include/configs/tricorder.h

   1 /*
   2  * (C) Copyright 2006-2008
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Syed Mohammed Khasim <x0khasim@ti.com>
   6  *
   7  * (C) Copyright 2012
   8  * Corscience GmbH & Co. KG
   9  * Thomas Weber <weber@corscience.de>
  10  *
  11  * Configuration settings for the Tricorder board.
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 #ifndef __CONFIG_H
  17 #define __CONFIG_H
  18
  19 /* High Level Configuration Options */
  20 #define CONFIG_OMAP                     /* in a TI OMAP core */
  21 #define CONFIG_OMAP34XX                 /* which is a 34XX */
  22 #define CONFIG_OMAP_COMMON
  23
  24 #define CONFIG_MACH_TYPE                MACH_TYPE_TRICORDER
  25 /*
  26  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  27  * 64 bytes before this address should be set aside for u-boot.img's
  28  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  29  * other needs.
  30  */
  31 #define CONFIG_SYS_TEXT_BASE            0x80100000
  32
  33 #define CONFIG_SDRC                     /* The chip has SDRC controller */
  34
  35 #include <asm/arch/cpu.h>               /* get chip and board defs */
  36 #include <asm/arch/omap3.h>
  37
  38 /* Display CPU and Board information */
  39 #define CONFIG_DISPLAY_CPUINFO
  40 #define CONFIG_DISPLAY_BOARDINFO
  41
  42 #define CONFIG_SILENT_CONSOLE
  43 #define CONFIG_ZERO_BOOTDELAY_CHECK
  44
  45 /* Clock Defines */
  46 #define V_OSCK                          26000000 /* Clock output from T2 */
  47 #define V_SCLK                          (V_OSCK >> 1)
  48
  49 #define CONFIG_MISC_INIT_R
  50
  51 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  52 #define CONFIG_SETUP_MEMORY_TAGS
  53 #define CONFIG_INITRD_TAG
  54 #define CONFIG_REVISION_TAG
  55
  56 #define CONFIG_OF_LIBFDT
  57
  58 /* Size of malloc() pool */
  59 #define CONFIG_SYS_MALLOC_LEN           (1024*1024)
  60
  61 /* Hardware drivers */
  62
  63 /* GPIO support */
  64 #define CONFIG_OMAP_GPIO
  65
  66 /* LED support */
  67 #define CONFIG_STATUS_LED
  68 #define CONFIG_BOARD_SPECIFIC_LED
  69 #define CONFIG_CMD_LED                  /* LED command */
  70 #define STATUS_LED_BIT                  (1 << 0)
  71 #define STATUS_LED_STATE                STATUS_LED_ON
  72 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  73 #define STATUS_LED_BIT1                 (1 << 1)
  74 #define STATUS_LED_STATE1               STATUS_LED_ON
  75 #define STATUS_LED_PERIOD1              (CONFIG_SYS_HZ / 2)
  76 #define STATUS_LED_BIT2                 (1 << 2)
  77 #define STATUS_LED_STATE2               STATUS_LED_ON
  78 #define STATUS_LED_PERIOD2              (CONFIG_SYS_HZ / 2)
  79
  80 /* NS16550 Configuration */
  81 #define CONFIG_SYS_NS16550
  82 #define CONFIG_SYS_NS16550_SERIAL
  83 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  84 #define CONFIG_SYS_NS16550_CLK          48000000 /* 48MHz (APLL96/2) */
  85
  86 /* select serial console configuration */
  87 #define CONFIG_CONS_INDEX               3
  88 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  89 #define CONFIG_SERIAL3                  3
  90 #define CONFIG_BAUDRATE                 115200
  91 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  92                                         115200}
  93
  94 /* MMC */
  95 #define CONFIG_GENERIC_MMC
  96 #define CONFIG_MMC
  97 #define CONFIG_OMAP_HSMMC
  98 #define CONFIG_DOS_PARTITION
  99
 100 /* I2C */
 101 #define CONFIG_SYS_I2C
 102 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 103 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 104 #define CONFIG_SYS_I2C_OMAP34XX
 105
 106
 107 /* EEPROM */
 108 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 109 #define CONFIG_CMD_EEPROM
 110 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 111 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 112
 113 /* TWL4030 */
 114 #define CONFIG_TWL4030_POWER
 115 #define CONFIG_TWL4030_LED
 116
 117 /* Board NAND Info */
 118 #define CONFIG_SYS_NO_FLASH             /* no NOR flash */
 119 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 120 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 121 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:" \
 122                                                 "128k(SPL)," \
 123                                                 "1m(u-boot)," \
 124                                                 "384k(u-boot-env1)," \
 125                                                 "1152k(mtdoops)," \
 126                                                 "384k(u-boot-env2)," \
 127                                                 "5m(kernel)," \
 128                                                 "2m(fdt)," \
 129                                                 "-(ubi)"
 130
 131 #define CONFIG_NAND_OMAP_GPMC
 132 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 133                                                         /* to access nand */
 134 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 135                                                         /* to access nand at */
 136                                                         /* CS0 */
 137 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 138                                                         /* devices */
 139 #define CONFIG_BCH
 140 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 141 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 142
 143 /* commands to include */
 144 #include <config_cmd_default.h>
 145
 146 #define CONFIG_CMD_EXT2                 /* EXT2 Support */
 147 #define CONFIG_CMD_FAT                  /* FAT support */
 148 #define CONFIG_CMD_I2C                  /* I2C serial bus support */
 149 #define CONFIG_CMD_MMC                  /* MMC support */
 150 #define CONFIG_CMD_MTDPARTS             /* Enable MTD parts commands */
 151 #define CONFIG_CMD_NAND                 /* NAND support */
 152 #define CONFIG_CMD_NAND_LOCK_UNLOCK     /* nand (un)lock commands */
 153 #define CONFIG_CMD_UBI                  /* UBI commands */
 154 #define CONFIG_CMD_UBIFS                /* UBIFS commands */
 155 #define CONFIG_LZO                      /* LZO is needed for UBIFS */
 156
 157 #undef CONFIG_CMD_NET
 158 #undef CONFIG_CMD_NFS
 159 #undef CONFIG_CMD_FPGA                  /* FPGA configuration Support */
 160 #undef CONFIG_CMD_IMI                   /* iminfo */
 161 #undef CONFIG_CMD_JFFS2                 /* JFFS2 Support */
 162
 163 /* needed for ubi */
 164 #define CONFIG_RBTREE
 165 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 166 #define CONFIG_MTD_PARTITIONS
 167
 168 /* Environment information (this is the common part) */
 169
 170 #define CONFIG_BOOTDELAY                0
 171
 172 /* hang() the board on panic() */
 173 #define CONFIG_PANIC_HANG
 174
 175 /* environment placement (for NAND), is different for FLASHCARD but does not
 176  * harm there */
 177 #define CONFIG_ENV_OFFSET               0x120000    /* env start */
 178 #define CONFIG_ENV_OFFSET_REDUND        0x2A0000    /* redundant env start */
 179 #define CONFIG_ENV_SIZE                 (16 << 10)  /* use 16KiB for env */
 180 #define CONFIG_ENV_RANGE                (384 << 10) /* allow badblocks in env */
 181
 182 /* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend
 183  * value can not be used here! */
 184 #define CONFIG_LOADADDR         0x82000000
 185
 186 #define CONFIG_COMMON_ENV_SETTINGS \
 187         "console=ttyO2,115200n8\0" \
 188         "mmcdev=0\0" \
 189         "vram=3M\0" \
 190         "defaultdisplay=lcd\0" \
 191         "kernelopts=mtdoops.mtddev=3\0" \
 192         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 193         "mtdids=" MTDIDS_DEFAULT "\0" \
 194         "commonargs=" \
 195                 "setenv bootargs console=${console} " \
 196                 "${mtdparts} " \
 197                 "${kernelopts} " \
 198                 "vt.global_cursor_default=0 " \
 199                 "vram=${vram} " \
 200                 "omapdss.def_disp=${defaultdisplay}\0"
 201
 202 #define CONFIG_BOOTCOMMAND "run autoboot"
 203
 204 /* specific environment settings for different use cases
 205  * FLASHCARD: used to run a rdimage from sdcard to program the device
 206  * 'NORMAL': used to boot kernel from sdcard, nand, ...
 207  *
 208  * The main aim for the FLASHCARD skin is to have an embedded environment
 209  * which will not be influenced by any data already on the device.
 210  */
 211 #ifdef CONFIG_FLASHCARD
 212
 213 #define CONFIG_ENV_IS_NOWHERE
 214
 215 /* the rdaddr is 16 MiB before the loadaddr */
 216 #define CONFIG_ENV_RDADDR       "rdaddr=0x81000000\0"
 217
 218 #define CONFIG_EXTRA_ENV_SETTINGS \
 219         CONFIG_COMMON_ENV_SETTINGS \
 220         CONFIG_ENV_RDADDR \
 221         "autoboot=" \
 222         "run commonargs; " \
 223         "setenv bootargs ${bootargs} " \
 224                 "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \
 225                 "rdinit=/sbin/init; " \
 226         "mmc dev ${mmcdev}; mmc rescan; " \
 227         "fatload mmc ${mmcdev} ${loadaddr} uImage; " \
 228         "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \
 229         "bootm ${loadaddr} ${rdaddr}\0"
 230
 231 #else /* CONFIG_FLASHCARD */
 232
 233 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
 234
 235 #define CONFIG_ENV_IS_IN_NAND
 236
 237 #define CONFIG_EXTRA_ENV_SETTINGS \
 238         CONFIG_COMMON_ENV_SETTINGS \
 239         "mmcargs=" \
 240                 "run commonargs; " \
 241                 "setenv bootargs ${bootargs} " \
 242                 "root=/dev/mmcblk0p2 " \
 243                 "rootwait " \
 244                 "rw\0" \
 245         "nandargs=" \
 246                 "run commonargs; " \
 247                 "setenv bootargs ${bootargs} " \
 248                 "root=ubi0:root " \
 249                 "ubi.mtd=7 " \
 250                 "rootfstype=ubifs " \
 251                 "ro\0" \
 252         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 253         "bootscript=echo Running bootscript from mmc ...; " \
 254                 "source ${loadaddr}\0" \
 255         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 256         "mmcboot=echo Booting from mmc ...; " \
 257                 "run mmcargs; " \
 258                 "bootm ${loadaddr}\0" \
 259         "loaduimage_ubi=ubi part ubi; " \
 260                 "ubifsmount ubi:root; " \
 261                 "ubifsload ${loadaddr} /boot/uImage\0" \
 262         "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \
 263         "nandboot=echo Booting from nand ...; " \
 264                 "run nandargs; " \
 265                 "run loaduimage_nand; " \
 266                 "bootm ${loadaddr}\0" \
 267         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 268                         "if run loadbootscript; then " \
 269                                 "run bootscript; " \
 270                         "else " \
 271                                 "if run loaduimage; then " \
 272                                         "run mmcboot; " \
 273                                 "else run nandboot; " \
 274                                 "fi; " \
 275                         "fi; " \
 276                 "else run nandboot; fi\0"
 277
 278 #endif /* CONFIG_FLASHCARD */
 279
 280 /* Miscellaneous configurable options */
 281 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 282 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 283 #define CONFIG_CMDLINE_EDITING          /* enable cmdline history */
 284 #define CONFIG_AUTO_COMPLETE
 285 #define CONFIG_SYS_PROMPT               "OMAP3 Tricorder # "
 286 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 287 /* Print Buffer Size */
 288 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 289                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 290 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 291
 292 /* Boot Argument Buffer Size */
 293 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 294
 295 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0 + 0x00000000)
 296 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
 297                                         0x07000000) /* 112 MB */
 298
 299 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0 + 0x02000000)
 300
 301 /*
 302  * OMAP3 has 12 GP timers, they can be driven by the system clock
 303  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 304  * This rate is divided by a local divisor.
 305  */
 306 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 307 #define CONFIG_SYS_PTV                  2 /* Divisor: 2^(PTV+1) => 8 */
 308
 309 /*  Physical Memory Map  */
 310 #define CONFIG_NR_DRAM_BANKS            2 /* CS1 may or may not be populated */
 311 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 312 #define PHYS_SDRAM_2                    OMAP34XX_SDRC_CS1
 313
 314 /* NAND and environment organization  */
 315 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
 316
 317 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 318
 319 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 320 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 321 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 322 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
 323                                                 CONFIG_SYS_INIT_RAM_SIZE - \
 324                                                 GENERATED_GBL_DATA_SIZE)
 325
 326 /* SRAM config */
 327 #define CONFIG_SYS_SRAM_START           0x40200000
 328 #define CONFIG_SYS_SRAM_SIZE            0x10000
 329
 330 /* Defines for SPL */
 331 #define CONFIG_SPL
 332 #define CONFIG_SPL_FRAMEWORK
 333 #define CONFIG_SPL_NAND_SIMPLE
 334
 335 #define CONFIG_SPL_BOARD_INIT
 336 #define CONFIG_SPL_GPIO_SUPPORT
 337 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 338 #define CONFIG_SPL_LIBDISK_SUPPORT
 339 #define CONFIG_SPL_I2C_SUPPORT
 340 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 341 #define CONFIG_SPL_SERIAL_SUPPORT
 342 #define CONFIG_SPL_POWER_SUPPORT
 343 #define CONFIG_SPL_NAND_SUPPORT
 344 #define CONFIG_SPL_NAND_BASE
 345 #define CONFIG_SPL_NAND_DRIVERS
 346 #define CONFIG_SPL_NAND_ECC
 347 #define CONFIG_SPL_MMC_SUPPORT
 348 #define CONFIG_SPL_FAT_SUPPORT
 349 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 350 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
 351 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
 352 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 353
 354 #define CONFIG_SPL_TEXT_BASE            0x40200000 /*CONFIG_SYS_SRAM_START*/
 355 #define CONFIG_SPL_MAX_SIZE             (57 * 1024)     /* 7 KB for stack */
 356 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 357
 358 #define CONFIG_SPL_BSS_START_ADDR       0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
 359 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 360
 361 /* NAND boot config */
 362 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 363 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 364 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 365 #define CONFIG_SYS_NAND_OOBSIZE         64
 366 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 367 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 368 #define CONFIG_SYS_NAND_ECCPOS          {12, 13, 14, 15, 16, 17, 18, 19, 20,\
 369                         21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
 370                         34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
 371                         47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
 372                         60, 61, 62, 63}
 373
 374 #define CONFIG_SYS_NAND_ECCSIZE         512
 375 #define CONFIG_SYS_NAND_ECCBYTES        13
 376 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 377
 378 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 379
 380 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 381 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x100000
 382
 383 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 384 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
 385
 386 #define CONFIG_SYS_ALT_MEMTEST
 387 #define CONFIG_SYS_MEMTEST_SCRATCH      0x81000000
 388 #endif /* __CONFIG_H */