CONFIG_EXTRA_ENV_SETTINGS \
200         CONFIG_COMMON_ENV_SETTINGS \
201         CONFIG_ENV_RDADDR \
202         "autoboot=" \
203         "run commonargs; " \
204         "setenv bootargs ${bootargs} " \
205                 "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \
206                 "rdinit=/sbin/init; " \
207         "mmc dev ${mmcdev}; mmc rescan; " \
208         "fatload mmc ${mmcdev} ${loadaddr} uImage; " \
209         "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \
210         "bootm ${loadaddr} ${rdaddr}\0"
211
212 #else /* CONFIG_FLASHCARD */
213
214 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
215
216 #define CONFIG_ENV_IS_IN_NAND
217
218 #define CONFIG_EXTRA_ENV_SETTINGS \
219         CONFIG_COMMON_ENV_SETTINGS \
220         "mmcargs=" \
221                 "run commonargs; " \
222                 "setenv bootargs ${bootargs} " \
223                 "root=/dev/mmcblk0p2 " \
224                 "rootwait " \
225                 "rw\0" \
226         "nandargs=" \
227                 "run commonargs; " \
228                 "setenv bootargs ${bootargs} " \
229                 "root=ubi0:root " \
230                 "ubi.mtd=7 " \
231                 "rootfstype=ubifs " \
232                 "ro\0" \
233         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
234         "bootscript=echo Running bootscript from mmc ...; " \
235                 "source ${loadaddr}\0" \
236         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
237         "mmcboot=echo Booting from mmc ...; " \
238                 "run mmcargs; " \
239                 "bootm ${loadaddr}\0" \
240         "loaduimage_ubi=ubi part ubi; " \
241                 "ubifsmount ubi:root; " \
242                 "ubifsload ${loadaddr} /boot/uImage\0" \
243         "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \
244         "nandboot=echo Booting from nand ...; " \
245                 "run nandargs; " \
246                 "run loaduimage_nand; " \
247                 "bootm ${loadaddr}\0" \
248         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
249                         "if run loadbootscript; then " \
250                                 "run bootscript; " \
251                         "else " \
252                                 "if run loaduimage; then " \
253                                         "run mmcboot; " \
254                                 "else run nandboot; " \
255                                 "fi; " \
256                         "fi; " \
257                 "else run nandboot; fi\0"
258
259 #endif /* CONFIG_FLASHCARD */
260
261 /* Miscellaneous configurable options */
262 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
263 #define CONFIG_CMDLINE_EDITING          /* enable cmdline history */
264 #define CONFIG_AUTO_COMPLETE
265 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
266 /* Print Buffer Size */
267 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
268                                         sizeof(CONFIG_SYS_PROMPT) + 16)
269 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
270
271 /* Boot Argument Buffer Size */
272 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
273
274 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0 + 0x00000000)
275 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
276                                         0x07000000) /* 112 MB */
277
278 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0 + 0x02000000)
279
280 /*
281  * OMAP3 has 12 GP timers, they can be driven by the system clock
282  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
283  * This rate is divided by a local divisor.
284  */
285 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
286 #define CONFIG_SYS_PTV                  2 /* Divisor: 2^(PTV+1) => 8 */
287
288 /*  Physical Memory Map  */
289 #define CONFIG_NR_DRAM_BANKS            2 /* CS1 may or may not be populated */
290 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
291 #define PHYS_SDRAM_2                    OMAP34XX_SDRC_CS1
292
293 /* NAND and environment organization  */
294 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
295
296 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
297 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
298 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
299 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
300                                                 CONFIG_SYS_INIT_RAM_SIZE - \
301                                                 GENERATED_GBL_DATA_SIZE)
302
303 /* SRAM config */
304 #define CONFIG_SYS_SRAM_START           0x40200000
305 #define CONFIG_SYS_SRAM_SIZE            0x10000
306
307 /* Defines for SPL */
308 #define CONFIG_SPL_FRAMEWORK
309 #define CONFIG_SPL_NAND_SIMPLE
310
311 #define CONFIG_SPL_BOARD_INIT
312 #define CONFIG_SPL_NAND_BASE
313 #define CONFIG_SPL_NAND_DRIVERS
314 #define CONFIG_SPL_NAND_ECC
315 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
316 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
317 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
318
319 #define CONFIG_SPL_TEXT_BASE            0x40200000 /*CONFIG_SYS_SRAM_START*/
320 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
321                                          CONFIG_SPL_TEXT_BASE)
322
323 #define CONFIG_SPL_BSS_START_ADDR       0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
324 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
325
326 /* NAND boot config */
327 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
328 #define CONFIG_SYS_NAND_PAGE_COUNT      64
329 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
330 #define CONFIG_SYS_NAND_OOBSIZE         64
331 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
332 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
333 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
334                                          13, 14, 16, 17, 18, 19, 20, 21, 22, \
335                                          23, 24, 25, 26, 27, 28, 30, 31, 32, \
336                                          33, 34, 35, 36, 37, 38, 39, 40, 41, \
337                                          42, 44, 45, 46, 47, 48, 49, 50, 51, \
338                                          52, 53, 54, 55, 56}
339
340 #define CONFIG_SYS_NAND_ECCSIZE         512
341 #define CONFIG_SYS_NAND_ECCBYTES        13
342 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
343
344 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
345
346 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
347 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x100000
348
349 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
350 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
351
352 #define CONFIG_SYS_ALT_MEMTEST
353 #define CONFIG_SYS_MEMTEST_SCRATCH      0x81000000
354 #endif /* __CONFIG_H */