configs: Migrate CONFIG_NR_DRAM_BANKS
[platform/kernel/u-boot.git] / include / configs / trats2.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2013 Samsung Electronics
4  * Sanghee Kim <sh0130.kim@samsung.com>
5  * Piotr Wilczek <p.wilczek@samsung.com>
6  *
7  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
8  */
9
10 #ifndef __CONFIG_TRATS2_H
11 #define __CONFIG_TRATS2_H
12
13 #include <configs/exynos4-common.h>
14
15 #define CONFIG_TIZEN                    /* TIZEN lib */
16
17 #define CONFIG_SYS_L2CACHE_OFF
18 #ifndef CONFIG_SYS_L2CACHE_OFF
19 #define CONFIG_SYS_L2_PL310
20 #define CONFIG_SYS_PL310_BASE   0x10502000
21 #endif
22
23 /* TRATS2 has 4 banks of DRAM */
24 #define CONFIG_SYS_SDRAM_BASE           0x40000000
25 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
26 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
27 /* memtest works on */
28 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
29 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
30 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
31
32 /* select serial console configuration */
33 #define CONFIG_SERIAL2
34
35 /* Console configuration */
36
37 #define CONFIG_BOOTCOMMAND              "run autoboot"
38 #define CONFIG_DEFAULT_CONSOLE          "ttySAC2,115200n8"
39
40 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
41                                         - GENERATED_GBL_DATA_SIZE)
42
43 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
44
45 #define CONFIG_SYS_MONITOR_BASE 0x00000000
46
47 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
48 #define CONFIG_ENV_SIZE                 4096
49 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
50
51 #define CONFIG_ENV_OVERWRITE
52
53 /* Tizen - partitions definitions */
54 #define PARTS_CSA               "csa-mmc"
55 #define PARTS_BOOT              "boot"
56 #define PARTS_QBOOT             "qboot"
57 #define PARTS_CSC               "csc"
58 #define PARTS_ROOT              "platform"
59 #define PARTS_DATA              "data"
60 #define PARTS_UMS               "ums"
61
62 #define PARTS_DEFAULT \
63         "uuid_disk=${uuid_gpt_disk};" \
64         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
65         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
66         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
67         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
68         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
69         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
70         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
71
72 #define CONFIG_DFU_ALT \
73         "u-boot raw 0x80 0x800;" \
74         "/uImage ext4 0 2;" \
75         "/modem.bin ext4 0 2;" \
76         "/exynos4412-trats2.dtb ext4 0 2;" \
77         ""PARTS_CSA" part 0 1;" \
78         ""PARTS_BOOT" part 0 2;" \
79         ""PARTS_QBOOT" part 0 3;" \
80         ""PARTS_CSC" part 0 4;" \
81         ""PARTS_ROOT" part 0 5;" \
82         ""PARTS_DATA" part 0 6;" \
83         ""PARTS_UMS" part 0 7;" \
84         "params.bin raw 0x38 0x8;" \
85         "/Image.itb ext4 0 2\0"
86
87 #define CONFIG_EXTRA_ENV_SETTINGS \
88         "bootk=" \
89                 "run loaduimage;" \
90                 "if run loaddtb; then " \
91                         "bootm 0x40007FC0 - ${fdtaddr};" \
92                 "fi;" \
93                 "bootm 0x40007FC0;\0" \
94         "updatebackup=" \
95                 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
96                 " mmc dev 0 0\0" \
97         "updatebootb=" \
98                 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
99         "mmcboot=" \
100                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
101                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
102                 "run bootk\0" \
103         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
104         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
105         "verify=n\0" \
106         "rootfstype=ext4\0" \
107         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
108         "kernelname=uImage\0" \
109         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
110                 "${kernelname}\0" \
111         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
112                 "${fdtfile}\0" \
113         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
114         "mmcbootpart=2\0" \
115         "mmcrootpart=5\0" \
116         "opts=always_resume=1\0" \
117         "partitions=" PARTS_DEFAULT \
118         "dfu_alt_info=" CONFIG_DFU_ALT \
119         "uartpath=ap\0" \
120         "usbpath=ap\0" \
121         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
122         "consoleoff=set console console=ram; save; reset\0" \
123         "spladdr=0x40000100\0" \
124         "splsize=0x200\0" \
125         "splfile=falcon.bin\0" \
126         "spl_export=" \
127                    "setexpr spl_imgsize ${splsize} + 8 ;" \
128                    "setenv spl_imgsize 0x${spl_imgsize};" \
129                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
130                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
131                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
132                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
133                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
134                    "spl export atags 0x40007FC0;" \
135                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
136                    "mw.l ${spl_addr_tmp} ${splsize};" \
137                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
138                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
139                    "setenv spl_imgsize;" \
140                    "setenv spl_imgaddr;" \
141                    "setenv spl_addr_tmp;\0" \
142         CONFIG_EXTRA_ENV_ITB \
143         "fdtaddr=40800000\0" \
144
145 /* GPT */
146
147 /* Security subsystem - enable hw_rand() */
148 #define CONFIG_EXYNOS_ACE_SHA
149
150 /* Common misc for Samsung */
151 #define CONFIG_MISC_COMMON
152
153 #define CONFIG_MISC_INIT_R
154
155 /* Download menu - Samsung common */
156 #define CONFIG_LCD_MENU
157
158 /* Download menu - definitions for check keys */
159 #ifndef __ASSEMBLY__
160
161 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
162 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
163 #define KEY_PWR_STATUS_MASK             (1 << 0)
164 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
165 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
166
167 #define KEY_VOL_UP_GPIO                 EXYNOS4X12_GPIO_X22
168 #define KEY_VOL_DOWN_GPIO               EXYNOS4X12_GPIO_X33
169 #endif /* __ASSEMBLY__ */
170
171 /* LCD console */
172 #define LCD_BPP                 LCD_COLOR16
173
174 /* LCD */
175 #define CONFIG_BMP_16BPP
176 #define CONFIG_FB_ADDR          0x52504000
177 #define CONFIG_EXYNOS_MIPI_DSIM
178 #define CONFIG_VIDEO_BMP_GZIP
179 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
180
181 #endif  /* __CONFIG_H */