include/configs/tricorder.h

   1 /*
   2  * (C) Copyright 2006-2008
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Syed Mohammed Khasim <x0khasim@ti.com>
   6  *
   7  * (C) Copyright 2012
   8  * Corscience GmbH & Co. KG
   9  * Thomas Weber <weber@corscience.de>
  10  *
  11  * Configuration settings for the Tricorder board.
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 #ifndef __CONFIG_H
  17 #define __CONFIG_H
  18
  19 /* High Level Configuration Options */
  20 #define CONFIG_OMAP                     /* in a TI OMAP core */
  21 #define CONFIG_OMAP34XX                 /* which is a 34XX */
  22 #define CONFIG_OMAP_COMMON
  23
  24 #define CONFIG_MACH_TYPE                MACH_TYPE_TRICORDER
  25 /*
  26  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  27  * 64 bytes before this address should be set aside for u-boot.img's
  28  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  29  * other needs.
  30  */
  31 #define CONFIG_SYS_TEXT_BASE            0x80100000
  32
  33 #define CONFIG_SDRC                     /* The chip has SDRC controller */
  34
  35 #include <asm/arch/cpu.h>               /* get chip and board defs */
  36 #include <asm/arch/omap3.h>
  37
  38 /* Display CPU and Board information */
  39 #define CONFIG_DISPLAY_CPUINFO
  40 #define CONFIG_DISPLAY_BOARDINFO
  41
  42 #define CONFIG_SILENT_CONSOLE
  43 #define CONFIG_ZERO_BOOTDELAY_CHECK
  44
  45 /* Clock Defines */
  46 #define V_OSCK                          26000000 /* Clock output from T2 */
  47 #define V_SCLK                          (V_OSCK >> 1)
  48
  49 #define CONFIG_MISC_INIT_R
  50
  51 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  52 #define CONFIG_SETUP_MEMORY_TAGS
  53 #define CONFIG_INITRD_TAG
  54 #define CONFIG_REVISION_TAG
  55
  56 #define CONFIG_OF_LIBFDT
  57
  58 /* Size of malloc() pool */
  59 #define CONFIG_SYS_MALLOC_LEN           (1024*1024)
  60
  61 /* Hardware drivers */
  62
  63 /* GPIO support */
  64 #define CONFIG_OMAP_GPIO
  65
  66 /* LED support */
  67 #define CONFIG_STATUS_LED
  68 #define CONFIG_BOARD_SPECIFIC_LED
  69 #define CONFIG_CMD_LED                  /* LED command */
  70 #define STATUS_LED_BIT                  (1 << 0)
  71 #define STATUS_LED_STATE                STATUS_LED_ON
  72 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  73 #define STATUS_LED_BIT1                 (1 << 1)
  74 #define STATUS_LED_STATE1               STATUS_LED_ON
  75 #define STATUS_LED_PERIOD1              (CONFIG_SYS_HZ / 2)
  76 #define STATUS_LED_BIT2                 (1 << 2)
  77 #define STATUS_LED_STATE2               STATUS_LED_ON
  78 #define STATUS_LED_PERIOD2              (CONFIG_SYS_HZ / 2)
  79
  80 /* NS16550 Configuration */
  81 #define CONFIG_SYS_NS16550
  82 #define CONFIG_SYS_NS16550_SERIAL
  83 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  84 #define CONFIG_SYS_NS16550_CLK          48000000 /* 48MHz (APLL96/2) */
  85
  86 /* select serial console configuration */
  87 #define CONFIG_CONS_INDEX               3
  88 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  89 #define CONFIG_SERIAL3                  3
  90 #define CONFIG_BAUDRATE                 115200
  91 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  92                                         115200}
  93
  94 /* MMC */
  95 #define CONFIG_GENERIC_MMC
  96 #define CONFIG_MMC
  97 #define CONFIG_OMAP_HSMMC
  98 #define CONFIG_DOS_PARTITION
  99
 100 /* I2C */
 101 #define CONFIG_SYS_I2C
 102 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 103 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 104 #define CONFIG_SYS_I2C_OMAP34XX
 105
 106
 107 /* EEPROM */
 108 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 109 #define CONFIG_CMD_EEPROM
 110 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 111 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 112
 113 /* TWL4030 */
 114 #define CONFIG_TWL4030_POWER
 115 #define CONFIG_TWL4030_LED
 116
 117 /* Board NAND Info */
 118 #define CONFIG_SYS_NO_FLASH             /* no NOR flash */
 119 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 120 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 121 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:" \
 122                                                 "128k(SPL)," \
 123                                                 "1m(u-boot)," \
 124                                                 "384k(u-boot-env1)," \
 125                                                 "1152k(mtdoops)," \
 126                                                 "384k(u-boot-env2)," \
 127                                                 "5m(kernel)," \
 128                                                 "2m(fdt)," \
 129                                                 "-(ubi)"
 130
 131 #define CONFIG_NAND_OMAP_GPMC
 132 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 133                                                         /* to access nand */
 134 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 135                                                         /* to access nand at */
 136                                                         /* CS0 */
 137 #define GPMC_NAND_ECC_LP_x16_LAYOUT     1
 138
 139 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 140                                                         /* devices */
 141 #define CONFIG_BCH
 142 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 143 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 144
 145 /* commands to include */
 146 #include <config_cmd_default.h>
 147
 148 #define CONFIG_CMD_EXT2                 /* EXT2 Support */
 149 #define CONFIG_CMD_FAT                  /* FAT support */
 150 #define CONFIG_CMD_I2C                  /* I2C serial bus support */
 151 #define CONFIG_CMD_MMC                  /* MMC support */
 152 #define CONFIG_CMD_MTDPARTS             /* Enable MTD parts commands */
 153 #define CONFIG_CMD_NAND                 /* NAND support */
 154 #define CONFIG_CMD_NAND_LOCK_UNLOCK     /* nand (un)lock commands */
 155 #define CONFIG_CMD_UBI                  /* UBI commands */
 156 #define CONFIG_CMD_UBIFS                /* UBIFS commands */
 157 #define CONFIG_LZO                      /* LZO is needed for UBIFS */
 158
 159 #undef CONFIG_CMD_NET
 160 #undef CONFIG_CMD_NFS
 161 #undef CONFIG_CMD_FPGA                  /* FPGA configuration Support */
 162 #undef CONFIG_CMD_IMI                   /* iminfo */
 163 #undef CONFIG_CMD_JFFS2                 /* JFFS2 Support */
 164
 165 /* needed for ubi */
 166 #define CONFIG_RBTREE
 167 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 168 #define CONFIG_MTD_PARTITIONS
 169
 170 /* Environment information (this is the common part) */
 171
 172 #define CONFIG_BOOTDELAY                0
 173
 174 /* hang() the board on panic() */
 175 #define CONFIG_PANIC_HANG
 176
 177 /* environment placement (for NAND), is different for FLASHCARD but does not
 178  * harm there */
 179 #define CONFIG_ENV_OFFSET               0x120000    /* env start */
 180 #define CONFIG_ENV_OFFSET_REDUND        0x2A0000    /* redundant env start */
 181 #define CONFIG_ENV_SIZE                 (16 << 10)  /* use 16KiB for env */
 182 #define CONFIG_ENV_RANGE                (384 << 10) /* allow badblocks in env */
 183
 184 /* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend
 185  * value can not be used here! */
 186 #define CONFIG_LOADADDR         0x82000000
 187
 188 #define CONFIG_COMMON_ENV_SETTINGS \
 189         "console=ttyO2,115200n8\0" \
 190         "mmcdev=0\0" \
 191         "vram=3M\0" \
 192         "defaultdisplay=lcd\0" \
 193         "kernelopts=mtdoops.mtddev=3\0" \
 194         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 195         "mtdids=" MTDIDS_DEFAULT "\0" \
 196         "commonargs=" \
 197                 "setenv bootargs console=${console} " \
 198                 "${mtdparts} " \
 199                 "${kernelopts} " \
 200                 "vt.global_cursor_default=0 " \
 201                 "vram=${vram} " \
 202                 "omapdss.def_disp=${defaultdisplay}\0"
 203
 204 #define CONFIG_BOOTCOMMAND "run autoboot"
 205
 206 /* specific environment settings for different use cases
 207  * FLASHCARD: used to run a rdimage from sdcard to program the device
 208  * 'NORMAL': used to boot kernel from sdcard, nand, ...
 209  *
 210  * The main aim for the FLASHCARD skin is to have an embedded environment
 211  * which will not be influenced by any data already on the device.
 212  */
 213 #ifdef CONFIG_FLASHCARD
 214
 215 #define CONFIG_ENV_IS_NOWHERE
 216
 217 /* the rdaddr is 16 MiB before the loadaddr */
 218 #define CONFIG_ENV_RDADDR       "rdaddr=0x81000000\0"
 219
 220 #define CONFIG_EXTRA_ENV_SETTINGS \
 221         CONFIG_COMMON_ENV_SETTINGS \
 222         CONFIG_ENV_RDADDR \
 223         "autoboot=" \
 224         "run commonargs; " \
 225         "setenv bootargs ${bootargs} " \
 226                 "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \
 227                 "rdinit=/sbin/init; " \
 228         "mmc dev ${mmcdev}; mmc rescan; " \
 229         "fatload mmc ${mmcdev} ${loadaddr} uImage; " \
 230         "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \
 231         "bootm ${loadaddr} ${rdaddr}\0"
 232
 233 #else /* CONFIG_FLASHCARD */
 234
 235 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
 236
 237 #define CONFIG_ENV_IS_IN_NAND
 238
 239 #define CONFIG_EXTRA_ENV_SETTINGS \
 240         CONFIG_COMMON_ENV_SETTINGS \
 241         "mmcargs=" \
 242                 "run commonargs; " \
 243                 "setenv bootargs ${bootargs} " \
 244                 "root=/dev/mmcblk0p2 " \
 245                 "rootwait " \
 246                 "rw\0" \
 247         "nandargs=" \
 248                 "run commonargs; " \
 249                 "setenv bootargs ${bootargs} " \
 250                 "root=ubi0:root " \
 251                 "ubi.mtd=7 " \
 252                 "rootfstype=ubifs " \
 253                 "ro\0" \
 254         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 255         "bootscript=echo Running bootscript from mmc ...; " \
 256                 "source ${loadaddr}\0" \
 257         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 258         "mmcboot=echo Booting from mmc ...; " \
 259                 "run mmcargs; " \
 260                 "bootm ${loadaddr}\0" \
 261         "loaduimage_ubi=ubi part ubi; " \
 262                 "ubifsmount ubi:root; " \
 263                 "ubifsload ${loadaddr} /boot/uImage\0" \
 264         "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \
 265         "nandboot=echo Booting from nand ...; " \
 266                 "run nandargs; " \
 267                 "run loaduimage_nand; " \
 268                 "bootm ${loadaddr}\0" \
 269         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 270                         "if run loadbootscript; then " \
 271                                 "run bootscript; " \
 272                         "else " \
 273                                 "if run loaduimage; then " \
 274                                         "run mmcboot; " \
 275                                 "else run nandboot; " \
 276                                 "fi; " \
 277                         "fi; " \
 278                 "else run nandboot; fi\0"
 279
 280 #endif /* CONFIG_FLASHCARD */
 281
 282 /* Miscellaneous configurable options */
 283 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 284 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 285 #define CONFIG_CMDLINE_EDITING          /* enable cmdline history */
 286 #define CONFIG_AUTO_COMPLETE
 287 #define CONFIG_SYS_PROMPT               "OMAP3 Tricorder # "
 288 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 289 /* Print Buffer Size */
 290 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 291                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 292 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 293
 294 /* Boot Argument Buffer Size */
 295 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 296
 297 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0 + 0x00000000)
 298 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
 299                                         0x07000000) /* 112 MB */
 300
 301 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0 + 0x02000000)
 302
 303 /*
 304  * OMAP3 has 12 GP timers, they can be driven by the system clock
 305  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 306  * This rate is divided by a local divisor.
 307  */
 308 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 309 #define CONFIG_SYS_PTV                  2 /* Divisor: 2^(PTV+1) => 8 */
 310
 311 /*  Physical Memory Map  */
 312 #define CONFIG_NR_DRAM_BANKS            2 /* CS1 may or may not be populated */
 313 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 314 #define PHYS_SDRAM_2                    OMAP34XX_SDRC_CS1
 315
 316 /* NAND and environment organization  */
 317 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
 318
 319 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 320
 321 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 322 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 323 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 324 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
 325                                                 CONFIG_SYS_INIT_RAM_SIZE - \
 326                                                 GENERATED_GBL_DATA_SIZE)
 327
 328 /* SRAM config */
 329 #define CONFIG_SYS_SRAM_START           0x40200000
 330 #define CONFIG_SYS_SRAM_SIZE            0x10000
 331
 332 /* Defines for SPL */
 333 #define CONFIG_SPL
 334 #define CONFIG_SPL_FRAMEWORK
 335 #define CONFIG_SPL_NAND_SIMPLE
 336
 337 #define CONFIG_SPL_BOARD_INIT
 338 #define CONFIG_SPL_GPIO_SUPPORT
 339 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 340 #define CONFIG_SPL_LIBDISK_SUPPORT
 341 #define CONFIG_SPL_I2C_SUPPORT
 342 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 343 #define CONFIG_SPL_SERIAL_SUPPORT
 344 #define CONFIG_SPL_POWER_SUPPORT
 345 #define CONFIG_SPL_NAND_SUPPORT
 346 #define CONFIG_SPL_NAND_BASE
 347 #define CONFIG_SPL_NAND_DRIVERS
 348 #define CONFIG_SPL_NAND_ECC
 349 #define CONFIG_SPL_MMC_SUPPORT
 350 #define CONFIG_SPL_FAT_SUPPORT
 351 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 352 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
 353 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
 354 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 355
 356 #define CONFIG_SPL_TEXT_BASE            0x40200000 /*CONFIG_SYS_SRAM_START*/
 357 #define CONFIG_SPL_MAX_SIZE             (57 * 1024)     /* 7 KB for stack */
 358 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 359
 360 #define CONFIG_SPL_BSS_START_ADDR       0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
 361 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 362
 363 /* NAND boot config */
 364 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 365 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 366 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 367 #define CONFIG_SYS_NAND_OOBSIZE         64
 368 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 369 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 370 #define CONFIG_SYS_NAND_ECCPOS          {12, 13, 14, 15, 16, 17, 18, 19, 20,\
 371                         21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
 372                         34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
 373                         47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
 374                         60, 61, 62, 63}
 375
 376 #define CONFIG_SYS_NAND_ECCSIZE         512
 377 #define CONFIG_SYS_NAND_ECCBYTES        13
 378 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 379
 380 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 381
 382 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 383 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x100000
 384
 385 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 386 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
 387
 388 #define CONFIG_SYS_ALT_MEMTEST
 389 #define CONFIG_SYS_MEMTEST_SCRATCH      0x81000000
 390 #endif /* __CONFIG_H */