stm32f7: sdram: correct sdram configuration as per micron sdram
[platform/kernel/u-boot.git] / include / configs / trats2.h
1 /*
2  * Copyright (C) 2013 Samsung Electronics
3  * Sanghee Kim <sh0130.kim@samsung.com>
4  * Piotr Wilczek <p.wilczek@samsung.com>
5  *
6  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_TRATS2_H
12 #define __CONFIG_TRATS2_H
13
14 #include <configs/exynos4-common.h>
15
16 #define CONFIG_TIZEN                    /* TIZEN lib */
17
18 #define CONFIG_SYS_L2CACHE_OFF
19 #ifndef CONFIG_SYS_L2CACHE_OFF
20 #define CONFIG_SYS_L2_PL310
21 #define CONFIG_SYS_PL310_BASE   0x10502000
22 #endif
23
24 /* TRATS2 has 4 banks of DRAM */
25 #define CONFIG_NR_DRAM_BANKS            4
26 #define CONFIG_SYS_SDRAM_BASE           0x40000000
27 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
28 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
29 /* memtest works on */
30 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
31 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
32 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
33
34 #define CONFIG_SYS_TEXT_BASE            0x43e00000
35
36 /* select serial console configuration */
37 #define CONFIG_SERIAL2
38
39 /* Console configuration */
40
41 #define CONFIG_BOOTARGS                 "Please use defined boot"
42 #define CONFIG_BOOTCOMMAND              "run autoboot"
43 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC2,115200n8\0"
44
45 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
46                                         - GENERATED_GBL_DATA_SIZE)
47
48 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
49
50 #define CONFIG_SYS_MONITOR_BASE 0x00000000
51
52 #define CONFIG_ENV_IS_IN_MMC
53 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
54 #define CONFIG_ENV_SIZE                 4096
55 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
56
57 #define CONFIG_ENV_OVERWRITE
58
59 #define CONFIG_ENV_VARS_UBOOT_CONFIG
60 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
61
62 /* Tizen - partitions definitions */
63 #define PARTS_CSA               "csa-mmc"
64 #define PARTS_BOOT              "boot"
65 #define PARTS_QBOOT             "qboot"
66 #define PARTS_CSC               "csc"
67 #define PARTS_ROOT              "platform"
68 #define PARTS_DATA              "data"
69 #define PARTS_UMS               "ums"
70
71 #define PARTS_DEFAULT \
72         "uuid_disk=${uuid_gpt_disk};" \
73         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
74         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
75         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
76         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
77         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
78         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
79         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
80
81 #define CONFIG_DFU_ALT \
82         "u-boot raw 0x80 0x800;" \
83         "/uImage ext4 0 2;" \
84         "/modem.bin ext4 0 2;" \
85         "/exynos4412-trats2.dtb ext4 0 2;" \
86         ""PARTS_CSA" part 0 1;" \
87         ""PARTS_BOOT" part 0 2;" \
88         ""PARTS_QBOOT" part 0 3;" \
89         ""PARTS_CSC" part 0 4;" \
90         ""PARTS_ROOT" part 0 5;" \
91         ""PARTS_DATA" part 0 6;" \
92         ""PARTS_UMS" part 0 7;" \
93         "params.bin raw 0x38 0x8;" \
94         "/Image.itb ext4 0 2\0"
95
96 #define CONFIG_EXTRA_ENV_SETTINGS \
97         "bootk=" \
98                 "run loaduimage;" \
99                 "if run loaddtb; then " \
100                         "bootm 0x40007FC0 - ${fdtaddr};" \
101                 "fi;" \
102                 "bootm 0x40007FC0;\0" \
103         "updatebackup=" \
104                 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
105                 " mmc dev 0 0\0" \
106         "updatebootb=" \
107                 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
108         "mmcboot=" \
109                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
110                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
111                 "run bootk\0" \
112         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
113         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
114         "verify=n\0" \
115         "rootfstype=ext4\0" \
116         "console=" CONFIG_DEFAULT_CONSOLE \
117         "kernelname=uImage\0" \
118         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
119                 "${kernelname}\0" \
120         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
121                 "${fdtfile}\0" \
122         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
123         "mmcbootpart=2\0" \
124         "mmcrootpart=5\0" \
125         "opts=always_resume=1\0" \
126         "partitions=" PARTS_DEFAULT \
127         "dfu_alt_info=" CONFIG_DFU_ALT \
128         "uartpath=ap\0" \
129         "usbpath=ap\0" \
130         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
131         "consoleoff=set console console=ram; save; reset\0" \
132         "spladdr=0x40000100\0" \
133         "splsize=0x200\0" \
134         "splfile=falcon.bin\0" \
135         "spl_export=" \
136                    "setexpr spl_imgsize ${splsize} + 8 ;" \
137                    "setenv spl_imgsize 0x${spl_imgsize};" \
138                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
139                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
140                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
141                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
142                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
143                    "spl export atags 0x40007FC0;" \
144                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
145                    "mw.l ${spl_addr_tmp} ${splsize};" \
146                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
147                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
148                    "setenv spl_imgsize;" \
149                    "setenv spl_imgaddr;" \
150                    "setenv spl_addr_tmp;\0" \
151         CONFIG_EXTRA_ENV_ITB \
152         "fdtaddr=40800000\0" \
153
154 /* GPT */
155 #define CONFIG_RANDOM_UUID
156
157 /* Security subsystem - enable hw_rand() */
158 #define CONFIG_EXYNOS_ACE_SHA
159 #define CONFIG_LIB_HW_RAND
160
161 /* Common misc for Samsung */
162 #define CONFIG_MISC_COMMON
163
164 #define CONFIG_MISC_INIT_R
165
166 /* Download menu - Samsung common */
167 #define CONFIG_LCD_MENU
168 #define CONFIG_LCD_MENU_BOARD
169
170 /* Download menu - definitions for check keys */
171 #ifndef __ASSEMBLY__
172 #include <power/max77686_pmic.h>
173
174 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
175 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
176 #define KEY_PWR_STATUS_MASK             (1 << 0)
177 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
178 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
179
180 #define KEY_VOL_UP_GPIO                 EXYNOS4X12_GPIO_X22
181 #define KEY_VOL_DOWN_GPIO               EXYNOS4X12_GPIO_X33
182 #endif /* __ASSEMBLY__ */
183
184 /* LCD console */
185 #define LCD_BPP                 LCD_COLOR16
186
187 /* LCD */
188 #define CONFIG_BMP_16BPP
189 #define CONFIG_FB_ADDR          0x52504000
190 #define CONFIG_EXYNOS_MIPI_DSIM
191 #define CONFIG_VIDEO_BMP_GZIP
192 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
193
194 #endif  /* __CONFIG_H */