include/configs/trats2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Samsung Electronics
   4  * Sanghee Kim <sh0130.kim@samsung.com>
   5  * Piotr Wilczek <p.wilczek@samsung.com>
   6  *
   7  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
   8  */
   9
  10 #ifndef __CONFIG_TRATS2_H
  11 #define __CONFIG_TRATS2_H
  12
  13 #include <configs/exynos4-common.h>
  14
  15 #define CONFIG_TIZEN                    /* TIZEN lib */
  16
  17 #define CONFIG_SYS_L2CACHE_OFF
  18 #ifndef CONFIG_SYS_L2CACHE_OFF
  19 #define CONFIG_SYS_L2_PL310
  20 #define CONFIG_SYS_PL310_BASE   0x10502000
  21 #endif
  22
  23 /* TRATS2 has 4 banks of DRAM */
  24 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  25 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  26 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  27 /* memtest works on */
  28 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  29
  30 #define CONFIG_BOOTCOMMAND              "run autoboot"
  31
  32 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  33                                         - GENERATED_GBL_DATA_SIZE)
  34
  35 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  36
  37 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  38
  39 /* Tizen - partitions definitions */
  40 #define PARTS_CSA               "csa-mmc"
  41 #define PARTS_BOOT              "boot"
  42 #define PARTS_QBOOT             "qboot"
  43 #define PARTS_CSC               "csc"
  44 #define PARTS_ROOT              "platform"
  45 #define PARTS_DATA              "data"
  46 #define PARTS_UMS               "ums"
  47
  48 #define PARTS_DEFAULT \
  49         "uuid_disk=${uuid_gpt_disk};" \
  50         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  51         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  52         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  53         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  54         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  55         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  56         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  57
  58 #define CONFIG_DFU_ALT \
  59         "u-boot raw 0x80 0x800;" \
  60         "/uImage ext4 0 2;" \
  61         "/modem.bin ext4 0 2;" \
  62         "/exynos4412-trats2.dtb ext4 0 2;" \
  63         ""PARTS_CSA" part 0 1;" \
  64         ""PARTS_BOOT" part 0 2;" \
  65         ""PARTS_QBOOT" part 0 3;" \
  66         ""PARTS_CSC" part 0 4;" \
  67         ""PARTS_ROOT" part 0 5;" \
  68         ""PARTS_DATA" part 0 6;" \
  69         ""PARTS_UMS" part 0 7;" \
  70         "params.bin raw 0x38 0x8;" \
  71         "/Image.itb ext4 0 2\0"
  72
  73 #define CONFIG_EXTRA_ENV_SETTINGS \
  74         "bootk=" \
  75                 "run loaduimage;" \
  76                 "if run loaddtb; then " \
  77                         "bootm 0x40007FC0 - ${fdtaddr};" \
  78                 "fi;" \
  79                 "bootm 0x40007FC0;\0" \
  80         "updatebackup=" \
  81                 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
  82                 " mmc dev 0 0\0" \
  83         "updatebootb=" \
  84                 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
  85         "mmcboot=" \
  86                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
  87                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
  88                 "run bootk\0" \
  89         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
  90         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
  91         "verify=n\0" \
  92         "rootfstype=ext4\0" \
  93         "console=console=ttySAC2,115200n8\0" \
  94         "kernelname=uImage\0" \
  95         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
  96                 "${kernelname}\0" \
  97         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
  98                 "${fdtfile}\0" \
  99         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 100         "mmcbootpart=2\0" \
 101         "mmcrootpart=5\0" \
 102         "opts=always_resume=1\0" \
 103         "partitions=" PARTS_DEFAULT \
 104         "dfu_alt_info=" CONFIG_DFU_ALT \
 105         "uartpath=ap\0" \
 106         "usbpath=ap\0" \
 107         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 108         "consoleoff=set console console=ram; save; reset\0" \
 109         "spladdr=0x40000100\0" \
 110         "splsize=0x200\0" \
 111         "splfile=falcon.bin\0" \
 112         "spl_export=" \
 113                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 114                    "setenv spl_imgsize 0x${spl_imgsize};" \
 115                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 116                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 117                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 118                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 119                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 120                    "spl export atags 0x40007FC0;" \
 121                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 122                    "mw.l ${spl_addr_tmp} ${splsize};" \
 123                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 124                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 125                    "setenv spl_imgsize;" \
 126                    "setenv spl_imgaddr;" \
 127                    "setenv spl_addr_tmp;\0" \
 128         CONFIG_EXTRA_ENV_ITB \
 129         "fdtaddr=40800000\0" \
 130
 131 /* GPT */
 132
 133 /* Security subsystem - enable hw_rand() */
 134 #define CONFIG_EXYNOS_ACE_SHA
 135
 136 /* Common misc for Samsung */
 137 #define CONFIG_MISC_COMMON
 138
 139 /* Download menu - Samsung common */
 140 #define CONFIG_LCD_MENU
 141
 142 /* Download menu - definitions for check keys */
 143 #ifndef __ASSEMBLY__
 144
 145 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
 146 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
 147 #define KEY_PWR_STATUS_MASK             (1 << 0)
 148 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
 149 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
 150
 151 #define KEY_VOL_UP_GPIO                 EXYNOS4X12_GPIO_X22
 152 #define KEY_VOL_DOWN_GPIO               EXYNOS4X12_GPIO_X33
 153 #endif /* __ASSEMBLY__ */
 154
 155 /* LCD console */
 156 #define LCD_BPP                 LCD_COLOR16
 157
 158 /* LCD */
 159 #define CONFIG_FB_ADDR          0x52504000
 160 #define CONFIG_EXYNOS_MIPI_DSIM
 161 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 162
 163 #endif  /* __CONFIG_H */